Let's Control It

mra2ko

There is no change when SF is changed. When I change "Max Queue Depth" there will be a change Dallas and Ina sensor, but still not have all info in one msg. OK, I think I misinterpreted your question then. What do you mean by "in one message" ? How often do you try to send to th...

mra2ko

There is no change when SF is changed. When I change "Max Queue Depth" there will be a change Dallas and Ina sensor, but still not have all info in one msg.

mra2ko

Sry, but I dont know, what you exactly mean...?

mra2ko

Is connected by OTAA, any idea what change ?

mra2ko

I am Owner, easy to me...
As you see, some down are...

Device

: dwn.JPG (148.9 KiB) Viewed 3935 times

GW

: dwn2.JPG (116.68 KiB) Viewed 3935 times

mra2ko

Yes, SF is 7, strong signal...
Maybee any exact setup for IDX or time send in device list ?
This issue dont have exactly "key" every hour, day is random exact random hi
I have now two sensors and both make the same problem...

mra2ko

All see ok... ?

: setup.JPG (49.03 KiB) Viewed 4046 times

mra2ko

Hi, I have some devices connected over Lora, but have the same problem for all of them... For example have in device two sensors, DS18B20 and INA219, time for send is 60s. Problem is, ESP send 10x info from INA and 1x from DS18B20, i dont know what is wrong. Ideal for me is send info from both in on...

mra2ko

Hi,
I would like run fan every day from 6:00 to 22:00. It is formula below ok ?
Thank

On Clock#Time=All,6:00 do
gpio,14,1
endon
On Clock#Time=All,22:00 do
gpio,14,0
endon

mra2ko

Load cells are temperature dependent, see bellow the graphs...
Load are still the same, when the temperature drops the weight also drops.
Can you pls post exact wire setup for next cell.
Thank !

: 2.JPG (37.39 KiB) Viewed 2814 times

: 1.JPG (35.99 KiB) Viewed 2814 times

mra2ko

Now weight measure working ok, but...
Any exactly wiring for temperature compensate ?

mra2ko

How are the load cells connected? Sometimes it may also be a grounding issue (e.g. you need to connect E- to the GND of the board) But you may need to check the datasheet for that. Cells are coneccted as is on the pic. With the stable load is output in device very unstable. Výstřižek.JPG Thank to h...

mra2ko

Hi, anybody who can help me please with setup HX711 with 4 load cell to get real weight number out ?
I have all wired, I see numbers in device list, but nonsense numbers, still changing and I am not able get real output.

Thank

mra2ko

Inside is INA for measure current from solar and actual voltage of accu.
Outside is Dallas for temperature and sensor for actual water level in well + Dallas for water temp

: IMG_9295.JPG (4.35 MiB) Viewed 5202 times

chemmex wrote: ↑20 May 2022, 18:19 Looks gorgeous. What type(s) of sensors are you using there?

mra2ko

Here is my first LORA solar power outside sensor.
TNX to TD-er for solving some troubles

: IMG_9528.JPG (3.32 MiB) Viewed 5288 times

: IMG_9495.JPG (4.46 MiB) Viewed 5288 times

mra2ko

Well, thank to reply, I test it... !
TNX

mra2ko

Hello all,
I would like use weight sensor with HX711, so HX711 is still in testing progress ? Or in whitch firmware is possible found.
Thank !
Joe

mra2ko

Thank, I test it!

mra2ko

I would like measure outside ambient noise, but i think normal mics are not good for long time outdoor use... ?
Maybee something as this https://wiki.dfrobot.com/Gravity__Analo ... KU_SEN0232 but with different mic.. ?
Any idea ?

mra2ko

Hi,
anybody any idea, how measure outside ambient sound ?
Cheap solution

- sensor must be for outdoor
- ideal analog output

Thank

mra2ko

Yes! Working, thank !

mra2ko

You mean button od sonoff device ?
About the power, I know, read before on web, but thank !

mra2ko

Hi,
I buy this new one Sonoff baisc R2 V1.3, but I am not able flash... Is not possible connect to serial.
Any idea what ? Maybee is too new ?
I use ESP-01 USB ESP8266 programer.
Thank

mra2ko

In Czech Republic. Well, or if you have gerber data, I can make self...
Thank !

TD-er wrote: ↑28 Dec 2021, 13:18 Where do you live?
Maybe I can also send you one of them.

mra2ko

Can you post please your board ?

TD-er wrote: ↑27 Dec 2021, 22:57 As far as I know, there is not an of-the-shelf board available with the RN2483 module on it.
I have made several boards using this module myself and others have soldered their own.

mra2ko

Hi,
pls you can write me here, whitch board for ESP Easy whitch working with Lora TTN ?
Thank

mra2ko

I can use some sensors from old WX... Is also home-made, but i am problem with posting data out from local site. I would like use node-red, mqtt and other, is better... I found VEML6075 but is not supported in las version fw, anybody know what is not supported? Some pic from old WX... IMG_2446.JPG I...

mra2ko

Hi,
someone who would help with the measurement of wind speet and direct, ozone, uv index and daylight (w/m2) ?
Some experience ? Sensors, how to connect and etc... ?
Thank

mra2ko

Thank to all ! I test some board and post here results...

mra2ko

All the boards I found have LAN 8710A, realy you think 7810 ?
Thank

mra2ko

Thank to fast reply !
FW/SW is the same for other boards or ?

mra2ko

Hi,
which board to use ESP easy for LAN cable connection, no over wifi... I would like connect some sensors over cable.
Thank !

mra2ko

Problem solved. I dont know why, but I had to recalibrate 2x. Afther them work fine. The sensor was never used again
Thank to all!

mra2ko

Sensor is connected on short cables 10cm, direct to D1 mini to TX/RX pins, VCC is 5V Yes, if I breathe on the sensor, the value changes, but after 10s. But in normal conditions in the room is around 410 which is nonsense. 303718: MHZ19: PPM value: 395 Temp/S/U values: 21/0/0.00 304689: MHZ19: PPM va...

mra2ko

Hi,
I use ESP Easy Mega (ESP_Easy_mega_20211105_normal_ESP8266_4M1M Nov 5 2021) and have connectet MH-Z19. Data count, but I have still aroud 400.
What is the exact calibration procedure ?

I test disable abc, get outside, connect HD to GND and still have around 400 inside and outisde too :/

Thak

Search found 85 matches

Re: Lora/TTN RN2483

Re: Lora/TTN RN2483

Re: Lora/TTN RN2483

Re: Lora/TTN RN2483

Re: Lora/TTN RN2483

Re: Lora/TTN RN2483

Re: Lora/TTN RN2483

Lora/TTN RN2483

Time scheduler for GPIO

Re: HX711

Re: HX711

Re: HX711

Re: HX711

Re: Project: LORA solar sensor

Project: LORA solar sensor

Re: HX711

HX711

Re: Measuring ambient sound outside

Re: Measuring ambient sound outside

Measuring ambient sound outside

Re: Sonoff basic R2 V1.3

Re: Sonoff basic R2 V1.3

Sonoff basic R2 V1.3

Re: Witch hardware platform for ESP Easy Lora TTN ?

Re: Witch hardware platform for ESP Easy Lora TTN ?

Witch hardware platform for ESP Easy Lora TTN ?

Re: ESP Easy Mega measure Wind speed and direct / Ozone / UV index / Solar light

ESP Easy Mega measure Wind speed and direct / Ozone / UV index / Solar light

Re: ESP Easy Mega - LAN connect ?

Re: ESP Easy Mega - LAN connect ?

Re: ESP Easy Mega - LAN connect ?

ESP Easy Mega - LAN connect ?

Re: MH-Z19

Re: MH-Z19

MH-Z19