Difference between revisions of "ESPEasy System Variables"

From Let's Control It
Jump to navigation Jump to search
Line 4: Line 4:
 
These can be used in templates for HTTP, MQTT, OLED and LCD displays and within rules:
 
These can be used in templates for HTTP, MQTT, OLED and LCD displays and within rules:
  
−
%sysname% - Name as configured through the webgui
+
{| class="wikitable"
−
%systime% - Current time if NTP is enabled (hh:mm:ss, hh:mm prior to v2.0)
+
! Syntax
−
%systm_hm% - Current time if NTP is enabled (hh:mm "old behavior")
+
! Example output
−
%systime_am% - Current AM/PM time if NTP is enabled (hh:mm:ss xM)
+
! Extra information
−
%systm_hm_am% - Current AM/PM time if NTP is enabled (hh:mm xM)
+
|-
−
%lcltime% - Current date/time if NTP is enabled (YYYY-MM-DD hh:mm:ss, HH:MM)
+
 
−
%lcltime_am% - Current date/time (AM/PM) if NTP is enabled (YYYY-MM-DD hh:mm:ss xM)
+
| %sysname%
−
%syshour% - hh
+
| ESP_Easy
−
%sysmin% - mm
+
| Name as configured through the webgui.
−
%syssec% - ss
+
|-
−
%sysday% - DD
+
 
−
%sysmonth% - XX
+
| %systime%
−
%sysyear% - 4 digits - 2017
+
| 01:23:54
−
%sysyears% - 2 digits - 17
+
| Current time if NTP is enabled (hh:mm:ss, hh:mm prior to v2.0).
−
%sysweekday% - Weekday (integer) - 1, 2, 3... (1=Sunday, 2=Monday etc.)
+
|-
−
%sysweekday_s% - Weekday (verbose) - Sun, Mon, Tue...
+
 
−
%uptime% - Uptime in minutes
+
| %systm_hm%
−
%rssi% - WiFi signal strength
+
| 01:23
−
%ip% - Current IP address
+
| Current time if NTP is enabled (hh:mm "old behavior").
−
%unit% - Unit number
+
|-
−
%ssid% - Name of current WiFi
+
 
−
%vcc% - VCC value, this is only available in the VCC versions of FW.
+
| %systime_am%
−
%mac% - MAC address
+
| 1:23:54 AM
−
%mac_int% - MAC address in integer to be used in rules (only the last 24 bit)
+
| Current AM/PM time if NTP is enabled (hh:mm:ss xM).
 +
|-
 +
 
 +
| %systm_hm_am%
 +
| 1:23 AM
 +
| Current AM/PM time if NTP is enabled (hh:mm:ss xM).
 +
|-
 +
 
 +
| %lcltime%
 +
| 2018-03-16 01:23:54
 +
| Current date/time if NTP is enabled (YYYY-MM-DD hh:mm:ss).
 +
|-
 +
 
 +
| %lcltime_am%
 +
| 2018-03-16 1:23:54 AM
 +
| Current date/time (AM/PM) if NTP is enabled (YYYY-MM-DD hh:mm:ss xM).
 +
|-
 +
 
 +
| %syshour%
 +
| 11
 +
| Current hour (hh).
 +
|-
 +
 
 +
| %sysmin%
 +
| 22
 +
| Current minute (mm).
 +
|-
 +
 
 +
| %syssec%
 +
| 33
 +
| Current second (ss).
 +
|-
 +
 
 +
| %sysday%
 +
| 16
 +
| Current day of month (DD).
 +
|-
 +
 
 +
| %sysmonth%
 +
| 3
 +
| Current month (MM).
 +
|-
 +
 
 +
| %sysyear%
 +
| 2018
 +
| 4 digits (YYYY).
 +
|-
 +
 
 +
| %sysyears%
 +
| 18
 +
| 2 digits (YY).
 +
|-
 +
 
 +
| %sysweekday%
 +
| 5
 +
| Weekday (integer) - 1, 2, 3... (1=Sunday, 2=Monday etc.).
 +
|-
 +
 
 +
| %sysweekday_s%
 +
| Fri
 +
| Weekday (verbose) - Sun, Mon, Tue...
 +
|-
 +
 
 +
| %uptime%
 +
| 3244
 +
| Uptime in minutes.
 +
|-
 +
 
 +
| %rssi%
 +
| -45
 +
| WiFi signal strength (dBm).
 +
|-
 +
 
 +
| %ip%
 +
| 192.168.0.123
 +
| Current IP address.
 +
|-
 +
 
 +
| %unit%
 +
| 32
 +
| Unit number.
 +
|-
 +
 
 +
| %ssid%
 +
| H4XX0R njietwork!
 +
| Name of current WiFi.
 +
|-
 +
 
 +
| %VCC%
 +
| 5.2
 +
| VCC value, this is only available in the VCC versions of FW.
 +
|-
 +
 
 +
| %mac%
 +
| 00:14:22:01:23:45
 +
| MAC address.
 +
|-
 +
 
 +
| %mac_int%
 +
| 2212667
 +
| MAC address in integer to be used in rules (only the last 24 bit).
 +
|-
 +
 
 +
|}
  
 
More uses of these system variables can be seen in the [[Tutorial_Rules|rules section]] and [[EasyFormula|formula section]].
 
More uses of these system variables can be seen in the [[Tutorial_Rules|rules section]] and [[EasyFormula|formula section]].

Revision as of 13:36, 16 March 2018

ESP Easy system variables:

Generic: These can be used in templates for HTTP, MQTT, OLED and LCD displays and within rules:

Syntax Example output Extra information
%sysname% ESP_Easy Name as configured through the webgui.
%systime% 01:23:54 Current time if NTP is enabled (hh:mm:ss, hh:mm prior to v2.0).
%systm_hm% 01:23 Current time if NTP is enabled (hh:mm "old behavior").
%systime_am% 1:23:54 AM Current AM/PM time if NTP is enabled (hh:mm:ss xM).
%systm_hm_am% 1:23 AM Current AM/PM time if NTP is enabled (hh:mm:ss xM).
%lcltime% 2018-03-16 01:23:54 Current date/time if NTP is enabled (YYYY-MM-DD hh:mm:ss).
%lcltime_am% 2018-03-16 1:23:54 AM Current date/time (AM/PM) if NTP is enabled (YYYY-MM-DD hh:mm:ss xM).
%syshour% 11 Current hour (hh).
%sysmin% 22 Current minute (mm).
%syssec% 33 Current second (ss).
%sysday% 16 Current day of month (DD).
%sysmonth% 3 Current month (MM).
%sysyear% 2018 4 digits (YYYY).
%sysyears% 18 2 digits (YY).
%sysweekday% 5 Weekday (integer) - 1, 2, 3... (1=Sunday, 2=Monday etc.).
%sysweekday_s% Fri Weekday (verbose) - Sun, Mon, Tue...
%uptime% 3244 Uptime in minutes.
%rssi% -45 WiFi signal strength (dBm).
%ip% 192.168.0.123 Current IP address.
%unit% 32 Unit number.
%ssid% H4XX0R njietwork! Name of current WiFi.
%VCC% 5.2 VCC value, this is only available in the VCC versions of FW.
%mac% 00:14:22:01:23:45 MAC address.
%mac_int% 2212667 MAC address in integer to be used in rules (only the last 24 bit).

More uses of these system variables can be seen in the rules section and formula section.

Retrieved from "http://www.letscontrolit.com/wiki/index.php?title=ESPEasy_System_Variables&oldid=4106"