ThomasB wrote: ↑18 Oct 2020, 00:34 If you don't mind soldering three wires then consider adding a PIR module to a ESPEasy compatible device:
https://www.letscontrolit.com/wiki/index.php/PIR_Sensor

- Thomas

I don't mind soldering, but then i have to look for a suitable outdoor housing for it.

Hy, I'm looking for a (tuya) Pir sensor wich can be flashed by espeasy. I already tried this one: https://nl.aliexpress.com/item/4000808875375.html?spm=a2g0o.productlist.0.0.49cb3934SurW27&algo_pvid=fce26720-227b-4f0d-abe2-1016bbf9a19c&algo_expid=fce26720-227b-4f0d-abe2-1016bbf9a19c-9&bt...

I tried to flash espeasy on sonoff S20. The flash seems to be succesfull but there is no wifi-connection. I used flashesp8266.exe to flash different versions of espeasy and espeasy-mega. I also tried esptool. nothing seems to work. flash is always succesfull, but no wifi. sonoff s20 version: S20_EU_...

The command PCFGPIO,1,1 is working when used in the tools/command. problem with the PCF stays the same. (when i send the comman PCFGPIO,2,1 the 2nd output of the PCF goes high, but the 1st output goes low again) The rules i made, don't seem to work: on RL1-4#RL1=1 do PCFGPIO,1,1 endon on RL1-4#RL1=0...

I don't know anything about github.
What is the simplest way to update to the newest version?

[/quote] Interesting. Did you try the "PCFGPIO,<pin>,<state>" command also? [/quote] I just tested the dummy switch device. device name:RL1-4. Values: RL1, RL2, RL3, RL4 The mqtt part works. I used some rules to let it interact with the pcf8574. Rules: - on RL1-4#RL1=1 do PCFGPIO,1,1 endon...

I now used your example to let it work with the device "Extra IO - PCF8574" i kept the same properties for the mqtt controler: Report topic: %sysname%/#/state Command topic: %sysname%/#/set I created 8 devices of the type "Extra IO - PCF8574" with the following settings: I named ...

Great, it works!
Thanks a lot for your advice, and for your patiance.

Thanks again for your advie. But I'm afraid i don't have sufficient knowlegde to fully understand your advice. I now use following properties: Generic MQTT controller: - Report topic: %valname%/status - Command topic: %valname%/set Device: Output - Domoticz Output Helper (No feedback) - Data Acquisi...

Is there a way to import MQTT - values? Both Domoticz MQTT and Generic MQTT controllers supports two way communications in RPIEasy. For example if you have added a "Generic MQTT controller" and a "Dummy device", than you can send variables to RPIEasy devices from MQTT through th...

I'm missing the "Generic - MQTT Import"-device as in ESPEasy.

Is there a way to import MQTT - values?

I'm using 4 pcf8574 expanders to create 32 "switch input" devices.
But in the device-tab in espeasy there are only 12 devices to configure.

Is there a way to increase the amount of devices?

seems like it's the refresh time of my browser.

Any idea how i can reduce that?

There was no space behind the %. Unfortuanaly the github conversation is on this moment still chinese for me. But i found the reason. The responce time is +- 40 seconds. So i just didn't waited long enough to see the value changing. But how can i reduce the time between pushing a button on one devic...

Thanks grovkillen, i am learning every day... I have now 2 esp8266 running. One named "woonkamer 1" and one names "luidsprekers" on "woonkamer 1" i installed 1 controler and 2 devices: - mqtt openhab controler Controller Subscribe: %sysname%/# Controller Publish: %tskna...

Thanks a lot,

Thats's works fine.

Just to undertand the whole picture, could you explain what's the meaning/purpose of:
- Controller lwl topic:
- LWT Connect Message:
- LWT Disconnect Message:

Thanks for your answer.
I removed the / but that makes no difference.

What do you mean with "make sure that MQTT Lens is subscribing to that empty first level"

any other advice?

Hy, I’m a new user of ESPeasy on a ESP8266 Mi goal is to publish MQTT messages from the esp to a mosquitto broker. I have a working MQTT mosquitto broker. I tested it with MQTT lens. In ESPeasy I also installed the controler. Controller Settings Protocol: Openhab MQTT Locate Controller: Use IP addre...