Difference between revisions of "Tutorial Domoticz Switch"

From Let's Control It
Jump to navigation Jump to search
(Created page with "This tutorial will guide you to connect your first ESP Easy switch to Domoticz. We expect that you have a working Domoticz setup and have loaded the ESP Easy firmware onto you...")
 
Line 3: Line 3:
 
Domoticz Menu -> Setup -> Hardware
 
Domoticz Menu -> Setup -> Hardware
  
−
- Select Type "Dummy (Does nothing, use for virtual switches only)"
+
[[File:Tutorial_Domoticz_Menu.png]]
−
- Click Add
+
 
−
- The new hardware should be in the list and there should be a button "Create Virtual Sensors"
+
And add following hardware to you system:
−
- Click this button and choose Sensor Type
+
 
−
- As an example, select Temperature and clock OK
+
[[File:Tutorial_Domoticz_Add_Hardware.png]]
 +
 
 +
The new hardware should be in the list and there should be a button "Create Virtual Sensors"
 +
 
 +
[[File:Tutorial_Domoticz_Create_Sensor.png]]
 +
 
 +
Click this button and choose Sensor Type "Switch"
 +
 
 +
[[File:Tutorial_Domoticz_Add_Sensor.png]]
  
 
Domoticz Menu -> Setup -> Devices
 
Domoticz Menu -> Setup -> Devices
  
−
- Your new temperature device should be listed here
+
[[File:Tutorial_Domoticz_Menu.png]]
−
- Click the little green button with the arrow pointing in the right direction to add this device
+
 
−
- Name this device, does not matter what name and click add device
+
Your new temperature device should be listed here
 +
 
 +
[[File:Tutorial_Domoticz_Device_List.png]]
 +
 
 +
Click the little green button with the arrow pointing in the right direction to add this device
 +
 
 +
[[File:Tutorial_Domoticz_Device_Add.png]]
 +
 
 +
Name this device "Demo" and click add device.
 +
 
 +
Navigate to menu "Switches" and your device should be listed:
 +
 
 +
[[File:Tutorial_Domoticz_Device.png]]

Revision as of 09:16, 29 August 2015

This tutorial will guide you to connect your first ESP Easy switch to Domoticz. We expect that you have a working Domoticz setup and have loaded the ESP Easy firmware onto your ESP.

Domoticz Menu -> Setup -> Hardware

Tutorial Domoticz Menu.png

And add following hardware to you system:

Tutorial Domoticz Add Hardware.png

The new hardware should be in the list and there should be a button "Create Virtual Sensors"

Tutorial Domoticz Create Sensor.png

Click this button and choose Sensor Type "Switch"

Tutorial Domoticz Add Sensor.png

Domoticz Menu -> Setup -> Devices

Tutorial Domoticz Menu.png

Your new temperature device should be listed here

Tutorial Domoticz Device List.png

Click the little green button with the arrow pointing in the right direction to add this device

Tutorial Domoticz Device Add.png

Name this device "Demo" and click add device.

Navigate to menu "Switches" and your device should be listed:

Tutorial Domoticz Device.png

Retrieved from "http://www.letscontrolit.com/wiki/index.php?title=Tutorial_Domoticz_Switch&oldid=189"