Search found 241 matches
- 04 Sep 2018, 11:39
- Forum: ESP Easy: Software
- Topic: Can I use GPIO 5 on my Sonoff Basic?
- Replies: 4
- Views: 5023
Re: Can I use GPIO 5 on my Sonoff Basic?
No. The Sonoffs have only GPIO 1,3 and 14 available for 'normal' use. If you don't need the LED, you can kick it and you can use GPIO 13 (inversed!)
- 20 Aug 2018, 20:14
- Forum: ESP Easy: General Discussion
- Topic: Problems to compile espeasy
- Replies: 10
- Views: 11290
Re: Problems to compile espeasy
That's not so easy. For the SDMs you need first to know what kind of communication you want to use: hard- or software-serial. So a different kind of firmware is compiled! HW serial seems also to be fixed to GPIO-1 and -3 and baud rate of 9600. But HW serial makes a lot less problems, as I can read s...
- 20 Aug 2018, 15:21
- Forum: ESP Easy: General Discussion
- Topic: Problems to compile espeasy
- Replies: 10
- Views: 11290
Re: Problems to compile espeasy
@MaikelK: Make a "SDM" folder in the libraries folder and copy all stuff in, except the INO-file (stays in src folder). That works for me...
- 25 Apr 2018, 20:40
- Forum: ESP Easy: Software
- Topic: sysload generic device is not show the right sysload
- Replies: 1
- Views: 2181
Re: sysload generic device is not show the right sysload
Not here. Shows in both the same value! No issue.
Main screen:
Current load: 5% (LC=11470)
Sysinfo:
System Info Test Test: 5
Main screen:
Current load: 5% (LC=11470)
Sysinfo:
System Info Test Test: 5
- 20 Apr 2018, 17:16
- Forum: ESP Easy: Hardware
- Topic: Wifi Status Led (Solved)
- Replies: 12
- Views: 11162
Re: Wifi Status Led
If one line (SDA or SCL) from I2C uses GPIO2 (if this is LED), than change it to another free one in the hardware menu
- 20 Apr 2018, 16:32
- Forum: ESP Easy: Hardware
- Topic: Wifi Status Led (Solved)
- Replies: 12
- Views: 11162
Re: Wifi Status Led
Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED...
- 20 Apr 2018, 15:53
- Forum: ESP Easy: Hardware
- Topic: Paper-mail with email project
- Replies: 17
- Views: 10545
Re: Paper-mail with email project
No problems with that. I use a reed switch for that and set MQTT delay to 0. Works over a year now like a charm...
- 20 Apr 2018, 15:44
- Forum: ESP Easy: Hardware
- Topic: Wifi Status Led (Solved)
- Replies: 12
- Views: 11162
Re: Wifi Status Led
Wifi Status LED
GPIO → - None -
GPIO → - None -
- 06 Apr 2018, 19:59
- Forum: ESP Easy: General Discussion
- Topic: Create backup of the current ESP8266 flash
- Replies: 7
- Views: 14682
Re: Create backup of the current ESP8266 flash
For what should it be good for What you backup is what you flashed! And the config files are saved under Tools->Flash. All done.
- 21 Mar 2018, 00:11
- Forum: ESP Easy: General Discussion
- Topic: Boot reason in rule
- Replies: 3
- Views: 3907
Re: Boot reason in rule
A 5 min job to program....
- 19 Mar 2018, 15:28
- Forum: ESP Easy: Software
- Topic: Button as an Button
- Replies: 4
- Views: 5125
Re: Button as an Button
Why a 10k resistor to ground? Check 'Internal PullUp' for the switch and switch GND. Or must you switch Vcc?
- 12 Mar 2018, 19:14
- Forum: ESP Easy: General Discussion
- Topic: Notepad++ Rules syntax highlight
- Replies: 23
- Views: 13035
Re: Notepad++ Rules syntax highlight
Have you tried to rename the file to 'ESP_Easy_rules.xml'? After import you have the new option like this...
- 04 Mar 2018, 20:13
- Forum: ESP Easy: Software
- Topic: Store Espeasy State
- Replies: 9
- Views: 7934
Re: Store Espeasy State
With MQTT it should not be a problem. For me this works and the ESP restores the last state after reboot.
- 04 Mar 2018, 17:00
- Forum: Experimental
- Topic: 2x Factory Reset button to web interface ?
- Replies: 5
- Views: 13437
Re: 2x Factory Reset button to web interface ?
I'm compiling my own ESPeasy version and so didn't had that problem....
- 03 Mar 2018, 13:31
- Forum: ESP Easy: Hardware
- Topic: Any definitive wiring guide for an ESP-01 1M ?
- Replies: 17
- Views: 20899
Re: Any definitive wiring guide for an ESP-01 1M ?
See step 3 on this page. It shows a min. HW config....
http://www.instructables.com/id/Getting ... 66-ESP-12/
http://www.instructables.com/id/Getting ... 66-ESP-12/
- 03 Mar 2018, 12:04
- Forum: ESP Easy: Hardware
- Topic: Any definitive wiring guide for an ESP-01 1M ?
- Replies: 17
- Views: 20899
Re: Any definitive wiring guide for an ESP-01 1M ?
GPIO2 = UART Tx during flash programming; GPIO2
CH_PD and RST needs to pulled high for normal operation of the ESP.
CH_PD and RST needs to pulled high for normal operation of the ESP.
- 03 Mar 2018, 11:41
- Forum: Experimental
- Topic: 2x Factory Reset button to web interface ?
- Replies: 5
- Views: 13437
Re: 2x Factory Reset button to web interface ?
It's a bug in the source code. See here.... TXBuffer += F("<TR><TD HEIGHT=\"30\">"); addButton(TXBuffer.buf, F("/?cmd=reset"), F("Factory Reset")); TXBuffer += F("<TD>"); TXBuffer += F("Erase all settings files"); TXBuffer += F("<TR><T...
- 27 Feb 2018, 17:42
- Forum: ESP Easy: Software
- Topic: Problem with compiling ESPEasy_v2.0-20180227 and arduino-1.8.5
- Replies: 4
- Views: 4515
Re: Problem with compiling ESPEasy_v2.0-20180227 and arduino-1.8.5
I would 1st delete all devices I don't need/use from the src folder (.ino files). Restart Arduino IDE and look if the warnings are less/gone now....
2nd: check for updates of the libraries.
2nd: check for updates of the libraries.
- 26 Feb 2018, 16:06
- Forum: ESP Easy: Software
- Topic: rules on boot
- Replies: 3
- Views: 5229
Re: rules on boot
You can start events on boot-up with "on system#boot do ..... endon" in the rules....
See here
https://www.letscontrolit.com/wiki/inde ... rial_Rules
See here
https://www.letscontrolit.com/wiki/inde ... rial_Rules
- 26 Feb 2018, 15:58
- Forum: ESP Easy: General Discussion
- Topic: Can't connect to ESP unit with static IP
- Replies: 19
- Views: 16361
Re: Can't connect to ESP unit with static IP
That has never worked (or is it a typo?): 192.168.2.8/control?cmd=GPIO.5.1
. is not a valid delimiter. Only <space> or , is allowed. So try 192.168.2.8/control?cmd=GPIO,5,1 like in your link.
. is not a valid delimiter. Only <space> or , is allowed. So try 192.168.2.8/control?cmd=GPIO,5,1 like in your link.
- 21 Feb 2018, 20:27
- Forum: ESP Easy: Software
- Topic: How set values for Dummy Switch with mqtt?
- Replies: 13
- Views: 10959
Re: How set values for Dummy Switch with mqtt?
Due to a limited life time of the flash chips, we reduce all write cycles to a minimum.
- 21 Feb 2018, 13:45
- Forum: ESP Easy: General Discussion
- Topic: How flexible are if statements w/ %eventvalue%v?
- Replies: 9
- Views: 7297
Re: How flexible are if statements w/ %eventvalue%v?
You can try this:
on %eventvalue% < [T1#A] do //Check 1st if lower
if %eventvalue% > [T1#A] //Check 2nd if higher, so we also have a <> comparison
bla, bla....
else
more bla, bla....
endif
endon
on %eventvalue% < [T1#A] do //Check 1st if lower
if %eventvalue% > [T1#A] //Check 2nd if higher, so we also have a <> comparison
bla, bla....
else
more bla, bla....
endif
endon
- 20 Feb 2018, 21:22
- Forum: ESP Easy: General Discussion
- Topic: How flexible are if statements w/ %eventvalue%v?
- Replies: 9
- Views: 7297
Re: How flexible are if statements w/ %eventvalue%v?
Only one operator is allowed. <> is not allowed. See source code... switch (compare) { case '>': if (Value1 > Value2) match = true; break; case '<': if (Value1 < Value2) match = true; break; case '=': if (Value1 == Value2) match = true; break;
- 17 Feb 2018, 21:25
- Forum: ESP Easy: Hardware
- Topic: Sonoff basic with wall switch
- Replies: 23
- Views: 21277
Re: Sonoff basic with wall switch
Sorry, but I see no image of your config!?
- 17 Feb 2018, 12:05
- Forum: ESP Easy: Hardware
- Topic: Sonoff basic with wall switch
- Replies: 23
- Views: 21277
Re: Sonoff basic with wall switch
Only 1 device is needed in ESPeasy (SW01) and a controller setup for Domoticz (HTTP or MQTT). Then you can use this rule...
on SW01#Switch do
if [SW01#Switch]=0
gpio,12,0
gpio,13,1
else
gpio,12,1
gpio,13,0
endif
endon
on SW01#Switch do
if [SW01#Switch]=0
gpio,12,0
gpio,13,1
else
gpio,12,1
gpio,13,0
endif
endon
- 15 Feb 2018, 17:56
- Forum: ESP Easy: Projects / Applications
- Topic: Warning: Bug in OLED Framed plugin
- Replies: 11
- Views: 10677
Re: Warning: Bug in OLED Framed plugin
Depends on the the log level you have set. When you realised your project with the use of the dummy plugin, this does not write to flash (keeps data only in memory).
- 15 Feb 2018, 10:45
- Forum: ESP Easy: Projects / Applications
- Topic: Warning: Bug in OLED Framed plugin
- Replies: 11
- Views: 10677
Re: Warning: Bug in OLED Framed plugin
Flash Writes (daily/boot): 0 / 4 means flash write of the FIRMWARE, not the data of any plug-ins!
- 11 Feb 2018, 17:45
- Forum: ESP Easy: Projects / Applications
- Topic: SSD1306 not framed
- Replies: 4
- Views: 4084
- 11 Feb 2018, 17:09
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 54838
Re: ESP-32 plans for ESPEasy (?)
@Martinus: There is a bug in the current Git sources of core 2.4.0. Enter e.g. 'if %systime%' in the ESPeasy rules field and save it. It should be cut to 'if' !! It's a parser problem of the web server....
- 04 Feb 2018, 14:22
- Forum: ESP Easy: Software
- Topic: ESP Easy Mega rules problem
- Replies: 4
- Views: 4306
Re: ESP Easy Mega rules problem
LongPulse,<GPIO>,<value in sec> or LongPulse_mS,<GPIO>,<value im msec>.
On 4PowerOn Do
longpulse 4,1,2 //e.g. for set GPIO 4 to HIGH for 2 sec and reverts back to LOW.
EndOn
On 4PowerOn Do
longpulse 4,1,2 //e.g. for set GPIO 4 to HIGH for 2 sec and reverts back to LOW.
EndOn
- 30 Jan 2018, 19:08
- Forum: ESP Easy: General Discussion
- Topic: Event Processing - RFLink
- Replies: 5
- Views: 6021
Re: Event Processing - RFLink
On !RFLink# do what???
You have the task name !RFLink (I suggest not to use special characters like the !, better RFLink), but not the value after #!
See here...
https://www.letscontrolit.com/wiki/inde ... rial_Rules
You have the task name !RFLink (I suggest not to use special characters like the !, better RFLink), but not the value after #!
See here...
https://www.letscontrolit.com/wiki/inde ... rial_Rules
- 21 Jan 2018, 13:09
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
This is no clean solution. Give every device a unique name! E.g. PMSx003_1, PMSx003_2, and so on. The rule is also not correct. on PMSx003#PM25 do TaskValueSet 3,1,[PMSx003#PM1] TaskValueSet 4,1,[PMSx003#PM25] TaskValueSet 5,1,[PMSx003#PM10] endon You write a value to "TaskValueSet 4,1,[PMSx003...
- 21 Jan 2018, 12:44
- Forum: ESP Easy: Software
- Topic: MQTT Output helper acts different from GPIO command
- Replies: 3
- Views: 3323
Re: MQTT Output helper acts different from GPIO command
ESPeasy is too stupid to do an event processing (no rule is processed!) after receiving an MQTT command. That's the reason why _P029 exists as a "helper"...
- 21 Jan 2018, 12:32
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
I don't know if that trick works, but what is if you enter 3x the same device in ESPeasy (ok, it needs 3 tasks...), but with different IDX (20,21,22)? And with a correct configured controller, you don't need a rule, because ESPeasy sends the values in the given delay time to Domoticz.
- 20 Jan 2018, 21:21
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
The problem could be the IDX from Domoticz. In ESPeasy you have only IDX 20, but in Domoticz 20, 21 and 22....
- 20 Jan 2018, 20:21
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
I don't think that the sensor is broken. You see values in ESPeasy, so the communication is also ok. Have you setup a controller in ESPeasy (Domoticz HTTP)? Because I don't see a checkmark in "Send to controller".
- 20 Jan 2018, 18:41
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
Ok, so we know that the syntax of the command is right. Let's have a look at your device config. Can you post a screenshot (ESP easy)?
- 20 Jan 2018, 18:25
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
What makes Domoticz if you send it direct with the browser?
_http://192.168.0.4:8080/json.htm?type=command¶m=udevice&idx=22&nvalue=0&svalue=12.3
Does the value change to 12.3?
_http://192.168.0.4:8080/json.htm?type=command¶m=udevice&idx=22&nvalue=0&svalue=12.3
Does the value change to 12.3?
- 20 Jan 2018, 17:14
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
@grovkillen: It must be: ... type=command¶m= ... Your version with two "=" will never work.... From Domoticz's Wiki (https://www.domoticz.com/wiki/Domoticz_API/JSON_URL's): /json.htm? type=command¶m =udevice&idx=IDX&nvalue=0&svalue=TEMP Tested here and works. :D
- 20 Jan 2018, 16:19
- Forum: ESP Easy: Software
- Topic: Own idx, rules and domoticz
- Replies: 51
- Views: 47276
Re: Own idx, rules and domoticz
What is this after command?
command¶m=udev
Hope it is like this and is just a cut'n'paste problem:
command¶m
command¶m=udev
Hope it is like this and is just a cut'n'paste problem:
command¶m
- 19 Jan 2018, 14:23
- Forum: ESP Easy: Software
- Topic: ESP Easy v. 2.0 - SSD1306
- Replies: 10
- Views: 9800
Re: ESP Easy v. 2.0 - SSD1306
Ok, when you are able to compile your own version, it should not be an act to change the addresses in the source code.
- 19 Jan 2018, 14:17
- Forum: ESP Easy: Software
- Topic: ESP Easy v. 2.0 - SSD1306
- Replies: 10
- Views: 9800
Re: ESP Easy v. 2.0 - SSD1306
Check this out about this... http://wiki.modtronix.com/doku.php?id=tutorials:oled:ssd1306:tutorial_oled_ssd1306 The OLED has a solder jumper at the back for configuring the I2C address. When jumper is set to default setting of 0x78, use 0x3C in code When jumper is set to 0x7A, use 0x3D in code The r...
- 17 Jan 2018, 12:09
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Mega - timerSet & TaskValueSet not work
- Replies: 9
- Views: 7742
Re: ESP Easy Mega - timerSet & TaskValueSet not work
I made a cut & paste and the rule works with current git sources. The only thing is, that the set time is wrong. 1 sec takes >2 secs of time.
- 17 Jan 2018, 09:15
- Forum: ESP Easy: Software
- Topic: cannot get %eventvalue% to work
- Replies: 15
- Views: 10617
Re: cannot get %eventvalue% to work
@grovkillen: Micro$oft lives from user are not seeing what crap they use...
- 17 Jan 2018, 09:01
- Forum: ESP Easy: Software
- Topic: P029 MQTT helper works when disabled
- Replies: 6
- Views: 5373
Re: P029 MQTT helper works when disabled
I have no account on github. Maybe there is already an issue opened there....
- 17 Jan 2018, 08:59
- Forum: ESP Easy: Software
- Topic: cannot get %eventvalue% to work
- Replies: 15
- Views: 10617
Re: cannot get %eventvalue% to work
Ok Windows 10 is a virus of its own.... But, why are you using that old version of ESPeasy (R120)? You should try R147 or better 2.xx.
- 16 Jan 2018, 22:23
- Forum: ESP Easy: Software
- Topic: P029 MQTT helper works when disabled
- Replies: 6
- Views: 5373
Re: P029 MQTT helper works when disabled
Removing it from the settings webpage is no good idea. The solution is in fact in _C002. The first riddle you solved!
- 16 Jan 2018, 22:19
- Forum: ESP Easy: Software
- Topic: ESP Easy V2.0.0 Dev12; Rules not updating field
- Replies: 4
- Views: 4182
Re: ESP Easy V2.0.0 Dev12; Rules not updating field
I have checked the source code now and could not find the check for a entered square bracket. So I assume that only numbers (0-1) and operators (+-*/^) are allowed. NO task values!
- 16 Jan 2018, 21:44
- Forum: ESP Easy: Software
- Topic: P029 MQTT helper works when disabled
- Replies: 6
- Views: 5373
Re: P029 MQTT helper works when disabled
Don't worry, it's just one of the many bugs.... Can you compile your own version? Then I can give you the solution....
- 16 Jan 2018, 11:57
- Forum: ESP Easy: Software
- Topic: compile ESP ESAY MEGA tcp_impl.h not found
- Replies: 21
- Views: 15743
Re: compile ESP ESAY MEGA tcp_impl.h not found
Hint: Just delete all _P***.ino files in the src folder you are NOT using. That helps also sometimes to fix compiling issues and reduces the size of the sketch file.