Sometimes it is easier as expected.
I did my measuring again and the button do not pull it up it is doing the opposite.

Now everything works as expected.

Good idea,
you mean the settings under hardware?
But it seems that I did not do this mistake ...

Hello, I bought a somfy situo io remote and soldered to D5/6/7 the switches of the remote as well as VCC and GND. (similar to this https://www.hackster.io/beejayf/somfyduino-io-3d8283 ) I added 3 switch input devices with these settings: Device: Switch input - Switch Name: up Enabled: X Internal Pul...

You can upgrade to the Collection B build. That includes also all plugins available in Normal, with mostly the debug logging, but also a few less-used features, disabled. Just keep the ESP8266_4M1M part the same (cpu, flash and filesystem sizes), then the update should work fine. And also: Atom is ...

Hello, normally I am fine with this version ESP_Easy_mega_20221224_normal_ESP8266_4M1M But I am missing a BME680. Now I tried to understand the building guide to complie it with adding the _P106_BME680.ino my self. Then I was faced with additional issues with Atom and Platfomio ... Now I am complete...

Hello, i had been running these sensors on my Wemos: im Basis Binary: Light/Lux - BH1750 Environment - DS18b20 Analog input - internal Battery Environment - BMP280 My BMP280 broke down and I replaced it with a BME680. But I saw it is not basically supported in ESP_Easy_mega_20211224_normal_ESP8266_4...

OMG you are a genius!!!!
I tried i with an old NOKIA cable. Flashing etc no problems but the power delivered was obviously not enough!!!
All is working fine

Thank you so much ....

Thanks for the additional hints.

alt wifi did not work.
I tried after that
ESP_Easy_mega_20210503_test_A_alt_wifi_ESP8266_4M1M_VCC
and
ESP_Easy_mega_20210503_test_A_beta_ESP8266_4M1M

both ended in bootloops at network position


Maybe some more ideas?

Many Thanks for your reply. I flashed it with this one ESP_Easy_mega_20210503_normal_ESP8266_4M1M.bin (powered off after flashing) It seems that wifi start is causing issues? and received this: [spoiler] ▒U67 : Info : INIT : Booting version: (ESP82xx Core 2843a5ac, NONOS SDK 2.2.2-dev(38a443e), LWIP...

Please, any help is highly appreciated, I am very desperate.

hello all, normally I had never issues using esp easy. Now I bought new modules because of external antenna D1 mini pro 16M based esp-8266ex I flashed with this bin: ESP_Easy_mega_20210503_normal_beta_ESP8266_16M_LittleFS.bin But it ended up in a bootloop Due to my unexperience I am not able to deco...

Hello, I want to use a LDR on a Wemos D1 mini flashed with esp easy. Additionally I want to use the voltage measuring because the Wemos should be powered by a battery pack. current wiring: 3.3v --------- | LDR | ------------ADC | 10kohm | GND---------- ----- D0 | | ----- RST Is this basically possib...

Ahhh this setting was not present in my version.
I updated it right now.
Is 15 sec a good value?
What if this is left empty? I did not find something in the wiki ..

After reading Wiki part for deep sleep and hopefully understanding it:

Is this the value "Sleep Delay:"?
I guess I kept the initial 60 sec ...

No, this is for sleeping time not for time to be awake.

As far as I understood deep slep functiomn Wemos stays awake till all data is sent.

I'm currently testing lux sensor which seems not to be the best solution. # It is a bad solution, I already tried it. What I understood, the system used 2 temperature probes and measure the difference of temperature between both probes. Ok but what is the goal ? Why not only using the one under the...

Hello, I am running a Wemos D1 mini wit EasyESP and I love your work! This one is used to controle my roller shutters. Attached are 1 BMP280 1 DS18B20 all is powered with 2 18650 batteries both are charged with some solar panels. The Wemos is running in deep sleep and is sending data all 10 minutes ...

There is a %! inside Funny story: As desperate I was i used this one: https://www.letscontrolit.com/forum/viewtopic.php?f=4&t=3934 after flashing it showed same behavior. Today when i tried it again (plugged USB in the Laptop) it connected and it is working ... with all attempted before even wit...

I added two pictures to answer your questions.

I flashed this one:

ESP_Easy_v2.0-20180203_normal_ESP8266_4096

Hello I am using v2.0 to access my homenet I followed exactly the tutorial. All is running like expected but when I entered ssid and my pass it is going into an endless loop to enter the ssid stuff. I found a fitting threat but without an end/solution. Do you have an idea where to look for a solutio...