Search found 87 matches

by TungstenE2
09 Nov 2019, 12:57
Forum: ESP Easy: Projects / Applications
Topic: dosing pump for fish tank
Replies: 6
Views: 2667

Re: dosing pump for fish tank

Hi Shardan, thx for sharing your thoughs. Currently I would plan to buy the following: Motorshield: https://de.aliexpress.com/item/32898563025.html Wemos D1: https://de.aliexpress.com/item/32758176555.html Also, the motorshield powers the Wemos D1. This means that you only have to power the motor sh...
by TungstenE2
07 Nov 2019, 17:35
Forum: ESP Easy: Hardware
Topic: Motor Shield v2.0
Replies: 20
Views: 2865

Re: Motor Shield v2.0

what kind of power supply do you use to power the Wemos D1 board over the Motorshield and the motors?
by TungstenE2
07 Nov 2019, 17:06
Forum: ESP Easy: Hardware
Topic: Motor Shield v2.0
Replies: 20
Views: 2865

Re: Motor Shield v2.0

You are referring to plugin P048_Motorshield_v2.ino which is in Status 'Testing', right?

https://www.letscontrolit.com/wiki/inde ... lugin_list

Raised a request to move status to 'Normal': https://github.com/letscontrolit/ESPEasy/issues/2717
by TungstenE2
07 Nov 2019, 16:49
Forum: ESP Easy: Hardware
Topic: Motor Shield v2.0
Replies: 20
Views: 2865

Re: Motor Shield v2.0

thx for all the details, but the motor link is not working. can you update? - which motor did you use? (stepper or normal DC) https://nl.aliexpress.com/item/32907886993.html?spm=a2g0s.9042311.0.0.27424c4dU1XzNl I used this motor, because the motorshield can only handle up to i believe 1.2 amps or so...
by TungstenE2
07 Nov 2019, 14:20
Forum: ESP Easy: Projects / Applications
Topic: dosing pump for fish tank
Replies: 6
Views: 2667

dosing pump for fish tank

Hi all, I have seen some post during the last years on different solutions on dosing pumps, but none of them with all details or final status. I would like to build a dosing pump for my fish tank in order to have fertilizer adding automated using Wemos D1 mini and ESPeasy. Dosing should be about 4ml...
by TungstenE2
07 Nov 2019, 13:57
Forum: ESP Easy: Hardware
Topic: Motor Shield v2.0
Replies: 20
Views: 2865

Re: Motor Shield v2.0

nice project, I have my chicken door operated with ESPeasy. My questions are: - which motor shield did you use? (link) - which motor did you use? (stepper or normal DC) - how did you configure the motor in ESPeasy? As the chicken feeder is not so precise, as I assume, I am planning for a dosing pump...
by TungstenE2
07 Nov 2019, 13:38
Forum: ESP Easy: Software
Topic: Question to the "setPluginTaskTimer" function
Replies: 5
Views: 778

Re: Question to the "setPluginTaskTimer" function

sad to see that michael3 is not sharing his plugin with the Forum, after he got an answer. As he did not visit the Forum since his last answer he als did not get my PM.
by TungstenE2
07 Nov 2019, 13:22
Forum: ESP Easy: Hardware
Topic: Motor Shield v2.0
Replies: 20
Views: 2865

Re: Motor Shield v2.0

@kirelam: I am also very interesed in your setup, hardware and configuration. Would you mind to share this information (links, screenshots) with us?

I plan to build a dosing pump and struggle to find working hardware with ESPeasy.

thx
by TungstenE2
07 Nov 2019, 13:17
Forum: ESP Easy: Software
Topic: Esp Easy and Wemos Motor Shield
Replies: 22
Views: 6316

Re: Esp Easy and Wemos Motor Shield

sorry, I can not support on V2 version, but V1 version is still available and should work.

https://de.aliexpress.com/item/32920107053.html
by TungstenE2
20 Aug 2019, 11:16
Forum: ESP Easy: Software
Topic: Question to the "setPluginTaskTimer" function
Replies: 5
Views: 778

Re: Question to the "setPluginTaskTimer" function

any news on this dosing pump plugin? can not find it in the plugin list.
by TungstenE2
29 Jan 2019, 10:15
Forum: ESP Easy: General Discussion
Topic: new Plugins - testing period
Replies: 2
Views: 609

new Plugins - testing period

Hi team,

is there a process/roadmap when new plugins will be moved from testing to normal status? (eg P079)

https://www.letscontrolit.com/wiki/inde ... lugin_list

br
by TungstenE2
12 Jan 2019, 17:26
Forum: ESP Easy: Software
Topic: send sunrise/sunset variables to controller
Replies: 1
Views: 549

send sunrise/sunset variables to controller

Hi all, is there a way to send the sunrise/sunset variables to controller (FHEM)? I would like to show the sunrise/sunset time in my FHEM Tablet UI. There reason why I do not use the sunrise modul: https://fhem.de/commandref.html#SUNRISE_EL Seems like FHEM is using the civil calculation by default. ...
by TungstenE2
05 Dec 2018, 21:38
Forum: ESP Easy: General Discussion
Topic: deep sleep with manual wake up - how?
Replies: 6
Views: 1018

Re: deep sleep with manual wake up - how?

thx, that part was missing.

working now!
by TungstenE2
05 Dec 2018, 19:16
Forum: ESP Easy: General Discussion
Topic: deep sleep with manual wake up - how?
Replies: 6
Views: 1018

Re: deep sleep with manual wake up - how?

I have changed settings to
wake 60
sleep 0
but device does not go to sleep, even after reboot?

What am I missing?
deepsleep2.PNG
deepsleep2.PNG (9.51 KiB) Viewed 1009 times
by TungstenE2
05 Dec 2018, 19:05
Forum: ESP Easy: General Discussion
Topic: deep sleep with manual wake up - how?
Replies: 6
Views: 1018

Re: deep sleep with manual wake up - how?

thx. wiki and other posts I found were outdated
by TungstenE2
05 Dec 2018, 18:45
Forum: ESP Easy: General Discussion
Topic: deep sleep with manual wake up - how?
Replies: 6
Views: 1018

deep sleep with manual wake up - how?

Hi all, I am on mega-20181204 on Wemos D1 mini. I want my D1 mini to wake up from deep sleep if door bell is pressed and to trigger FHEM to have my phones via Fritzbox ringing. In general the door bell is conected via PC817 to D1 mini and I see status change correctly. Now I want to conect this to R...
by TungstenE2
16 Nov 2018, 15:02
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

done, but still the same... On System#Boot do TaskValueSet 2,1,0 TaskValueSet 2,2,0 endon on Heizung#Lux do if [Heizung#Lux]=0 do timerSet,2,30 endif if [Heizung#Lux]>20 TaskValueSet,2,1,1 endif if [Heizung#Lux]<5 TaskValueSet,2,1,0 endif if [Heizung#Lux]>2 do timerSet,1,1 endif endon // set Heating...
by TungstenE2
16 Nov 2018, 12:50
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

moved it, but still the same result On System#Boot do TaskValueSet 2,1,0 TaskValueSet 2,2,0 endon on Heizung#Lux do if [Heizung#Lux]>20 TaskValueSet,2,1,1 endif if [Heizung#Lux]<5 TaskValueSet,2,1,0 endif if [Heizung#Lux]>2 do timerSet,1,1 endif if [Heizung#Lux]=0 do timerSet,2,30 endif endon // set...
by TungstenE2
16 Nov 2018, 11:49
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

hm, still not working as expected. If heating is on, Lux is up to 24 and HeatingLED is 1 and HeatingError is 0. If heating is off, Lux is 0 and HeatingLED is 0 but HeatingError is 1 and is not reset. This is triggered as the tigger sees the LED is switching from 1to 0, but this should be reset, as i...
by TungstenE2
16 Nov 2018, 10:07
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

thx, included it, but seems not to be working. On System#Boot do TaskValueSet 2,1,0 TaskValueSet 2,2,0 endon // reset HeatingError after 90Sek on Heizung#Lux=0 do timerSet,2,90 endon on rules#timer=2 do TaskValueSet 2,2,0 TaskRun,2 endon // set HeatingLED on Heizung#Lux>20 do TaskValueSet 2,1,1 endo...
by TungstenE2
16 Nov 2018, 07:23
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

can you provide me with the syntax of 'task run'? do not find a sample in the rules wiki.
by TungstenE2
15 Nov 2018, 18:18
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

setup following rules: On System#Boot do TaskValueSet 2,1,0 TaskValueSet 2,2,0 endon // reset HeatingError after 90Sek on Heizung#Lux=0 do timerSet,2,90 endon on rules#timer=2 do TaskValueSet 2,2,0 endon // set HeatingLED on Heizung#Lux>20 do TaskValueSet 2,1,1 endon on Heizung#Lux<5 do TaskValueSet...
by TungstenE2
14 Nov 2018, 08:38
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

Re: BH1750 - heating status

ok, thx. So I will try to setup a dummy switch which will be set by a rule if lux >2. This will indicated the LED is on. But I have a question on the timer and long press. How does the sample rule distinguish between short press and still pressed? Is this because the timer was triggered and when the...
by TungstenE2
13 Nov 2018, 20:12
Forum: ESP Easy: Projects / Applications
Topic: BH1750 - heating status
Replies: 14
Views: 1711

BH1750 - heating status

Hi all, I have BH1750 installed on Wemos D1 mini and attached to my central heating in the basement. There is a small red status LED, where I would like to catch the status. In normal mode the LED is turned on while heating. Lux = 3-4 If heating is off Lux = 0 In case of failure the LED is blinking,...
by TungstenE2
09 Nov 2018, 14:27
Forum: ESP Easy: General Discussion
Topic: Help - update bricked S20
Replies: 43
Views: 8898

Re: Help - update bricked S20

@TD-er please als add a warning that flashing on Wemos D1 min from v2.0 to mega will also very likely fail and brick the device.

http://www.letscontrolit.com/forum/view ... f=4&t=6050
by TungstenE2
09 Nov 2018, 13:35
Forum: ESP Easy: General Discussion
Topic: OTA flash failed - v2.0-20180203 to mega-20181108
Replies: 3
Views: 641

OTA flash failed - v2.0-20180203 to mega-20181108

Hi all, I have the following problem: https://github.com/letscontrolit/ESPEasy/issues/2030 Tried to flash via UART but also get error. ######2018-11-09###### #######0.02.004####### ######FLASH INFO###### BIN file: ESP_Easy_mega-20181108_normal_ESP8266_4096.bin COM port: (COM9) USB Serial Port Baud r...
by TungstenE2
31 Oct 2018, 14:46
Forum: ESP Easy: Software
Topic: Esp Easy and Wemos Motor Shield
Replies: 22
Views: 6316

Re: Esp Easy and Wemos Motor Shield

can you post error message?

I am using ESP_Easy_mega-20180927_test_ESP8266_4096.bin

And I use A1, A2:
WemosMotorShieldCMD 0 Forward 30

Device Name: WemosDCMotor
by TungstenE2
31 Oct 2018, 13:39
Forum: ESP Easy: Software
Topic: Esp Easy and Wemos Motor Shield
Replies: 22
Views: 6316

Re: Esp Easy and Wemos Motor Shield

did you flash ESPeasy testing version? Only in testing version the plugin is included.

just follow the wiki.

https://www.letscontrolit.com/wiki/inde ... otorshield
by TungstenE2
29 Aug 2018, 15:13
Forum: ESP Easy: Software
Topic: Esp Easy and Wemos Motor Shield
Replies: 22
Views: 6316

Re: Esp Easy and Wemos Motor Shield

Wemos Motor Shield Plugin is now in official mega release!

See wiki:
https://www.letscontrolit.com/wiki/inde ... otorshield
by TungstenE2
06 Jul 2018, 12:45
Forum: ESP Easy: Software
Topic: sunrise/sunset to be used in rule
Replies: 14
Views: 3981

Re: sunrise/sunset to be used in rule

this is working great! thx! On Clock#Time=All,%sunrise% do <action> endon That makes it possible to do something at sunrise or sunset and also start a timer to do something at those moments + N seconds. //at sunrise time set timer1 for 1 hour On Clock#Time=All,%sunrise% do timerSet,1,3600 endon //Wh...
by TungstenE2
04 Jul 2018, 14:51
Forum: ESP Easy: Software
Topic: [Solved] Trigger rule on event
Replies: 2
Views: 592

Re: Trigger rule on event

check device setting interval
by TungstenE2
04 Jul 2018, 14:47
Forum: ESP Easy: Software
Topic: sunrise/sunset to be used in rule
Replies: 14
Views: 3981

Re: sunrise/sunset to be used in rule

could someone give an example rule how to use %sunrise% and %sunset% variables? on this page nothing is mentioned on how to use variables: https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules would this be something like this? on %sunrise% do if <test> <action> <action> endif endon
by TungstenE2
04 Jul 2018, 08:58
Forum: ESP Easy: Software
Topic: sending Password in URL by Android App
Replies: 1
Views: 505

sending Password in URL by Android App

Hi all,

is there a way to send the Password in URL?

I am using this App.
viewtopic.php?t=3447

When I set the password in ESPeasy I need to send the Pasword by the App.

So I was wondering how to do this. Any ideas?

thx
by TungstenE2
04 Jul 2018, 08:41
Forum: ESP Easy: Software
Topic: sunrise/sunset to be used in rule
Replies: 14
Views: 3981

Re: sunrise/sunset to be used in rule

I was just about to test it.

New %sunrise% and %sunset% variables were added, but I am not sure about the syntax to be used in rules.

Is there a way to test the variables?

https://www.letscontrolit.com/wiki/inde ... _Variables
by TungstenE2
14 Jun 2018, 22:07
Forum: ESP Easy: Software
Topic: several rules
Replies: 27
Views: 4547

Re: several rules

thx danmero, changed it.
by TungstenE2
14 Jun 2018, 11:05
Forum: ESP Easy: Software
Topic: set GPIO state other than 0 or 1
Replies: 1
Views: 558

set GPIO state other than 0 or 1

I can set GPIO state by command to other values than 0 or 1.

Even this state is not shown in the list of devices (it stays 1) the status is stored.

Does this have any negative side effects?

Would like to use this for state controlling and request state by URL.
gpio2.jpg
gpio2.jpg (21.93 KiB) Viewed 557 times
gpio2.jpg
gpio2.jpg (21.93 KiB) Viewed 558 times

thx
by TungstenE2
13 Jun 2018, 21:43
Forum: ESP Easy: Software
Topic: get value status from dummy device
Replies: 0
Views: 551

get value status from dummy device

Hi all,

I can request status for GPIO with URL:
http://IP/tools?cmd=status+gpio+15

I can set status for dummy with URL:
http://IP/tools?cmd=TaskValueSet+7+3+1

How to request status from dummy by URL?
Is there a TaskValueRead?

thx
by TungstenE2
11 Jun 2018, 21:02
Forum: ESP Easy: Software
Topic: several rules
Replies: 27
Views: 4547

Re: several rules

thx, added your rules partly. state of door is already known by state of reed1 and reed2. On System#Boot do TaskValueSet 7,1,0 // no day = 0 TaskValueSet 7,2,200 // Helligkeit on dummy sensor TaskValueSet 7,3,0 // DC Motor off TaskValueSet 7,4,0 // Timer off TaskValueSet 8,1,999 // To concat of some...
by TungstenE2
10 Jun 2018, 19:50
Forum: ESP Easy: Software
Topic: Esp Easy and Wemos Motor Shield
Replies: 22
Views: 6316

Re: Esp Easy and Wemos Motor Shield

added new Plugin for Wemos Motorshield P_078 in Testing

https://github.com/letscontrolit/ESPEasy/pull/1492
by TungstenE2
10 Jun 2018, 12:39
Forum: ESP Easy: Software
Topic: several rules
Replies: 27
Views: 4547

Re: several rules

ok, got this now working with events. door motor is triggered by push button or cmd. so basic version is working, as wife is asking for POC... but this is manual interaction. next step is automation. either based on light sensor or weekday and time. On System#Boot do TaskValueSet 7,1,0 // no day = 0...
by TungstenE2
10 Jun 2018, 09:48
Forum: ESP Easy: Software
Topic: several rules
Replies: 27
Views: 4547

Re: several rules

I was refering to this: //Dummy1 //999 default //1[Dummies#Tag][Reed1-oben#Switch][Reed2-unten#Switch] //1110 day door open //1101 day door down //1010 night door open //1001 night door down On System#Boot do TaskValueSet 7,1,0 // no day = 0 TaskValueSet 7,2,200 // Helligkeit on dummy sensor TaskVal...
by TungstenE2
09 Jun 2018, 21:34
Forum: ESP Easy: Software
Topic: several rules
Replies: 27
Views: 4547

Re: several rules

thx, the event works in general, but the motor does not stop if [Reed1-oben#Switch] changes from 0 to 1. But this should be the case, right? If I release the [Taster1#Switch] and press it again, while [Reed1-oben#Switch] is still 1 motor does not start again. This is correct. Also if [Reed1-oben#Swi...