UPyEasy

You may hear some construction noise in the background...

Experimental !

Introduction

A project initiated by LisaM, inspired by ESPEasy but a total rebuild from scratch, developed using microPython.

Currently running on STM and ESP32 platforms

uPyEasy has the following requirements (Last updated: 14*01*2018 ):

• Written in Python
• Multiple platforms (basically all platforms supported by micropython, basic testing/development done on Linux/PyBoard/NodeMCU/ESP*01)
• Async webserver
• Template based webpages (attached the homepage as example)
• Lan/WLan transparancy
• Support for GPIO, I2C, SPI, UART, I2S and CAN interface protocol
• SSL support (server and client)
• Minimalistic HAL
• Maximum reuse of libraries
• Rules in python (unleashing really powerfull rules!)
• Override in plugins (custom plugins overrule standard plugins)
• Plugin drag 'n drop (limited in smaller soc's due to memory constraints)
• Support of ANY library that is supported in micropython
• Support of viper speed
• Dynamic support of SD card
• Support of psRam
• Use of FileDB to store config and other values
• Bootloader supporting OTA firmware updates (Yaota8266, 247KB), meaning 1MB esp's will have 750KB free at most when using OTA.
• i18n support

Supporting documents can be found here: https://github.com/letscontrolit/uPyEasy/tree/master/docs