PCF8591
Jump to navigation
Jump to search
Contents
Introduction
The ESP-01 module has no analog input. Only boards like the ESP-07 and ESP-12 break out the single ADC (TOUT) pin on the ESP chip. But we can provide all ESP modules with 4 analog inputs using the PCF8591 I2C ADC chip.
Hardware
The PCF8591 can be bought on eBay as a bare chip or a plug and play module.
Software
Custom Sketch
ESP Easy
Use the device tab on the ESP Easy webinterface and create a new task by editing one of the available tasks. Select "PCF8591 Analog input" from the dropdown box.
Enter the IDX found in the Domoticz device page. Also select the port on the PCF8591 that you want to read (Numbered 0 - 3). That should be all.
Optional settings
ESP Connexio
Command:
ExtWiredAnalog <poort>, <Variabele>
| Parameter: | Beschrijving: | Bereik: | Opmerking: |
|---|---|---|---|
| Poort | 1 t/m 32 | ||
| Variabele | 1 t/m 15 |
Sample
ExtWiredAnalog 1,3
