LevelControl
Many people have requested some sort of local level control on the ESP Easy. This is something that would normally be handled by the Home Automation controller. But if you really need to have something like a locally controlled heater, you could use the Level Control plugin.
Introduction
The ESP module can be used as a level controlling device, think of a simple temperature control unit. Use a DS18B20 temperature sensor and a solid state relay to control a heater. Connect this solid state relay to a GPIO pin.
Hardware
Depends on what you want to control. For a 220 Volts heater, you could use classic or solid state relay.
Connections
You need to connect a relay to the selected GPIO.
Software
ESP Easy
You have to enter some IDX, even if this is not used. In this sample, we have connected a DS18B20 sensor and the heater is controlled using GPIO 12. We have set the required temperature to 21 degree with a hysteresis of 1 degree.
