|
|
| Line 1: |
Line 1: |
| − | = Introduction =
| + | #redirect [[MP3 player]] |
| − | The ESP module can control the MP3-player module "DRPlayer DRF0299" and the "YX5300" module with 3.5mm output for speaker(s).
| |
| − | | |
| − | == Hardware ==
| |
| − | | |
| − | Circuit wiring:
| |
| − | | |
| − | 1st-GPIO -> ESP TX to module RX
| |
| − | 5V to module VCC (can be more than 100mA), YX5300 supports 3.3-5V.
| |
| − | GND to module GND
| |
| − | Speaker to module SPK_1 and SPK_2 (not to GND!)
| |
| − | (optional) module BUSY to LED driver (low active)
| |
| − | | |
| − | = ESP Easy =
| |
| − | Use the device tab on the ESP Easy webinterface and create a new task by editing one of the available tasks. Select "Notify - " from the dropdown box.
| |
| − | | |
| − | [[File:Plugin65_Screen.png]]
| |
| − | | |
| − | Enter the GPIO pin for serial TX.
| |
| − | | |
| − | = Commands =
| |
| − | | |
| − | play,<track> Plays the n-th track 1...3000 on SD-card in root folder. The track number is the physical order - not the order displayed in file explorer!
| |
| − | stop Stops actual playing sound
| |
| − | vol,<volume> Set volume level 1...30
| |
| − | eq,<type> Set the equalizer type 0=Normal, 1=Pop, 2=Rock, 3=Jazz, 4=classic, 5=Base (IS NOT SUPPORTED BY YX5300)
| |
