Let's Control It

Wiki

Thank you very much, your guess gives me a good idea about using the e-ink display. I am planning to put it aside my Kamado grill to get an idea of the temperature, driven by small liion batteries. Update will be somewhat like every minute, following your suggestions with an entire screen update. Fo...

Wiki

Just a word of warning. Do not update e-ink displays too often as it will literally wear out and the pixels may fade. I am just playing around with the same display and noticed your warning. Couls you give me an idea about the life span of the display? Something like the limited erase cycles of fla...

Wiki

Thanks for the explanation.

Am I wrong if I guess that the FCnt could be stored in the RTC memory like the Dummy values? Should survive the reboot and deep sleep, so performing a new OTAA should only be needed after power loss?

Wiki

Hi, looks like I have to wait a little bit. Is there any time schedule for support of the nowadays commonly used SX12xx chips? I'm not in hurry, just starting. And before spending my small money on something like helxxxc which I have to program by myself I would be patient. Here around are some effo...

Wiki

Hi,

I just want to start in Lora/TTN and am looking for a RN2483 module which is useful for ESPEasy.

Having a look at Ali, I can't find a RN2483 868MHz module. Where do I get such a module and is there anywhere a wiring diagram?

Wiki

Hi,

pretty busy during the past few days with other non-catastrophic problems my answer:

Thank you very much, I appreciate again, one more time.

I'll play around with these new opportunities a while.

Wiki

Moin, after years I finally succeeded in setting up the development environment in Visual Studio / Platformio resulting in being able to produce customized builds according to my special needs. I highly appreciate the work you have done. Question: Is there a way to include additional fonts for TFT d...

Wiki

Yes, I am using different sizes (3 and 6) on the screen and a TFT 240x320 to be able reading it from a little bit larger distance. Thats exactly why I would like a font with higher resolution, the roundings of the standard font at this size are looking like stairways. I am a little bit spoiled from ...

Wiki

Hi, Thanks for the information, this fact I've had already in mind. Up to now I was not able to create a working environment for building customized binaries by myself. Looks like I will give it another try in the next days. There are some other wishes which are not covered by the standard releases,...

Wiki

Hi, I am using an ILI9341 with a Wemos D1 to show various MQTT topics from my offgrid energy production/consumption. Works so far pretty good, Thanks to whoever added these devices and MQTT import in the past. I interpreted the documentation, that at least three additional fonts should be available....

Wiki

Yep, couldn't agree more following Murphy's theorem, teached during my whole life. The old ones are definitely out of different batches. The bricked has a red onboard LED, the one now ready for testing o blue one. Rest looks similar. What might harden your hypothesis on the cause for bricking the de...

Wiki

Compared with you I am just an amateur who tries to get as much out of the (Io)things. And I trust your opinion. I did a quick check on the two ESP32 which are currently running, none of them tells me the chip verndor id 0x20, one is an also pretty old ESP32-WROOM, the other a freshly ordered ESP32 ...

Wiki

And the board has an age of around five years. I followed the link in the discussion to espressif and it seems that this old board doesn't fit in the hardware specifications they mentioned.

Wiki

Erm, and I did the upgrade OTA.

Wiki

I've had a deeper look at the link you gave right away you posted it and understood what might have happened. I didn't know anything of it before. If I remember right, I've flashed the device initially for testing the Dallas using the _factory.bin from 20220909. Does this fit your scheme of "on...

Wiki

No way to flash the device. The serial chip is recognized (think its the CP21xx) but flasher doesn't get contact to the CPU or whatever it tries to connect to. It worked stable >24h with the last firmware and I can't imagine that there is any relation to the firmware, it just gave up and exhaled its...

Wiki

Back again - shopping was not possible because my old car just stopped running. Seems to be the day of not working techniques. Replaced the ESP32 on my breadboard, so further testing will be possible. If I shall test anything else than what I already posted please don't hesitate to give me a ping ju...

Wiki

I've set Serial Log Level to none. Same effect: Up to two of the tasks with lean MQTT import in sync, third enabled results in a time lack of 15 secs. Couldn't test more, My pretty old, first ESP-Wroom-32 stopped working and now it is bricked. Neither flashing works. seems as if it has reached its e...

Wiki

I took the device which I've setup for the test if the Dallas is still working. So yes, its the build from 2022-11-23 22:36:04, _normal_ESP32_4M316k. I didn't disable the serial log. But no serial connection. The time lack I am logging using the Web GUI with On Test5#Watt Do LogEntry,%systime%-Watt(...

Wiki

Just for curiosity I took the advange of having the ESP32 for testing available I configured 7 MQTT Import tasks, 6 for importing each 4 - different - values without Import options set out of the 43 data sets Ahoy fires every 5 seconds into the MQTT broker. One task I've configured to read the out p...

Wiki

Just noticed:

MQTT Import doesn't process formulas? Tried %value%*1000, value stays original.

Wiki

Dallas looks OK, I have now added an LED on GPIO 23, longpulse,23,1,1,1,-1 works as expected. On my tablet I can't take a useable screenshot, so Timing Stats as plain text. Hope its readable. P_4_Environment - DS18b20 READ 3012 0.40 0.85 12.975 21.361 31.200 P_4_Environment - DS18b20 ONCE_A_SECOND 7...

Wiki

Well checking if it works was a fast job.

Yes it does, as well as longpulse (one second -1 on onboard LED).

But now I'm gone....

Wiki

Where do I have too look at? I just flashed 20220909_normal_ESP32, added two Dallas, GPIO22, one task, dual, single event with all values, 5 secs interval. No overwhelming LoadTaskSettings count, only when I leave the configuration page. Otherwise it disappears. 220909_mit_Dallas.JPG Right now I hav...

Wiki

Coming back to life again I give a short intermediate report. After a runtime of 15 1/2 hours overnight the Timing Stats of the binary from the last dropbox upload posted including the additional MQTT Import task enabled tell me a LoadTaskSettings #call of 14, no time dicrepance between sent/receive...

Wiki

I will check the last linked on dropbox against a ESP_Easy_mega_20220909_normal_ESP32_4M316k.

Is that OK?

Wiki

Jep, that's how I understood the functionality and what I did to see at least something. Taking into account that you currently have been working at the LoadTaskSettings stuff again I want to offer the opportunity for you to get some more checks concerning the thematics of LoadTaskSettings aside my ...

Wiki

I flashed the second one you've posted. Hey man, you are kidding me. First of all I had a look at the sent/received sync. ESPEasy now is looking into the future, receive is logged one second before the time the timestamp of the Volkszähler topics show. Pretty fast, I think :mrgreen: And in the Timin...

Wiki

....tomorrow, due to lack of sun I don't get any messages more to receive.....

Wiki

I'll report.....

Wiki

And btw.: using ESP32_normal_4M316k

Wiki

If you need some beta testing I would be pleased if I could do this for you. My project is not yet time critical, I can play around as much as I want. Hardware is till close to my laptop, nothing I couldn't influence manually. Time is no question currently. Open for any stupidity

.

Wiki

No. This device is using 4 tasks MQTT Import and 2 tasks Dummy. No further tasks or sensors. In rules dependig on a five-seconds-event I am publishing seven values to Domoticz, depending on a ten-seconds-event three values to Domoticz (both are triggered by MQTT Import events, 3-4 calculations proce...

Wiki

No, no formulas.

Vales are processed in my rules if necessary.

Wiki

TD-er wrote: ↑23 Nov 2022, 11:18
Wiki wrote: ↑23 Nov 2022, 10:50 [...] never stop learning
I won't

so do I

Wiki

Additional information: I've changed the task with the four subscriptions to domoticz/in to import the data directly from source, Resp. I've changed the import from JSON parsing&filtering to lean MQTT Import without any options. At this moment the LoadTaskSettings raise from 12/sec to >20/sec. F...

Wiki

TD-er wrote: ↑22 Nov 2022, 18:25 Web log level is dynamic and is based on whether you fetch the logs.
So the shown log level is the actual log level.

That's cool, never stop learning

Wiki

Overnight I left the task with four subscriptions to domoticz/in on. Now with sunlight and Ahoy publishing its 43 values every 5 secs as well as the four domoticz/in values published (from my Raspberry, its a relict from my first tries to get the project run) there was a timeshift of around 9 secs v...

Wiki

[OT On]
System Info / System Status Web Log Level shows "None"
This is incorrect, I've set it to "Error"
[/OT Off]

Wiki

First quick checK: No timeshift anymore, perfectly synchronious send/receive, even with enabled domoticz/in subscription! Way better performance of Web GUI Almost no hesitation in publishing data for Domoticz (before it took at least two seconds before the data appeared in Web frontend from Domoticz...

Wiki

Hi, I think I can reproduce the behaviour of timeshift between sent and received data. Yesterday in the evening I realized that I have to disable the setting "Prevent Loop" in the MQTT client gateway of Domoticz because otherwise publishing the "command":"switchlight" f...

Wiki

Digging a little bit deeper I've seen a huge amount of messages on topic domoticz/out. Häh? Why? The configuration in Domoticz's MQTT Client gateway for "Prevent Loop" was set to false. No good idea. Set to true lowers: Incoming MQTT to 1.32/sec Load Task Settings to 3.9/sec TryOpenFile to...

Wiki

More: one of the tasks /four values) is subscribed to domoticz/in with JSON parsing, filtered by idx, in another task two values are subscribed to domoticz/out, filtered by idx, too.

I will change at least the import of topics from domoticz/in and see what happens...

Wiki

Rules cache is enabled.

Wiki

[...] Also you seem to receive 6.7 MQTT messages per second. No idea what the broker may do when a message is not acknowledged by the client. [...] Erm, it looks like you've pushed me in the right direction together with my feeling, that somewhere the data are queued/spooled/buffered/whatever. I ha...

Wiki

OK, once again: ESPEasy: 1194215: 13:45:20-Watt(-13),1 1208505: 13:45:34-Watt(45),1 1208718: 13:45:34-PowerSet(165),1 1216774: 13:45:42-Watt(37),1 1225015: 13:45:50-Watt(46),1 1231875: 13:45:57-Watt(-3),1 1241571: 13:46:07-Watt(-11),1 1252682: 13:46:18-Watt(-8),1 1262493: 13:46:28-Watt(-4),1 1272235...

Wiki

I did some logging in ESPEasy and in my Raspberry in parallel. ESPEasy: 262797: 13:01:17-Watt(2),1 273161: 13:01:27-Watt(-5),1 282785: 13:01:36-Watt(-4),1 292693: 13:01:46-Watt(-5),1 303079: 13:01:56-Watt(-5),1 313656: 13:02:07-Watt(-6),1 324963: 13:02:18-Watt(2),1 335934: 13:02:29-Watt(1),1 345009:...

Wiki

Found the hook for timing stats.

Which information do you need when?

Wiki

Erm, where could I enable "timing statistics"?

Wiki

I only have limited possibilties to monitor. But just right now I have seen in a split screen that there was a time lack between the "log" on the Raspberry (mosquitto_sub -t "#" | grep Watt) and the change of the device in Domoticz of 32 secs. After reboot the time lack went down...

Search found 420 matches