Search found 120 matches
- 27 Nov 2019, 23:39
- Forum: ESP Easy: Hardware
- Topic: More than on DS18b20 on a string.
- Replies: 14
- Views: 16569
Re: More than on DS18b20 on a string.
working like a charm!
- 26 Feb 2019, 21:35
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
crazy, could the PSU be the reason? Now I'm using a 3 amps 5VDC. Check provided voltage (not ampers), that could be a reason. Yeah correct, but I discovered that my PSU was to low in Amps like you experienced! Now my values are still verrrrrry accurate (and sometimes above 1000 :oops: ) Very happy ...
- 02 Feb 2019, 09:23
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
yes indeed, and what now? Reading in domoticz is also ok
crazy, could the PSU be the reason? Now I'm using a 3 amps 5VDC.
- 01 Feb 2019, 17:13
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
Check the modbus "permanently allow..." Praise the lord! That was the trick! :shock: :idea: :idea: :idea: :idea: :idea: :idea: After clicking on the modbus permanently allow [v] It showed up a warning: https://cdn.pbrd.co/images/HZanCuB.png Click 'yes' And then, plot twist :P :P :P :P :P ...
- 31 Jan 2019, 22:05
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
I'm back, but no luck :x connected the S8 to an FTDI chip, but the software keeps saying 'specified hardware is missing'. I powered the S8 with an external PSU en both GND the FTDI and S8 together. Any hints? https://cdn.pbrd.co/images/HZ2S0TL.png Just connected TX and RX to the S8 and FTDI, GND bot...
- 20 Jan 2019, 13:45
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
Where do you live? I want to send you some other units to test. If you buy one from my shop I'll send you 2 more. Hi, thanks for the offer! But I first want to get this one working to get some 'trust' into the s8 ;) . I'm now having one last exam next week, then I will take a look agoain on my s8. ...
- 13 Jan 2019, 10:58
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
Did some more testings, wanted to make a longer cable to run the S8 outdoors. To be sure that outdoor values are correct (400ppm). So I made a long cable to communicate with the S8 (25meters) ppm value became 10.000ppm in ESPeasy :x . Than I came up that UART can't be longer than 15meters... ok, swi...
- 08 Jan 2019, 14:31
- Forum: ESP Easy: Hardware
- Topic: Wall switch with mechanical button?
- Replies: 11
- Views: 9650
Re: Wall switch with mechanical button?
Hi, thx for info! :] >DeNB3rt: there is problem with wall box depth and relay. Maybe it's resolvable, but I'd prefer some 'certified' solution with optocoupler etc. .. >Tecumseh: same problem, depth of wall boxes is appr. 35mm, including mechanical switch. I want to replace multiple switches, I don...
- 08 Jan 2019, 08:47
- Forum: ESP Easy: Hardware
- Topic: Wall switch with mechanical button?
- Replies: 11
- Views: 9650
Re: Wall switch with mechanical button?
why not building one yourself? If you take a normal switch (or push button) from whatever dealer?
In whatever style/colour.
Give it a nodeMCU and some wires, ready
In whatever style/colour.
Give it a nodeMCU and some wires, ready
- 07 Jan 2019, 09:40
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
little update ;) Seems to give better readings since the 15sec setting :o you can see the difference when whe were out of the house, and when sleeping the ppm value got slightly higher. When we woke up you can see the value increased. Only weird thing is the spikes around 5 a.m. https://cdn.pbrd.co/...
- 05 Jan 2019, 13:33
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
Is that 15sec interval a recommended setting?
Because now my value is lower (but still to high).
- 05 Jan 2019, 12:18
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
@grovenkillen, could be. I was wondering if I could force the sensor to reset it in an outdoor environment to 400ppm. (Because mine is still giving very high values, this is in our living room and I'm still alive :D ) https://cdn.pbrd.co/images/HV1Oykx.png I found this in the manual: https://cdn.pbr...
- 05 Jan 2019, 01:40
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
Restarted testing with the AliExpress S8 sensor on 4,7VDC, readings are still very high.
2 pics of my device, seems legit
2 pics of my device, seems legit
- 01 Jan 2019, 22:14
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
hmmz my sensAir S8 is giving weird values, values are very high. Between 1500-2200 indoors and 1200 outdoors
Someone else with similar behaviour?
Someone else with similar behaviour?
- 29 Dec 2018, 03:15
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 122725
Re: Sensair S8
received my senseair S8 yesterday
Reading on the latest mega build is working fine (gave it 4,7V VCC voltage).
But when I add the default air-quality (voltcraft) in domoticz, the value remains on 0 ppm.
In the domoticz log, I see the idx arrive with it's ppm value...
Reading on the latest mega build is working fine (gave it 4,7V VCC voltage).
But when I add the default air-quality (voltcraft) in domoticz, the value remains on 0 ppm.
In the domoticz log, I see the idx arrive with it's ppm value...
- 07 May 2018, 16:47
- Forum: uPyEasy: Software
- Topic: Functionality status
- Replies: 1
- Views: 12020
Re: Functionality status
awesome
- 08 Apr 2018, 22:38
- Forum: Introduce yourself
- Topic: Hi from Belgium
- Replies: 2
- Views: 3517
Re: Hi from Belgium
hello, from what region are you? /me from Bruges
- 07 Feb 2018, 17:09
- Forum: ESP Easy: Projects / Applications
- Topic: Warning: Bug in OLED Framed plugin
- Replies: 11
- Views: 10957
Re: Warning: Bug in OLED Framed plugin
already some updates about this?
- 13 Dec 2017, 11:31
- Forum: ESP Easy: Hardware
- Topic: Using a relay (the neverending story)
- Replies: 28
- Views: 21792
- 11 Dec 2017, 11:15
- Forum: ESP Easy: Hardware
- Topic: Using a relay (the neverending story)
- Replies: 28
- Views: 21792
Re: Using a relay (the neverending story)
If you use an extender like the PCF8574 (https://www.letscontrolit.com/wiki/index.php/PCF8574)
a relay should not be doing crazy things anymore?
It states that the PCF8574 keeps the GPIO states at ESP8266 reboot.
a relay should not be doing crazy things anymore?
It states that the PCF8574 keeps the GPIO states at ESP8266 reboot.
- 23 Nov 2017, 16:49
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 202803
Re: OLED Scrolling Display
oh boy, looks like the oled-device itself should not be named oled at least with my setup, when using another name normal function is back -> and do not use V. 2 dev versions , as devs removed string upload feature to the 12 lines for some reasons. Up to v. 148 framed oled works. is there any updat...
- 23 Nov 2017, 09:56
- Forum: RFLink: Hardware Related discussions
- Topic: Cheap supported PIR sensor
- Replies: 1
- Views: 5767
Re: Cheap supported PIR sensor
microwave sensor is way better
- 23 Nov 2017, 09:55
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
Re: RCWL-0516 Microwave Motion Sensor
In the meantime, 8 day's stable
- 21 Nov 2017, 17:36
- Forum: Introduce yourself
- Topic: Hello from Belgium
- Replies: 1
- Views: 2965
Re: Hello from Belgium
welcome! Where are you from (in Belgium )
- 21 Nov 2017, 10:11
- Forum: ESP Easy: General Discussion
- Topic: Failed to get a AP/Hotspot
- Replies: 4
- Views: 4289
Re: Failed to get a AP/Hotspot
Isn't this the same question like here?
viewtopic.php?f=4&t=3785&p=20905#p20905
viewtopic.php?f=4&t=3785&p=20905#p20905
- 21 Nov 2017, 10:10
- Forum: ESP Easy: General Discussion
- Topic: how remove esp from old modem and add to new modem? please help
- Replies: 2
- Views: 3361
Re: how remove esp from old modem and add to new modem? please help
can you connect the ESP module via usb/serial to a computer? Then you can reach it through serial monitor to change settings: >wifissid ***yourwifiaAPname*** Ok WD : Uptime 9 ConnectFailures 0 FreeMem 17816 >Wifikey ****yourwifikey**** Ok WD : Uptime 9 ConnectFailures 0 FreeMem 17816 >wificonnect WI...
- 21 Nov 2017, 09:55
- Forum: ESP Easy: Hardware
- Topic: Using a relay (the neverending story)
- Replies: 28
- Views: 21792
Re: Using a relay (the neverending story)
relay's I hate them
- 31 Oct 2017, 01:05
- Forum: ESP Easy: Projects / Applications
- Topic: espeasy or other ESP8266 halloween projects
- Replies: 3
- Views: 4484
Re: espeasy or other ESP8266 halloween projects
This is my halloween project 'haunted house', not very much logic, 2 relay's with some arduino code for the faulty lights, 2 leds for the handmade ghost and both remote controlled by espeasy.
https://www.youtube.com/watch?v=71zimDC ... e=youtu.be
https://www.youtube.com/watch?v=71zimDC ... e=youtu.be
- 23 Oct 2017, 15:40
- Forum: ESP Easy: Projects / Applications
- Topic: My ESP Easy projects
- Replies: 7
- Views: 10558
Re: My ESP Easy projects
+1 for all centralized
- 23 Oct 2017, 15:39
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
Re: RCWL-0516 Microwave Motion Sensor
Sensor worked very well for about 4 day's, and then the mystery continued, False inputs all the way https://snag.gy/yZIvhR.jpg Then I just unplugged the 5v source of just the sensor, all ok again. Now again working like a charm: https://snag.gy/Twl0ie.jpg maybe because of ghosts with halloween? :D I...
- 22 Oct 2017, 10:58
- Forum: ESP Easy: General Discussion
- Topic: MQTT help
- Replies: 4
- Views: 5442
Re: MQTT help
Hi Dylantje Setting up MQTT on rbpi is very easy. Follow https://www.domoticz.com/wiki/MQTT#Installing_Mosquitto In short I did this: Ssh to rbpi not enough rights, “Sudo su” “Apt-get install mosquitto” Library outdated? “Apt-get update” again “apt-get install mosquito” mosquito installed! Then add ...
- 17 Oct 2017, 15:33
- Forum: ESP Easy: Projects / Applications
- Topic: My ESP Easy projects
- Replies: 7
- Views: 10558
Re: My ESP Easy projects
don't you have more pictures for us, we like setupzzz
- 17 Oct 2017, 15:29
- Forum: ESP Easy: General Discussion
- Topic: WPA2 weakness discovered (KRACK)
- Replies: 5
- Views: 5660
Re: WPA2 weakness discovered (KRACK)
My thoughts yesterday,
Create 2 wifi networks, one for ESP one for other devices (phone, laptop) with restrictions.
Disable SSID broadcast for the ESPeasy network.
Create 2 wifi networks, one for ESP one for other devices (phone, laptop) with restrictions.
Disable SSID broadcast for the ESPeasy network.
- 13 Oct 2017, 16:17
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
Re: RCWL-0516 Microwave Motion Sensor
Thanks both for the suggestions. I ordered another MW sensor to test with (RCWL-0516). Some 'false' inputs could be real inputs, because I'm testing it in a very tiny house now. within 3meters left of right is another neighbour :D . Yesterday, the constantly on/off false inputs went away after pulli...
- 13 Oct 2017, 16:05
- Forum: ESP Easy: Hardware
- Topic: My Own custom POW
- Replies: 3
- Views: 4512
Re: My Own custom POW
nice one
- 12 Oct 2017, 16:01
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
Re: RCWL-0516 Microwave Motion Sensor
In the meantime, I added the 330uF cap and 10 Ohms resistor in series.
Went very very! well for a few day's. I am/was so happy.
But since this morning again, false inputs... anyone an idea?
Went very very! well for a few day's. I am/was so happy.
But since this morning again, false inputs... anyone an idea?
- 08 Oct 2017, 11:08
- Forum: ESP Easy: Software
- Topic: openhab MQTT connection lost
- Replies: 25
- Views: 20485
Re: openhab MQTT connection lost
I had the same problems when more then 1 ESP** was connecting to the broker. It turned out that the device number (in the config screen) has to be unique and not zero ... This solved my problem ! -ben crap! was testing with one unit with mqtt, that was working perfectly. Later in a 'quick', I added...
- 01 Aug 2017, 10:50
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
- 26 Jul 2017, 15:24
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
Re: RCWL-0516 Microwave Motion Sensor
Hello, at first - don't trust a multimeter for dynamic voltages or such. Multimeters can only show very slow change rates. For checking such things it needs an oscilloscope. The idea of 10 ohm / capacitor is quite good. With having two high frequency sources in such a system (ESP-Chip and microwave...
- 26 Jul 2017, 09:36
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 87295
Re: Microwave Motion Sensor
Hi all Are there any others that are using Microwave motion sensors with ESPEasy? I have the xyc-wb-dc http://oi64.tinypic.com/2j5b8nd.jpg A= "+" 3.3-20VDC input "-" GND and "O" = output 0/3.3V B= R9_1 sensitivity resistor 10K > 100K C= R9 active high duration resistor,...
- 26 Jul 2017, 09:07
- Forum: ESP Easy: Hardware
- Topic: HC-SR501 PIR - stop false positives?
- Replies: 47
- Views: 102701
- 10 Jul 2017, 22:20
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
And it's fixed! Don't hit me, le dumb me found the easy fix :roll: ... I experimented with breadboards with external PSU and everything worked fine in test. But in my wall switch setup, I was using an 5v 2Amps usb power supply. Never thought that could be the issue, but there must be a power regulat...
- 29 Jun 2017, 10:01
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
Hi Paperpone I'm using a 230~ 5V- smartphone charger. I already tested with an iphone or samsung charger, but same shit :oops: The weird thing now, is that I am not able to trigger both coil's at the same time, crasy shit :D If I trigger both coils, the first triggered coil will enable, the 2nd will...
- 23 Jun 2017, 10:26
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
Dammit, setup was working perfectly for about 2 weeks (controlling my living and kitchen lights with domoticz app, web interface and MQTT button on another esp :) ) But since yesterday, again a similar problem like before. The relay was not reacting anymore on any command. But the leds on the opto d...
- 13 Jun 2017, 13:27
- Forum: ESP Easy: General Discussion
- Topic: ESP lost Wifi connection
- Replies: 4
- Views: 6628
- 13 Jun 2017, 13:25
- Forum: ESP Easy: General Discussion
- Topic: Working unit suddenly unreachable
- Replies: 5
- Views: 4425
Re: Working unit suddenly unreachable
Can you connect them with usb cable to a laptop?
Open serial monitor (arduino IDE) and reconfigure?
"WifiSSID yournetworkname"
"WifiKey yoursecretkey"
“Wificonnect”
"save"
Open serial monitor (arduino IDE) and reconfigure?
"WifiSSID yournetworkname"
"WifiKey yoursecretkey"
“Wificonnect”
"save"
- 13 Jun 2017, 10:38
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
Hi Shardan and Costo Thanks for the feedback. I did not have a lot of time the last day's do I did not see that feedback. So yesterday, I tried to sort some things out... I thought, why not replacing the relay board with a spare board just to test? Left side new board, right side old board. (here yo...
- 24 May 2017, 10:57
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
I tried what Shardan proposed. Connected 5V to JD-Vcc, both gnd's to same gnd. Connected Vcc to 3.3v. I see the led near the relay going on/off (not that bright as vcc on 5v). But the relay is not getting triggering at all. If i connect 5v to JD-Vcc and vcc (like it was before) the led is also going...
- 22 May 2017, 10:40
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
Well, i've done some research to find your module. What i see is it's running on 5V, and normally the 5V is connected to the electronic circuit too. (Jumper from JD-Vcc to Vcc). According to the offers at AliExpress the opto couplers are "low level triggered". This says that the opto coup...
- 20 May 2017, 13:36
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 30240
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
In the meantime, tested with separate power source to power the relay board, still the same.
So could that realy be the 3.3v vs 5v issue?
So could that realy be the 3.3v vs 5v issue?