Search found 307 matches
- 16 Mar 2018, 23:17
- Forum: ESP Easy: General Discussion
- Topic: Dynamic SleepMode
- Replies: 11
- Views: 9854
Re: Dynamic SleepMode
Thanks arion_p. I finaly solved my NTP time problem: a local server was needed for a reliable NTP at start-up. Now I use this Rule: On System#Boot do OLEDCMD,on endon on System#Sleep do OLEDCMD,off if %systime% > 19:00:00 or %systime% < 05:00:00 deepSleep,3600 //60 minutes endif // otherwise let the...
- 16 Mar 2018, 15:38
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 54006
Re: Stepper Motor
Strange answer ..
With a small electronic modification and an intelligent A4988 driver you can use the software you asked me for (without overloading the ESP).
As TD-er commented here: https://github.com/letscontrolit/ESPEas ... -373406715
With a small electronic modification and an intelligent A4988 driver you can use the software you asked me for (without overloading the ESP).
As TD-er commented here: https://github.com/letscontrolit/ESPEas ... -373406715
- 15 Mar 2018, 21:05
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 54006
Re: Stepper Motor
System design is the right balance between mechanics,electrics and software. I think the A4988 driver is much simpler (1 control signal step ) then the ULN2003 and less load for ESP. 874385874_830-images.jpg The 28BYJ-48 motor can run with the A4988 after a small motor modification: http://2.bp.blog...
- 14 Mar 2018, 18:19
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 54006
Re: Stepper Motor
The while loop code contains yield();
So I think it is non-blocking.
Stop? ... just give it a try
My coding skills are more than 40 years old,
so I hardly understood what I have modified.
So I think it is non-blocking.
Stop? ... just give it a try
My coding skills are more than 40 years old,
so I hardly understood what I have modified.
- 13 Mar 2018, 17:56
- Forum: ESP Easy: General Discussion
- Topic: Dynamic SleepMode
- Replies: 11
- Views: 9854
Re: Dynamic SleepMode
Top!
I will give it a try.
Thanks
I will give it a try.
Thanks
- 13 Mar 2018, 10:50
- Forum: ESP Easy: General Discussion
- Topic: Dynamic SleepMode
- Replies: 11
- Views: 9854
Dynamic SleepMode
I like to measure the sun energy with a SI1145 on a regular interval. It will be a solar powered battery set-up. I prefer a 1 minute sleep cycle for the next measurement during day-time. During night hours this 1 minute cycle is useless and a waste of battery energy. The SleepMode has a static sleep...
- 12 Mar 2018, 22:02
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 54006
Re: Stepper Motor
https://we.tl/vjC6hhH6tL
7days means ... 7days
7days means ... 7days
- 08 Mar 2018, 14:15
- Forum: ESP Easy: General Discussion
- Topic: rtttl play on mqtt message?
- Replies: 23
- Views: 14233
Re: rtttl play on mqtt message?
@Mr Wiki Grovkillen
https://www.letscontrolit.com/wiki/inde ... _interfaceNTP Hostname Can be left empty as it defaults to pool.ntp.org. Can be changed here if needed.
- 05 Mar 2018, 16:59
- Forum: ESP Easy: General Discussion
- Topic: Some questions from an old Nodo user
- Replies: 2
- Views: 2804
Re: Some questions from an old Nodo user
Take a look here:
https://github.com/letscontrolit
https://github.com/letscontrolit
- 04 Mar 2018, 20:28
- Forum: ESP Easy: Hardware
- Topic: Sonoff Basic + wall push button with pilot light
- Replies: 21
- Views: 16767
Re: Sonoff Basic + wall push button with pilot light
Use the internal pull-up for GPIO14 ?
Or
Use a pull-up resistor of 100K for GPIO14 to 3V3?
Or
Use a pull-up resistor of 100K for GPIO14 to 3V3?
- 04 Mar 2018, 20:18
- Forum: ESP Easy: Software
- Topic: Store Espeasy State
- Replies: 9
- Views: 7971
Re: Store Espeasy State
Not supported yet in ESPEasy, but nice ;) https://nl.aliexpress.com/item/FM24CLXX-FRAM-Board-FM24CL16-F-RAM-Serial-3-3V-Memory-Evaluation-Development-Kit/753381197.html?spm=a2g0z.10010108.1000016.1.3c31590aJBNRD5&isOrigTitle=true Or .. Wemos D1 with battery shield? In Spain ... maintained by a s...
- 04 Mar 2018, 01:01
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 Mini flashed but no Access Point
- Replies: 4
- Views: 4285
Re: Wemos D1 Mini flashed but no Access Point
A Wemos "fake" problem?
See viewtopic.php?f=4&t=4902#p25090
See viewtopic.php?f=4&t=4902#p25090
- 03 Mar 2018, 22:53
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 Mini flashed but no Access Point
- Replies: 4
- Views: 4285
Re: Wemos D1 Mini flashed but no Access Point
Power supply problem? During WiFi activity the ESP is power hungry. An USB port is often not delivering enough The Wiki: USB power supply If you want to use a USB charger as a power supply, make sure it has a CE marking and delivers enough current. 1 Ampere is the least. https://www.letscontrolit.co...
- 03 Mar 2018, 11:06
- Forum: ESP Easy: Software
- Topic: Debugging crashes
- Replies: 5
- Views: 3814
Re: Debugging crashes
power is providing 400 mA, should be sufficient. I doubt. During WiFi activity the ESP is power hungry. The Wiki: USB power supply If you want to use a USB charger as a power supply, make sure it has a CE marking and delivers enough current. 1 Ampere is the least. https://www.letscontrolit.com/wiki...
- 03 Mar 2018, 10:57
- Forum: ESP Easy: Software
- Topic: Need some help with a complex rule set...
- Replies: 6
- Views: 5165
Re: Need some help with a complex rule set...
Check the pairs:
On ...EndOn
If ....EndIf
On ...EndOn
If ....EndIf
- 28 Feb 2018, 13:20
- Forum: ESP Easy: General Discussion
- Topic: Can't connect to ESP unit with static IP
- Replies: 19
- Views: 16442
Re: Can't connect to ESP unit with static IP
I see a lot of different observations: - can reach / can not reach - some computers can reach / others can not reach - ping time long-short-long-short Wifi transmission is power hungry! Are you sure about your powersupply and cable? ESP8266 development board Is this a Wemos D1 mini? Without branding...
- 27 Feb 2018, 23:38
- Forum: ESP Easy: General Discussion
- Topic: Can't connect to ESP unit with static IP
- Replies: 19
- Views: 16442
Re: Can't connect to ESP unit with static IP
Lijkt dus een WIN10 probleem.3. Windows 10, Google Chrome, ESPEasy webinterface werkt niet.
Probeer eens een ping vanaf die WIN10 computer.
Zijn 192.168.2.5 en 192.168.2.6 wel ping-able vanaf die WIN10 computer?
- 27 Feb 2018, 22:19
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 54006
- 27 Feb 2018, 17:57
- Forum: ESP Easy: General Discussion
- Topic: Cannot login to ESPEasy
- Replies: 9
- Views: 7749
- 25 Feb 2018, 18:35
- Forum: ESP Easy: General Discussion
- Topic: Boot time very high
- Replies: 5
- Views: 7065
Re: Boot time very high
Talking about an official Wemos D1 or a fake ? This is the official: 5-Stks-partij-D1-mini-Mini-Voor-NodeMcu-4-M-bytes-Lua-WIFI-Internet-van-Dingen.jpg From here https://nl.aliexpress.com/item/5PCS-lot-D1-mini-Mini-NodeMcu-4M-bytes-Lua-WIFI-Internet-of-Things-development-board-based/32776267757.html...
- 21 Feb 2018, 20:18
- Forum: ESP Easy: General Discussion
- Topic: Current monitoring with ESPEasy
- Replies: 9
- Views: 8340
Re: Current monitoring with ESPEasy
And how about this one? A DC version: https://ae01.alicdn.com/kf/HTB1xkXpMpXXXXXLXpXXq6xXFXXXT/200286647/HTB1xkXpMpXXXXXLXpXXq6xXFXXXT.jpg?size=240143&height=1278&width=1000&hash=fb6d3da8b7cdd93eb0878d0fbdbf1f92 https://nl.aliexpress.com/item/YHDC-SCTD010T-AC-Input-0-5A-DC-Output-0-5V-Sp...
- 17 Feb 2018, 16:49
- Forum: ESP Easy: Software
- Topic: How to control 1-wire-switches e.g. DS2405
- Replies: 3
- Views: 3815
Re: How to control 1-wire-switches e.g. DS2405
Could this be an alternative?
https://www.letscontrolit.com/wiki/index.php/PCF8574
https://www.letscontrolit.com/wiki/index.php/PCF8574
- 17 Feb 2018, 13:22
- Forum: ESP Easy: Projects / Applications
- Topic: Stepper support request; for curtain automation <€30
- Replies: 5
- Views: 9827
Re: Stepper support request; for curtain automation <€30
Hello Jazzle, Made some prototype progress, but not that fast. Every design change takes some 20-30 day of waiting for the china post... The Haydon AMETEK-LC1574-W linear stepper motor modified to rotational motor has no torque enough (I could have known!) So I moved over to his one: https://www.eba...
- 16 Feb 2018, 11:23
- Forum: ESP Easy: Hardware
- Topic: ESPEasy & BME680
- Replies: 9
- Views: 16014
Re: ESPEasy & BME680
Welcome For BME680 See: https://github.com/letscontrolit/ESPEasyPluginPlayground How to configure? You have to include https://github.com/letscontrolit/ESPEasyPluginPlayground/blob/master/_P119_BME680.ino and compile. How? See Wiki: https://www.letscontrolit.com/wiki/index.php/Main_Page SR501 Motion...
- 12 Feb 2018, 22:45
- Forum: ESP Easy: Projects / Applications
- Topic: Mistake with the rules?
- Replies: 6
- Views: 5224
Re: Mistake with the rules?
points towards an unstable situation ....Most of the time
do they have an external pull-up resistor (around 100KOhm)?the buttons are using pin 0 and 9
If not, enable the Internal PullUp for GPIO-0 and GPIO-9 in the Switch input Tasks
- 11 Feb 2018, 20:38
- Forum: ESP Easy: General Discussion
- Topic: rules delay to post vcc on deepsleep
- Replies: 36
- Views: 22124
Re: rules delay to post vcc on deepsleep
Does this helps?
Code: Select all
On bat#VCC do
Publish /%sysname%/status,%sysname%_Online
Publish /%sysname%/bat/VCC,%vcc%
endon
- 11 Feb 2018, 18:44
- Forum: ESP Easy: General Discussion
- Topic: rules delay to post vcc on deepsleep
- Replies: 36
- Views: 22124
Re: rules delay to post vcc on deepsleep
IIRCVCC#VCC=3.45
Rules don't like Taskname and Value name the same
- 11 Feb 2018, 00:57
- Forum: ESP Easy: General Discussion
- Topic: rules delay to post vcc on deepsleep
- Replies: 36
- Views: 22124
Re: rules delay to post vcc on deepsleep
Sorry, overlooked that
- 11 Feb 2018, 00:38
- Forum: ESP Easy: General Discussion
- Topic: rules delay to post vcc on deepsleep
- Replies: 36
- Views: 22124
Re: rules delay to post vcc on deepsleep
what do others do? Connect Vcc to the A0 analog port If you use Wemos D1 (has an internal 220K/100K divider): Connect Vcc to the A0 analog port via a 100KOhm resistor By adding a 100k , total resistance is 100k+220k+100k=420k. So if the Voltage of a fully loaded Cell would be 4.2 Volt, the ADC of t...
- 09 Feb 2018, 21:19
- Forum: ESP Easy: General Discussion
- Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
- Replies: 36
- Views: 28431
Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Space in the name of your node? ... Robs LCD in your last pic
RobsLCD as Node name and as Task name?
RobsLCD as Node name and as Task name?
- 09 Feb 2018, 20:05
- Forum: ESP Easy: General Discussion
- Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
- Replies: 36
- Views: 28431
Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Apple in your house? Apple uses 65501 for SAN.
In my Inter-ESPEasy set-up (GIT version: v2.0.0-dev12), the "slaved" Tasks on the display node are NOT-Enabled (=red cross)
In my Inter-ESPEasy set-up (GIT version: v2.0.0-dev12), the "slaved" Tasks on the display node are NOT-Enabled (=red cross)
- 09 Feb 2018, 18:19
- Forum: ESP Easy: Hardware
- Topic: Sonoff 4CH with ESPEasy
- Replies: 151
- Views: 171615
Re: Sonoff 4CH with ESPEasy
Good job!
- 09 Feb 2018, 18:16
- Forum: ESP Easy: General Discussion
- Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
- Replies: 36
- Views: 28431
Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Ohhh latest version of DST....
No experience with that yet (a TD-er contribution)
Advanced tab:
Global sync enabled?
A shared (=same) UDP port selected?
No experience with that yet (a TD-er contribution)
Advanced tab:
Global sync enabled?
A shared (=same) UDP port selected?
- 09 Feb 2018, 15:30
- Forum: ESP Easy: General Discussion
- Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
- Replies: 36
- Views: 28431
Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
IIRC,
time is important.
Check NTP on, on both.
Compare the time on both.
time is important.
Check NTP on, on both.
Compare the time on both.
- 06 Feb 2018, 20:18
- Forum: ESP Easy: General Discussion
- Topic: Wemos D1 with Wemos OLED shield and buttons.
- Replies: 10
- Views: 7745
Re: Wemos D1 with Wemos OLED shield and buttons.
If you look here https://wiki.wemos.cc/products:d1_mini_shields:oled_shield this document https://wiki.wemos.cc/_media/products:d1_mini_shields:sch_oled_v2.0.0.pdf Shows Key1 is default connected to D3 (GPIO0) Key2 is default connected to D4 (GPIO2) with the option to solder other connections (SJ3-S...
- 06 Feb 2018, 01:01
- Forum: ESP Easy: Hardware
- Topic: Sonoff 4CH with ESPEasy
- Replies: 151
- Views: 171615
Re: Sonoff 4CH with ESPEasy
I-PEX and PSF-A
Could this solve you problem?
https://nl.aliexpress.com/item/1set-2-4 ... 04091.html
Could this solve you problem?
https://nl.aliexpress.com/item/1set-2-4 ... 04091.html
- 28 Jan 2018, 23:04
- Forum: ESP Easy: Hardware
- Topic: Distance Sensors HC-SR04, JSN-SR04T and more
- Replies: 51
- Views: 57750
Re: Distance Sensors HC-SR04, JSN-SR04T and more
Sherdan and TD-er ... thanks for your acknowledge.
Opened issue: https://github.com/letscontrolit/ESPEasy/issues/782
Opened issue: https://github.com/letscontrolit/ESPEasy/issues/782
- 28 Jan 2018, 13:48
- Forum: ESP Easy: Hardware
- Topic: Distance Sensors HC-SR04, JSN-SR04T and more
- Replies: 51
- Views: 57750
Re: Distance Sensors HC-SR04, JSN-SR04T and more
It seems that this PLUGIN_13 from LisaM //####################################################################################################### //#################################### Plugin 013: Ultrasonic Sensors ################################### //################ models: HC-SR04, SRF05, SRF06...
- 23 Jan 2018, 00:11
- Forum: ESP Easy: Software
- Topic: Change PWM Frequency ?
- Replies: 38
- Views: 54462
Re: Change PWM Frequency ?
Vote here a thumb up:
- 21 Jan 2018, 09:56
- Forum: Experimental
- Topic: The Rig
- Replies: 33
- Views: 47864
- 20 Jan 2018, 20:34
- Forum: uPyEasy: General Discussion
- Topic: Blockly Events
- Replies: 21
- Views: 30884
Re: Blockly Events
Great Lisa !
Programming is soooo 1980
Programming is soooo 1980
- 20 Jan 2018, 13:36
- Forum: ESP Easy: Software
- Topic: Error with compiling of board WeMos d1 r2 mini
- Replies: 5
- Views: 7024
Re: Error with compiling of board WeMos d1 r2 mini
bin file is being created in the .pioenvs folder within the project folder
- 20 Jan 2018, 12:22
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 1883236
Re: Connecting a TM1637 4-Digit Display
@Papperone,
hope you can do it.
It would be a major break-trough: using PCFGPIO's as generic GPIO's.
(f.i. also for HC-SR04 distance measurement, IR Transmit etc.)
Thanks in advance !
hope you can do it.
It would be a major break-trough: using PCFGPIO's as generic GPIO's.
(f.i. also for HC-SR04 distance measurement, IR Transmit etc.)
Thanks in advance !
- 19 Jan 2018, 23:59
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 1883236
Re: Connecting a TM1637 4-Digit Display
@Papperone,
thanks for this plug-in.
Is it possible to combine this plug-in with a PCF8574 I/O expander ?
A quick test of the mega release ESPEasy_mega-20180119 showed only the regular GPIO's and not the PCFGPIO's from PCF8574.
Thanks for your response.
Domosapiens
thanks for this plug-in.
Is it possible to combine this plug-in with a PCF8574 I/O expander ?
A quick test of the mega release ESPEasy_mega-20180119 showed only the regular GPIO's and not the PCFGPIO's from PCF8574.
Thanks for your response.
Domosapiens
- 19 Jan 2018, 19:48
- Forum: Experimental
- Topic: The Rig
- Replies: 33
- Views: 47864
Re: The Rig
I like to reward the team for all their work, but ..
Sorry, this is too complicated and too much waste.
- PayPal redirection does not work
- 21% VAT goes to ???
Please open just a PayPal account for gifts.
Sorry, this is too complicated and too much waste.
- PayPal redirection does not work
- 21% VAT goes to ???
Please open just a PayPal account for gifts.
- 11 Jan 2018, 17:07
- Forum: ESP Easy: Projects / Applications
- Topic: MQTTImport and use of formula
- Replies: 4
- Views: 3986
Re: MQTTImport and use of formula
Vaguely remember this ... using (...)
Code: Select all
on DimmerImport#Level do
PWM,14,([DimmerImport#Level]*1024/100),1250
endon
- 11 Jan 2018, 10:45
- Forum: ESP Easy: General Discussion
- Topic: Number of Devices / Tasks limited to 12 ?
- Replies: 36
- Views: 30975
Re: Number of Devices / Tasks limited to 12 ?
See hexemeister's suggestion to prevent data structure overlapping...Change TASKS_MAX in ESPEasy.ino and recompile
https://github.com/letscontrolit/ESPEas ... -344511468
- 05 Jan 2018, 00:14
- Forum: ESP Easy: Projects / Applications
- Topic: Building a WiFi weatherstation
- Replies: 2
- Views: 3346
Re: Building a WiFi weatherstation
Without a screenshot, it is just an assumption,
But I assume you swapped the values.
First field is what you measure, second field is what it means.
The sign in the middle means "equals"
So your values should be:
0.375 ... 0
1.000 ... 15
Hope this helps
Domosapiens
But I assume you swapped the values.
First field is what you measure, second field is what it means.
The sign in the middle means "equals"
So your values should be:
0.375 ... 0
1.000 ... 15
Hope this helps
Domosapiens
- 04 Jan 2018, 21:07
- Forum: ESP Easy: Software
- Topic: Esp easy update temperature to domoticz generate a reboot
- Replies: 6
- Views: 5727
Re: Esp easy update temperature to domoticz generate a reboot
Tixav, you could try the second controller position for Domoticz and leave the first one empty. I had in the past some problems with out of bound memory write to the data area of the first controller. Just my 2 cents, Domosapiens Note: If this helps, it could be related to how memory allocation for ...
- 03 Jan 2018, 12:04
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy v2.0.0-dev13
- Replies: 39
- Views: 41139
Re: ESPEasy v2.0.0-dev13
Happy New Year and ..
Congrats to Edwin and ESP Easy contributors
Congrats to Edwin and ESP Easy contributors