Search found 116 matches
- 19 Nov 2023, 16:02
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
thx for the help. I got it working now
- 06 Nov 2023, 18:26
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
Looks like that it is wat i am looking for.
To customize i have to change the following:
SDM630_L1
idx":2282,"
"%eventvalue2%"
Is this : domoticz/in to send it to mqtt in Domoticz?
To customize i have to change the following:
SDM630_L1
idx":2282,"
"%eventvalue2%"
Is this : domoticz/in to send it to mqtt in Domoticz?
- 05 Nov 2023, 20:08
- Forum: ESP Easy: Software
- Topic: rules
- Replies: 5
- Views: 2292
Re: rules
we are talking in circels unfortunally.
that is wat is working but i have to split the valeus to use them in Domoticz
that is wat is working but i have to split the valeus to use them in Domoticz
- 05 Nov 2023, 16:40
- Forum: ESP Easy: Software
- Topic: rules
- Replies: 5
- Views: 2292
Re: rules
could you give me an example for this?
- 05 Nov 2023, 16:24
- Forum: ESP Easy: Software
- Topic: rules
- Replies: 5
- Views: 2292
rules
I want to send values from my SDM 630 via rules to Domoticz. I tried this rule: on Laadpaal#V_L1 do SendToHTTP 192.168.1.167,8888,/json.htm?type=command¶m=udevice&idx=938&nvalue=0&svalue=[Laadpaal#V_L1] //Own made up IDX 123456 endon The ESP sends the value to Domoticz but Domoti...
- 04 Nov 2023, 17:27
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
Correct en i hoped someone already made it
- 04 Nov 2023, 14:12
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
I get the info into domoticz. But making it workable in domoticz is a challange
- 04 Nov 2023, 13:36
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
This is working and that is great.
Does annyone has anny thoughts of how to get the info into Domoticz?
Does annyone has anny thoughts of how to get the info into Domoticz?
- 14 Aug 2023, 21:03
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
- 14 Aug 2023, 20:49
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
- 14 Aug 2023, 18:05
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
which version of espeasy are you using?
- 10 Aug 2023, 21:36
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
Bij mij werkt de SDM630 nu
bedankt TD-er voor je werk
bedankt TD-er voor je werk
- 03 Aug 2023, 17:56
- Forum: ESP Easy: Hardware
- Topic: Non-Contact Water/Liquid Level Sensor CQRSENYW001
- Replies: 14
- Views: 2549
Re: Non-Contact Water/Liquid Level Sensor CQRSENYW001
When i look at the specs. Your sensors output is current (0-50 mA). The analoge inputs are made for xxx measurement. I think that the way forward is this:
https://www.letscontrolit.com/wiki/inde ... tle=INA219
https://www.letscontrolit.com/wiki/inde ... tle=INA219
- 31 Jul 2023, 20:20
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
Dear I have tried the newer versions of the bin's. Non of them are working for mee. In wat version are we working? I try at this moment: Build: ESP_Easy_mega_20230728_energy_ESP8266_4M1M Jul 28 2023 Let me know if you succeed I have that one installed. But when i activate the task for the meter it ...
- 31 Jul 2023, 20:05
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
Dear I have tried the newer versions of the bin's. Non of them are working for mee. In wat version are we working? I try at this moment: Build: ESP_Easy_mega_20230728_energy_ESP8266_4M1M Jul 28 2023 Let me know if you succeed I have that one installed. But when i activate the task for the meter it ...
- 31 Jul 2023, 17:44
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
Dear
I have tried the newer versions of the bin's. Non of them are working for mee. In wat version are we working?
I have tried the newer versions of the bin's. Non of them are working for mee. In wat version are we working?
- 19 Jul 2023, 18:46
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
I loaded the new bin. The esp is now rebooting every 2 minit. The reason is Exception (97) en the load is continues at 100%
PLUGIN_READ: timer, id: 0
PLUGIN_READ: timer, id: 0
- 18 Jul 2023, 17:21
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
There is a pending PR to extend the Eastron plugin to support all register types of all their meters. I just updated the PR for it so it will generate a new test build. In about 30 - 40 minutes a test build will be ready here: https://github.com/letscontrolit/ESPEasy/actions/runs/5580511157 I think...
- 17 Jul 2023, 23:05
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
In the meter stands modbus and not mbus so i think i have A modbus version. You can see that on the pictures.
- 17 Jul 2023, 23:05
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
In the meter stands modbus and not mbus so i think i have A modbus version. You can see that on the pictures.
- 17 Jul 2023, 22:16
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
could my problem be that my eastron SDM630 is a modbus V2?
- 17 Jul 2023, 21:57
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
I have to look if i have such convertor. I will try tommorrow
thx for now
thx for now
- 17 Jul 2023, 17:51
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
the only thing that strikes me is that I see the following in the device settings list:
Checksum (pass/fail): 0/768
Checksum (pass/fail): 0/768
- 17 Jul 2023, 17:41
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
It looks like you're powering the MAX485 via 3V3. Not all MAX485 chips work well at 3V3. However you have the chip connected to the pins for Serial0. These pins are also connected to the USB to serial chip on board. I don't know if the MAX485 will output higher voltages on its TX pin when powered v...
- 17 Jul 2023, 06:22
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
- 16 Jul 2023, 20:43
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
- 16 Jul 2023, 16:31
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
- 16 Jul 2023, 16:16
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
- 16 Jul 2023, 16:02
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
The picture of the baud rate is a bit unclear as the decimal dot (if any) isn't visible at this viewing angle. So if there isn't a decimal dot, then you actually set it to 96000 baud. This would be a really strange setting, but maybe you can verify there actually is a decimal dot, or the documentat...
- 16 Jul 2023, 16:00
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Re: Eastron SDM 630 Energy
It might help if during boot you have the plugin disabled, and with a small delay, enable it from rules, like this: on System#Boot do TimerSet,1,10 endon on Rules#Timer=1 do TaskEnable,Laadpaal endon Rationale: During boot the serial port is enabled, and assigned to the serial console. After a few ...
- 16 Jul 2023, 14:02
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM 630 Energy
- Replies: 105
- Views: 141951
Eastron SDM 630 Energy
I'm working on connecting an Eastron SDM630 modbus version 2 to an ESPeasy with P078 on it. This doesn't really work for me. The main issue is that there are know readings from the SDM630 Can someone help me? This is how i set the esp up with hw serial off in the advanced menu: Schermafbeelding 2023...
- 10 Aug 2019, 17:41
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 3607754
Re: Nextion display plugin
is there further development? The nextion works for me but better integration with domoticz wood be great
- 08 Aug 2019, 10:04
- Forum: ESP Easy: General Discussion
- Topic: Hardware Watchdog Reboots
- Replies: 219
- Views: 322854
Re: Hardware Watchdog Reboots
the wd boots are back
It looks like the lower the wifi signal the more reboots there are
It looks like the lower the wifi signal the more reboots there are
- 06 Aug 2019, 20:23
- Forum: ESP Easy: General Discussion
- Topic: Hardware Watchdog Reboots
- Replies: 219
- Views: 322854
Re: Hardware Watchdog Reboots
mega-20190805 norrmal 4mb
I do not know if the recent update includes the correction but since the installation no watchdog reboots and 1 day uptime.
I do not know if the recent update includes the correction but since the installation no watchdog reboots and 1 day uptime.
- 25 Nov 2018, 18:24
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 3607754
- 25 Nov 2018, 13:03
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 3607754
Re: Nextion display plugin
I want to order a Nextion display so i can use it on my BBQ controller. My question is does this plugin also works with the improved nextion display??
- 15 Feb 2018, 22:16
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 168580
Re: STM32 boards
>>> import upyeasy >>> upyeasy.setnet(1,'A4','A3') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "upyeasy/__init__.py", line 23, in setnet File "upyeasy/utils.py", line 30, in setnet File "filedb.py", line 70, in update AttributeE...
- 15 Feb 2018, 21:55
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 168580
Re: STM32 boards
2015-01-01 00:00:00 [debug] uPyEasy: Hal: pyboard, spi is empty: trying default! after this it locksup Is there a solution??? Hi Frank, Did you wire it according to these instructions? https://www.letscontrolit.com/forum/viewtopic.php?f=22&t=3905 Did you do a >>> upyeasy.setnet(1,'A4','A3')? Ch...
- 15 Feb 2018, 20:55
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 168580
Re: STM32 boards
loaded sink log loaded sink console loaded sink syslog 2015-01-01T00:00:00.003 [debug] uPyEasy: Init: Init constructor 2015-01-01T00:00:00.003 [debug] uPyEasy: Init: Entering init 2015-01-01 00:00:00 [debug] uPyEasy: Init: Create directory config 2015-01-01 00:00:00 [debug] uPyEasy: Init: Create dir...
- 09 Nov 2017, 18:09
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
for me the Pyboard (stm32 port) version
- 29 Oct 2017, 09:34
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
this looks great i hope that we can download the first test version soon
- 16 Oct 2017, 06:18
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
I'm having a hard-time with the W5500, since it's a minimalistic implementation the asyncio is giving me all kinds of exceptions... :cry: It's connecting to ethernet, but advanced stuff might not be possible. okay no problem. The w5500 is an cheap part so i will ditch it when it doesn't work an ord...
- 15 Oct 2017, 16:17
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
this is what i orderd: STM32F405RGT6 MicroPython Development Board
and an w5500
and an w5500
- 15 Oct 2017, 13:46
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
i have orderd an py board and an w5500 so i can test the system Frank, the W5500 doesn't work in the micropython master branch yet. Use this pull request instead: https://github.com/micropython/micropython/pull/3362 Based on this i orderd the 5500¨ Re: ESP Easy development status Meld dit bericht C...
- 15 Oct 2017, 09:42
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
i have orderd an py board and an w5500 so i can test the system
- 08 Oct 2017, 19:46
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 274511
Re: uPyEasy
is there a beta version lisa. i want to test the py version
- 18 Sep 2017, 19:21
- Forum: Staff Announcements forum
- Topic: ESP Easy development status
- Replies: 143
- Views: 278885
Re: ESP Easy development status
that are some great boards but expensive compared to esp 8266 boards
- 17 Sep 2017, 14:47
- Forum: Staff Announcements forum
- Topic: ESP Easy development status
- Replies: 143
- Views: 278885
Re: ESP Easy development status
this looks great LisaM. And a lot of IO. What kind of network shield are you using?
- 13 Sep 2017, 11:23
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 218361
Re: Arduino Easy 2560
i ran in a problem. I have put 4 DS18b20 on 1 pin and it worked fine for a while. But now the mega 2560 mixes up the sensors en when i go to the device number there are 30 sensors in stade of 4
- 12 Sep 2017, 21:34
- Forum: Staff Announcements forum
- Topic: ESP Easy development status
- Replies: 143
- Views: 278885
Re: ESP Easy development status
I hope that your employer pays you a lot of money for thisThis is not going fast, since lately i'm completely buried under work by my employer...