Search found 118 matches

by beic
26 Jun 2020, 00:28
Forum: ESP Easy: General Discussion
Topic: PN532 with NodeMCU 3 not working
Replies: 68
Views: 33308

Re: PN532 with NodeMCU 3 not working

i build a new nfc-reader with espeasy on a gizwit module. it lacks 3.3V, but i found it on a pin of the LDR. it seems that both pcb's run alone from usb-power. did not test if i still need the reset-line, so left it in at first. Hey tozett, I know it's an old post, but did you ever try to use PN532...
by beic
16 Mar 2018, 18:45
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Yes, I tested on two wemos 1d mini. The first one is working in a recuperator in my home. After uploading the patch. Good temperature, bad reading humidity (jumps ~ 40% to ~ 95%). I exchanged wemos 1d for a second and then everything returned to normal. Curiosity. I thought I had a damaged first we...
by beic
16 Mar 2018, 17:55
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 16 Mar 2018, 17:41 Great. I am glad that this problem has been solved.
Yeah, so, did you made any test? All working as expected now?!
by beic
16 Mar 2018, 15:57
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 14 Mar 2018, 20:17 I check on "ESP_Easy_masy-20180314_dev_ESP8266_4096" a few days and I will give a report.
There is a new firmware released with merged plugin!

Regards
by beic
14 Mar 2018, 20:22
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 14 Mar 2018, 20:17 Thank you, it's much better. Now it reads two sensors separately. I check on "ESP_Easy_masy-20180314_dev_ESP8266_4096" a few days and I will give a report.
Regards
Appreciated ;)
by beic
14 Mar 2018, 13:22
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 12 Mar 2018, 18:38 Hello, do you have time to see it?
PR was made on the GitHub, but not Merged yet, see https://github.com/letscontrolit/ESPEasy/pull/1081, majority of duplex Plugins have a same issue!

Regards

p.s. Please leave you post test feedback about current changes
by beic
05 Mar 2018, 15:31
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 05 Mar 2018, 14:36 see my photos https://photos.app.goo.gl/mMjx1g0ZylR24dzX2
Gonna see what is happening there...
by beic
05 Mar 2018, 14:05
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 05 Mar 2018, 14:01 Does not have. I use the latest version. It does not work with two SHT30 on wemos d1 mini.
Yes, because I made it, so, did you select the correct addresses like for one 0x44 and for the second one 0x45?, also don't forget to short juper on one of the shield board.

Regards
by beic
05 Mar 2018, 13:50
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

Tbomek wrote: 05 Mar 2018, 13:19 Hello. I need to read two sht30 on one wemos d1 mini. Does anyone have a plugin that can do it? The current plugin reads only one sht30 address at a time.
It's already included, see on GitHub:
https://github.com/letscontrolit/ESPEas ... _SHT3x.ino

Regards
by beic
25 Aug 2017, 19:03
Forum: ESP Easy: Hardware
Topic: More support for i2c modules/sensors [UPDATED 25.09.2016]
Replies: 14
Views: 8156

Re: More support for i2c modules/sensors [UPDATED 25.09.2016]

LisaM wrote: 25 Aug 2017, 13:18
beic wrote: 25 Aug 2017, 08:28
toffel969 wrote: 25 Aug 2017, 07:28 Chill people 8-) I am sure you both contribute to best you can. It's not a competition... not everyone has same abilities/time to spare/energy, everyone to their abilities.
Yes, but, unfortunately Lisa can't understand that! ;)

Regards
:mrgreen:
Kappa :D
by beic
25 Aug 2017, 08:28
Forum: ESP Easy: Hardware
Topic: More support for i2c modules/sensors [UPDATED 25.09.2016]
Replies: 14
Views: 8156

Re: More support for i2c modules/sensors [UPDATED 25.09.2016]

toffel969 wrote: 25 Aug 2017, 07:28 Chill people 8-) I am sure you both contribute to best you can. It's not a competition... not everyone has same abilities/time to spare/energy, everyone to their abilities.
Yes, but, unfortunately Lisa can't understand that! ;)

Regards
by beic
24 Aug 2017, 22:29
Forum: ESP Easy: Hardware
Topic: More support for i2c modules/sensors [UPDATED 25.09.2016]
Replies: 14
Views: 8156

Re: More support for i2c modules/sensors [UPDATED 25.09.2016]

LisaM wrote: 24 Aug 2017, 19:34 Actually i've rebuild P013 to include new sonic sensors, helped test HLW8012, ArduinoEasy.
Really?!? I built a few to, like SHT30 and LM75A.
by beic
24 Aug 2017, 19:21
Forum: ESP Easy: Hardware
Topic: More support for i2c modules/sensors [UPDATED 25.09.2016]
Replies: 14
Views: 8156

Re: More support for i2c modules/sensors [UPDATED 25.09.2016]

LisaM wrote: 24 Aug 2017, 14:02 It's always easy to ask others to do your work...
Yeah, like you, using the whole project what others built...

Kind regards
by beic
10 May 2017, 19:54
Forum: ESP Easy: Hardware
Topic: AM2320 on I2C bus
Replies: 7
Views: 3728

Re: AM2320 on I2C bus

what about connection? I don't think DHT22 and AM2320 are pin compatible... do you have any info about it ? Have a look at the datasheet: https://akizukidenshi.com/download/ds/aosong/AM2320.pdf On page 3 you'll find the pinout of the AM2320. On page 21 is a schematic for using it as a one-wire devi...
by beic
10 May 2017, 16:39
Forum: ESP Easy: Hardware
Topic: AM2320 on I2C bus
Replies: 7
Views: 3728

Re: AM2320 on I2C bus

papperone wrote: 10 May 2017, 16:23 hi, will you mind to share the plugin?
Already included to the default build by krikk, anyway you can use it with the DHT22 lib too as a single-bus!

Regards
by beic
01 May 2017, 17:41
Forum: ESP Easy: Software
Topic: 433MHz NEXA protocol transmitter plugin
Replies: 14
Views: 14215

Re: 433MHz NEXA protocol transmitter plugin

kniazio wrote: 01 May 2017, 11:10 this device/module, it's working with RCSwitch plugin
Thank you! ;)
by beic
27 Apr 2017, 11:36
Forum: ESP Easy: Software
Topic: 433MHz NEXA protocol transmitter plugin
Replies: 14
Views: 14215

Re: 433MHz NEXA protocol transmitter plugin

tozett wrote: 27 Apr 2017, 08:38 link broken, this worked: https://github.com/letscontrolit/ESPEas ... 2_RFTX.ino
I was asking about this device/module, it's working with NEXA plugin or not?

Image

Anyone tested it?

Kind regards,
Viktor
by beic
26 Apr 2017, 00:18
Forum: ESP Easy: Software
Topic: 433MHz NEXA protocol transmitter plugin
Replies: 14
Views: 14215

Re: 433MHz NEXA protocol transmitter plugin

Since I also have a couple of those wireless switch modules installed, I'll post my results once I've tried them with this plugin. See e.g. "1 Ch Wireless Relay RF Remote Control Switch DC 12V Heterodyne Receiver 433MHz" Currently available for US$ 1.99 and free shipping to europe http://s.click.al...
by beic
23 Apr 2017, 18:31
Forum: ESP Easy: Hardware
Topic: Sensirion SHT30 supported?
Replies: 30
Views: 13945

Re: Sensirion SHT30 supported?

I have rewrite the Plugin for my personal usage, and it's working now on older releases/versions like R147 too!

Cheers
by beic
23 Apr 2017, 18:28
Forum: ESP Easy: Hardware
Topic: AM2320 on I2C bus
Replies: 7
Views: 3728

Re: AM2320 on I2C bus

Anyway, I wrote my own Plugin for it, regarding the I2C bus.

Also, the ESPEasy will not detect the sensor on the I2C bus by "I2C Scanner" for some reason, but the sensor is working on the 0x5C address.

Regards
by beic
23 Apr 2017, 18:24
Forum: ESP Easy: Hardware
Topic: DHT22 Problem
Replies: 25
Views: 19706

Re: DHT22 Problem

I am now trying to calibrate. 24hour with salt in a jar - it should be around 75%. Then I try to put in a jar filled with water - it should be around 100%. SI7021 seem to be accurate out of the box. BMP280 - is measuring +1C out of the box BMP180 - temp OK, pressure little bit different than BMP280...
by beic
21 Apr 2017, 14:56
Forum: ESP Easy: Hardware
Topic: AM2320 on I2C bus
Replies: 7
Views: 3728

AM2320 on I2C bus

Hi there,

Anyone has a AM2320 sensor setup on the I2C bus?

I tried with pullup resistors, but the ESPEasy doesn't report any new I2C address found.

Any help, please!

Kind regards,
Viktor

p.s. The sensor is working with one wire setup with DHT22 device selected.
by beic
18 Apr 2017, 22:11
Forum: ESP Easy: Software
Topic: Event plugin can't compile
Replies: 2
Views: 1483

Re: Event plugin can't compile

I doubt if the event plugin has any use since we have rules engine now. But to make it compatible with a later ESP Easy framework, you could patch line 522 in the plugin file: change this ExecuteCommand(command); into ExecuteCommand(0,command); should be safe... Hey Martinus, Long time no see! ;) Y...
by beic
16 Apr 2017, 00:10
Forum: ESP Easy: Software
Topic: MFRC522
Replies: 1
Views: 1168

Re: MFRC522

kniazio wrote: 15 Apr 2017, 15:22 Can someone already have done with this plugin for Easyesp?
https://github.com/Jorgen-VikingGod/ESP8266-MFRC522
I already requested at https://github.com/letscontrolit/ESPEasy/issues/198

Regards
by beic
16 Apr 2017, 00:08
Forum: ESP Easy: Software
Topic: Need a beginner guide to write a plugin
Replies: 2
Views: 1451

Re: Need a beginner guide to write a plugin

get your development environment: https://www.letscontrolit.com/wiki/index.php/ESPEasy#Source_code_development I know that already. copy an existing plugin and adapt it to your sensor: e.g this one https://github.com/letscontrolit/ESPEasy/blob/mega/src/_P014_SI7021.ino <-- another temperatur sensor...
by beic
16 Apr 2017, 00:04
Forum: ESP Easy: Software
Topic: Event plugin can't compile
Replies: 2
Views: 1483

Event plugin can't compile

Hi there, I'm trying to compile Event plugin from ESPEasyPluginPlayground https://github.com/dzikus/ESPEasyPluginPlayground/blob/master/_P103_Event.ino But, I got an compile error saying: _P103_Event.ino: In function 'void Plugin_103_Action(byte, byte, int, int, byte)': _P103_Event:522: error: inval...
by beic
15 Apr 2017, 21:37
Forum: ESP Easy: Software
Topic: Need a beginner guide to write a plugin
Replies: 2
Views: 1451

Need a beginner guide to write a plugin

Hi there,

I need a beginner guide to write a simple I2C plugin for the LM75A sensor.

https://github.com/QuentinCG/Arduino-LM ... ster/LM75A

Anyone has some experience to help me out?

Thank you! ;)

Kind regards,
Viktor
by beic
02 Apr 2017, 19:11
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

ToniA wrote: 02 Apr 2017, 19:09 Let's hope so, but I need a lot of help from you :)
It's just awesome Toni, just so, awesome! 8-)

I will do it all tonight!!! :twisted:
by beic
02 Apr 2017, 19:06
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

So, if I give you all the RAW code with description then you can make a library for me/us (community)?!

Kind regards,
Viktor
by beic
02 Apr 2017, 16:15
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

So, if I decode my remote control commands like (On, Off, etc...) with that https://github.com/ToniA/Raw-IR-decoder-for-Arduino, than you can make a library for Vivax unit too?
by beic
02 Apr 2017, 13:49
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

I've used 940 nm leds. The range is not very good, I think you could get a few meters with 100 ohms. The resistor value does not really matter much, just use something. Thanks Toni for that! ;) But, do you have any support (any thoughts) maybe for my Vivax Cool ACP-12CH35AEL (12000 / 12000 BTU) ? U...
by beic
31 Mar 2017, 11:37
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

OK, done :) So the _P115 on the plugin playground now works against HeatpumpIR library version 1.0.6. Ohhh, ToniA my friend, it's compiling now like a charm! 8-) Just one question,... I'm using WeMos D1 mini (3.3v), so,... I need to know the resistor value and what type of IR Transmitter Diode to u...
by beic
30 Mar 2017, 22:11
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

ToniA wrote: 30 Mar 2017, 21:13 Oh yes, I've done further development on the HeatpumpIR library, without updating the plugin. If you don't have a Samsung or Gree, just comment out the code where it adds instances of those into the array of supported models.
But, can you fix it for me, please ToniA! ;)
by beic
30 Mar 2017, 21:08
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy to control air conditioners / heat pumps
Replies: 159
Views: 81537

Re: ESPEasy to control air conditioners / heat pumps

Hi there, I'm getting error while compiling it! Any suggestions? In file included from _P115_HeatpumpIR.ino:40:0: C:\Documents and Settings\Beic\My Documents\Arduino\libraries\arduino-heatpumpir/SamsungHeatpumpIR.h:54:5: error: 'SamsungHeatpumpIR::SamsungHeatpumpIR()' is protected SamsungHeatpumpIR(...
by beic
07 Mar 2017, 23:37
Forum: ESP Easy: General Discussion
Topic: Feature Request collection/list
Replies: 197
Views: 102453

Re: Feature Request collection/list

#1 - Please obfuscate ALL passwords on the config tab - not only the WiFiKey, but also the admin password and the "WPA AP mode key" #2 - Make it possible to change the admin password from the console command line. #3 - CONTINUE MAKING THE MOST INTERESTING CONFIG INTERFACES FOR THE ESP8266 !!! :-) T...
by beic
07 Mar 2017, 00:28
Forum: ESP Easy: Hardware
Topic: Aosong AM2315 i2c Digital Temperature and Humidity External Sensor Support
Replies: 2
Views: 2039

Re: Aosong AM2315 i2c Digital Temperature and Humidity External Sensor Support

bertrand wrote: 14 Nov 2016, 15:36 I have a couple of AM2322. I didn't had time to play with them yet, but they also have the one wire compatibility mode... connect the grey (SCL) to ground, and it will act as a AM2302 (DHT22).
Thanks! ;)
by beic
03 Feb 2017, 08:02
Forum: Staff Announcements forum
Topic: ESP Easy development status
Replies: 143
Views: 76360

Re: ESP Easy development status

And that would be quite right, but not our business, mind you I'm not mind at all, but little bit sad... :( The complete code is on github, anybody who want to continue with the project is free to fork it Unfortunately, after 1 month past, there is no one to continue his work/steps, and I'm afraid ...
by beic
03 Feb 2017, 07:57
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

paxi wrote:Update to the post above:
this unit still hangs sometimes while the other 2 Sonoff's run solid.
Did you consider maybe that one device is hardware damaged as new from factory?

Kind regards,
Viktor
by beic
02 Feb 2017, 16:19
Forum: Staff Announcements forum
Topic: ESP Easy development status
Replies: 143
Views: 76360

Re: ESP Easy development status

I think our friend got a lifetime offer in the same branch! ;)

But that is the life path I think!

Kind regards,
Viktor
by beic
27 Jan 2017, 07:57
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 148466

Re: ESP Easy Releases

Jan Jansen wrote:Thanks Viktor, it works as desired!

Jan
Anytime! ;)
by beic
26 Jan 2017, 20:48
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 148466

Re: ESP Easy Releases

Today, I took my 1st Wemos d1 mini (ESPeasy, SI7021 + OLED 1306) in use. I connected the set with Domoticz, so far everything ok. I'd also like the current time on the display. I did > press edit Display - OLED SSD1306 > filled line 8 > Tijd:%systime% > display shows Tijd: 0:00. What's wrong? You m...
by beic
24 Dec 2016, 20:24
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

These two I2C board are not working together, no matter what you will do! PCF8574 I/O Expansion Board (chip PCF8574T) http://i01.i.aliimg.com/img/pb/272/951/526/526951272_790.jpg and I2C LCD 1602 Inerface board (chip PCF8574T) https://www.pcboard.ca/image/cache/catalog/products/lcd-products/iic-i2c-...
by beic
29 Nov 2016, 18:27
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

Didn't found any issues yet, using more ESP units at the same time... - Stable webgui/ICMP ping: YES / No packet loss - ESP Hardware: ESP-01 and ESP-01S Barebone (black version = 1Mb) - Firmware used: 146 - Stock binary image or custom: Custom compiled from GitHub (only iternal VCC customisation) - ...
by beic
21 Nov 2016, 12:08
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

frank wrote:The question i have is after rebooting the unit automaticly goes back to the update screen. Is it possible to make a go back to the main screen button in the update screen? Or make it go back to the main screen after reboot
+1 thumbs for that! ;)
by beic
20 Nov 2016, 17:01
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

Martinus wrote: Anyone else who suffers from bug #07? Starting to look like an erroneous bug report to me...
Did not get any faulty reading trough kWH meter so far...

And can you please look at my post please and answer me?!

viewtopic.php?f=6&t=2107&start=80#p10959
by beic
17 Nov 2016, 21:59
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 53387

Re: Measure VCC

papperone wrote: Not sure if I understand why BME can show 3 values and INA219 cannot...
Yes, I asked that same question! ;)
by beic
17 Nov 2016, 20:28
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 53387

Re: Measure VCC

It was designed for Domoticz that can handle only single value custom sensors. But you can run several tasks on the same module and select a different reading on each task. It would be really nice to see all 3 values in the ESPEasy Web GUI and to send desired value to Domoticz. Use dummy device. Se...
by beic
14 Nov 2016, 22:51
Forum: ESP Easy: General Discussion
Topic: Feature Request collection/list
Replies: 197
Views: 102453

Re: Feature Request collection/list

Feature Request; Day/Time Dummy (or Variable) Hi, I will appreciate the addition of a Day/Time Dummy device. I would like to send a Day/Time for the rules at a specific time via MQTT preferably. E.g. On Clock#Time=[Dummy1#DayTime1] do // Irrigation starts at the defined time, e.g. "Mon,08:00" gpio,...
by beic
14 Nov 2016, 15:27
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

Hi Martinus, Regarding the the i2c scanner: 1). under 0x3F address please add after PCF8574A the LCD 16x2 Display module like LCD ! 2). under 0x40 address please add after SI7021 the HTU21D sensor too, it's working with the SI7021 plugin ( tested )! https://s13.postimg.org/8ilr6mczb/espeasy_i2c_scan...
by beic
13 Nov 2016, 23:36
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 62028

Re: ESP Easy next stable... (release candidates)

About Bug #6: I have a similiar behavior with the name: When removing a device the name remains in the device list. I moved a GP2Y dust sensor from task 3 to task 1, setting the device field of task 3 to empty. This was the result: Task name remains.jpg I edited task 3 again, setting it to GP2y aga...