TSL2561
Contents
Introduction
The ESP module can read a BH1750 Lux sensor using the I2C protocol.
The BH1750 sensor needs to be connected to a the I2C pins on the ESP module. These pins can be configured on the hardware tab.
Hardware
The TLS2561 sensor can be connected directly to an ESP module by using the two pins SDA and SCL.
Software
Custom Sketch
ESP Easy
Use the device tab on the ESP Easy webinterface and create a new task by editing one of the available tasks. Select "Luminosity TLS2561" from the dropdown box.
File:EasyConfigLUX2.png
Enter the IDX found in the Domoticz device page. That should be all.
Optional settings
ESP Connexio
Syntax: LUXRead "var"
