I use ESP Easy mega-20180513 on NodeMCU V2 Amica with a DHT22 sensor.
Works well.
I have 1 wifi network with SSID "test".
There are 3 overlapping WiFi access points (AP) in the network.
All AP have SSID "test" with same Password.
Each AP has its own BSSID = Mac address.
JSON Printout:
Code: Select all
WiFi
Host Name "ESP Easy-0"
IP config "DHCP"
IP "192.168.0.60"
Subnet Mask "255.255.255.0"
Gateway IP "192.168.0.254"
MAC address "5C: CF: 7F: 76: F8: 3A"
DNS 1 "192.168.0.254"
DNS 2 "0.0.0.0"
SSID "Test"
BSSID "EC: 08: 6B: 50: 28: 1E"
channel 11
If this is not available, ESP Easy will not connect to the other APs.
How can I set ESP Easy to connect to any AP with SSID "test" regardless of the BSSID?
Greeting Bracew
Translated by Google Translator from German to English