Just playing around with the best way of setting dummy variables via MQTT. I find that dummy devices can only send to controller in interval from 1 sec and up. It cannot be set to 0 like normal devices.
Executing "TaskValueSetAndRun" via MQTT doesn't seem to push an immediate controller update of the new value. How to do that then?
Alternative is an MQTT Import, but it feels like crossing the river for water
Dummy variables / send to controller
Moderators: grovkillen, Stuntteam, TD-er
Re: Dummy variables / send to controller
TaskValueSetAndRun will immediately push the value to the connected controller's send queue
How quickly data gets flushed there depends on the controller queue settings.
See: https://espeasy.readthedocs.io/en/lates ... parameters
You can also call publish from the rules, which also append nicely to the controller queue.
How quickly data gets flushed there depends on the controller queue settings.
See: https://espeasy.readthedocs.io/en/lates ... parameters
You can also call publish from the rules, which also append nicely to the controller queue.
Who is online
Users browsing this forum: No registered users and 4 guests