Well it was just a guess. must be escapable somehow.

when sending from a script via netcat to espeasy i use \n (backslash n) for new line \r return character "\ " space and such.

Any updates to this?
A plugin for ESPEasy would be awesome

Awesome! Donated a little bit for all the hard work with the weather sensors.

Just wanted to say that these sensors now work absolutely fine in test version of firmware (rfl4604_test)

Tested with 9 sensors. read by domoticz

What a well behaved sensor

Now after some code magic in domoticz by stuntteam it should also handle different weather sensor packets. Big up!

If you get nothing in debug mode on rflink it's probably frequency coded and not supported by RfLink(actually the receiver module)

Double check so it's only one packet type.

Mine acurite 5in1 sends 2 different packages and domoticz for example don't like that.

Tests with new firmware looks promising. Details in mail.

Testing with 9 sensors now on test version. finds them all.

And timestamps ☺

Hehe ok. Sorry for bombarding you with data. Used to work as a software tester. This is how the data looks when used as an fine offset in domoticz http://i.imgur.com/AQMmCX8.png temp should be ~10C and humidity ~60% If you want me to run more test on the sensor/other test versions just give me a sho...

Captured some more debug data: put meter in freezer -10 at least Sensor output in domoticz When found/read as alectro v3 *Temp reads fine + and - *Humidity is flunked, reads to low and jumps around When found/read as Fine Offset *Temp is flunked - reads ~40C to high, + is ok but i've seen wierd stuf...

I think i found the problem. Seem like the sensor sometimes are read as an alectrov3 and sometimes an fine offset. Log from RfLink 20;07;AlectoV3;ID=00ea;TEMP=8036;HUM=3c;BAT=OK; 20;09;AlectoV3;ID=00ea;TEMP=8005;HUM=46;BAT=OK; 20;11;FineOffset;ID=00ea;TEMP=01a2;HUM=78; 20;15;FineOffset;ID=00ea;TEMP=...

After some testing i see that the humidity value fluctuates quite much. And the temp somtimes. Humidity in measured room should be around 60%(accoding to dehumidifier) sesor reading shows a bit under that but hard to tell when it fluctuates whats an accurate reading. Tested temp in the freezer. Show...

Tested humidity. after breathing on it it shows 48% and 28,9C

Now put in a location where i have another humidity reader to compare.

How do you determine the battery level/OK btw?

That was quick! Just tested and got this in the log now 20;07;AlectoV3;ID=0056;TEMP=00dc;HUM=28;BAT=OK; Took out the batteries from sensor and put them back and the sensor now looks like 20;40;AlectoV3;ID=00ea;TEMP=00f3;HUM=2a;BAT=OK; So it changes adress when restarted. nothing unsuspected. Temp in...

Just got this from the seller. Awesome guy!

Tried to sort out some log for the sensor after i put it in the cooler 24C->10C. humidity probably changes too Sorted: 20;1C;DEBUG;Pulses=94;Pulses(uSec)=480,870,390,870,390,870,390,870,390,870,390,870,390,870,1380,870,390,870,1380,870,1380,870,1380,870,390,870,1350,870,390,870,1380,870,390,870,390,...

If there is anything i can help with please tell.
More logs with device os so.

Tried with a weather sensor . I Can se debug log for it but no decoding of data. http://i.imgur.com/idBqrMN.jpg From http://www.ebay.co.uk/itm/261788376051?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Package for sensor is marked WH1285TX Sensor marked Imagitronix WH5. (likley a Fi...