ESPEasy System Variables

ESP Easy system variables:

Generic: These can be used in templates for HTTP, MQTT, OLED and LCD displays and within rules:

Syntax	Example output	Extra information
%sysname%	ESP_Easy	Name as configured through the webgui.
%systime%	01:23:54	Current time if NTP is enabled (hh:mm:ss, hh:mm prior to v2.0).
%systm_hm%	01:23	Current time if NTP is enabled (hh:mm "old behavior").
%systime_am%	1:23:54 AM	Current AM/PM time if NTP is enabled (hh:mm:ss xM).
%systm_hm_am%	1:23 AM	Current AM/PM time if NTP is enabled (hh:mm:ss xM).
%lcltime%	2018-03-16 01:23:54	Current date/time if NTP is enabled (YYYY-MM-DD hh:mm:ss).
%lcltime_am%	2018-03-16 1:23:54 AM	Current date/time (AM/PM) if NTP is enabled (YYYY-MM-DD hh:mm:ss xM).
%syshour%	11	Current hour (hh).
%sysmin%	22	Current minute (mm).
%syssec%	33	Current second (ss).
%sysday%	16	Current day of month (DD).
%sysmonth%	3	Current month (MM).
%sysyear%	2018	4 digits (YYYY).
%sysyears%	18	2 digits (YY).
%sysweekday%	5	Weekday (integer) - 1, 2, 3... (1=Sunday, 2=Monday etc.).
%sysweekday_s%	Fri	Weekday (verbose) - Sun, Mon, Tue...
%uptime%	3244	Uptime in minutes.
%rssi%	-45	WiFi signal strength (dBm).
%ip%	192.168.0.123	Current IP address.
%unit%	32	Unit number.
%ssid%	H4XX0R njietwork!	Name of current WiFi.
%vcc%	5.2	VCC value, this is only available in the VCC versions of FW.
%mac%	00:14:22:01:23:45	MAC address.
%mac_int%	2212667	MAC address in integer to be used in rules (only the last 24 bit).

More uses of these system variables can be seen in the rules section and formula section.