ESPEasy System Variables
Revision as of 07:07, 13 March 2018 by Grovkillen (talk | contribs)
ESP Easy system variables:
Generic: These can be used in templates for HTTP, MQTT, OLED and LCD displays and within rules:
%sysname% - Name as configured through the webgui %systime% - Current time if NTP is enabled (hh:mm:ss, hh:mm prior to v2.0) %systime_am% - Current AM/PM time if NTP is enabled (hh:mm xM) %lcltime% - Current date/time if NTP is enabled (YYYY-MM-DD hh:mm:ss, HH:MM) %lcltime_am% - Current date/time (AM/PM) if NTP is enabled (YYYY-MM-DD hh:mm xM) %syshour% - hh %sysmin% - mm %syssec% - ss %sysday% - DD %sysmonth% - XX %sysyear% - 4 digits - 2017 %sysyears% - 2 digits - 17 %sysweekday% - Weekday (integer) - 1, 2, 3... (1=Sunday, 2=Monday etc.) %sysweekday_s% - Weekday (verbose) - Sun, Mon, Tue... %uptime% - Uptime in minutes %rssi% - WiFi signal strength %ip% - Current IP address %unit% - Unit number %ssid% - Name of current WiFi %vcc% - VCC value, this is only available in the VCC versions of FW. %mac% - MAC address %mac_int% - MAC address in integer to be used in rules (only the last 24 bit)
More uses of these system variables can be seen in the rules section and formula section.