I see
Moring
instead of
Morning
Search found 307 matches
- 19 Dec 2018, 14:04
- Forum: ESP Easy: Software
- Topic: Chicken door and light
- Replies: 14
- Views: 7100
- 17 Dec 2018, 22:34
- Forum: ESP Easy: General Discussion
- Topic: not connecting to Router ?
- Replies: 11
- Views: 5905
Re: not connecting to Router ?
Same here on WIN7:
https://github.com/Grovkillen/ESP_Easy_Flasher/issues/8
... but ... works on Win Vista
Reported earlier:COM port is already in use. Cannot proceed.
https://github.com/Grovkillen/ESP_Easy_Flasher/issues/8
... but ... works on Win Vista
- 15 Dec 2018, 21:43
- Forum: ESP Easy: Hardware
- Topic: sensor - hw-611 e/p 280
- Replies: 6
- Views: 17423
Re: sensor - hw-611 e/p 280
Make sure you have Bosch chip marking BME280 ??? U?
and NOT BMP280 Bosch chip marking ??? K?
The difference is the U or K marking.
and NOT BMP280 Bosch chip marking ??? K?
The difference is the U or K marking.
- 12 Dec 2018, 10:56
- Forum: ESP Easy: Software
- Topic: Relay state survival upon ESPeasy cold reboot
- Replies: 2
- Views: 2017
Re: Relay state survival upon ESPeasy cold reboot
@ouinouin
Choose a Latching relay, it's state will survive a power-down/reboot.
Reading the wiki gives a lot of inspiration.
See f.i. Rules:
https://www.letscontrolit.com/wiki/inde ... rial_Rules
Toggle seems to be supported:
https://github.com/letscontrolit/ESPEasy/pull/1733
Choose a Latching relay, it's state will survive a power-down/reboot.
Reading the wiki gives a lot of inspiration.
See f.i. Rules:
https://www.letscontrolit.com/wiki/inde ... rial_Rules
Toggle seems to be supported:
https://github.com/letscontrolit/ESPEasy/pull/1733
- 10 Dec 2018, 23:51
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy P1 wifi gateway GPIO Idx
- Replies: 38
- Views: 50880
Re: ESPEasy P1 wifi gateway GPIO Idx
Good find Rob!
- 10 Dec 2018, 22:11
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy P1 wifi gateway GPIO Idx
- Replies: 38
- Views: 50880
Re: ESPEasy P1 wifi gateway GPIO Idx
Can I program something with lua or DZVents?
Yes you can
Yes you can
- 09 Dec 2018, 23:19
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy P1 wifi gateway GPIO Idx
- Replies: 38
- Views: 50880
Re: ESPEasy P1 wifi gateway GPIO Idx
When I measure with my oscilloscope on point (2) and (3) I see every second a burst of ones and zeros. At point (3) it's inverted. Good! Where do I set the Serial log level to 0? ESP Easy, Tools, Advanced, Serial log level Check Domoticz tab Devices, filter on P1, you should see 2 devices: Energy a...
- 09 Dec 2018, 10:13
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy P1 wifi gateway GPIO Idx
- Replies: 38
- Views: 50880
Re: ESPEasy P1 wifi gateway GPIO Idx
Here v2.0.0-dev12 running Looks the same as your P1_1.png P1 connected to Rx Set Serial log level to 0 No IDX needed for Domoticz (if you use that??) TCP Port 8088 Create "P1 Smart Meter with LAN interface" in the HW interface of Domoticz TCP Port 8088 I use this connection diagram P1 smar...
- 09 Dec 2018, 01:37
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy P1 wifi gateway GPIO Idx
- Replies: 38
- Views: 50880
Re: ESPEasy P1 wifi gateway GPIO Idx
Suggestion to poster: what version ?
Suggestion to Dev's: Show version in white area of the header.
Suggestion to Dev's: Show version in white area of the header.
- 08 Dec 2018, 00:26
- Forum: ESP Easy: Hardware
- Topic: Dealing with unsupported I2C sensors
- Replies: 3
- Views: 3046
Re: Dealing with unsupported I2C sensors
My comment was regarding:
I have no idea about unsupported sensors.
and explained that port is not the number you see in the scan, but an offset to a standard number.I've tried the MLX90614 IR temperature sensor using the correct port (64), but that doesn't work.
I have no idea about unsupported sensors.
- 07 Dec 2018, 20:34
- Forum: ESP Easy: Hardware
- Topic: Dealing with unsupported I2C sensors
- Replies: 3
- Views: 3046
Re: Dealing with unsupported I2C sensors
The GY-906 MLX90614 IR temperature is working fine here. Standard port is 0x5A. The port number in the GUI is an offset on 0x5A. So keep it zero if I2C address is 0x5A. Don't understand your 60 ... Decimal ? Hex? If it is 0x60 (thus hex) you need an offset of 6. Fill the port number in the GUI with 6.
- 06 Dec 2018, 21:26
- Forum: ESP Easy: General Discussion
- Topic: Issue connecting ESP_Easy_0 SSID
- Replies: 5
- Views: 4774
Re: Issue connecting ESP_Easy_0 SSID
See:Look at serial monitor. You can give ssid and password manually
https://www.letscontrolit.com/wiki/inde ... _Reference
- 06 Dec 2018, 15:54
- Forum: ESP Easy: Software
- Topic: send temperature of ESP1 to ESP2
- Replies: 12
- Views: 8845
Re: send temperature of ESP1 to ESP2
but i need to create a task where i have empty value or not? Just leave it empty (no manual task creation). Task creation is done by SW. Both units need a restart. But there are more problems with inter-ESP connections, see https://github.com/letscontrolit/ESPEasy/issues/1998 Yes, use an old versio...
- 06 Dec 2018, 13:06
- Forum: ESP Easy: Software
- Topic: send temperature of ESP1 to ESP2
- Replies: 12
- Views: 8845
Re: send temperature of ESP1 to ESP2
No values in the Task overview is NOT OK.
Last thing I could suggest is, use a lower UDP port number, something like 2540 (on all units!!)
It could be, that this functionality is broken by the WiFi modification since around May.
The last version that I used to test it, was ESPEasy_v2.0.0-dev7
Last thing I could suggest is, use a lower UDP port number, something like 2540 (on all units!!)
It could be, that this functionality is broken by the WiFi modification since around May.
The last version that I used to test it, was ESPEasy_v2.0.0-dev7
- 06 Dec 2018, 10:48
- Forum: ESP Easy: Software
- Topic: send temperature of ESP1 to ESP2
- Replies: 12
- Views: 8845
Re: send temperature of ESP1 to ESP2
Is ...
esp195, task3 "filled" by the system ? It should ..
esp198, task2 "filled" by the system ? It should ..
You should see values in the Task overview
Or ...
UDP port blocked by the router?
esp195, task3 "filled" by the system ? It should ..
esp198, task2 "filled" by the system ? It should ..
You should see values in the Task overview
Or ...
UDP port blocked by the router?
- 05 Dec 2018, 23:23
- Forum: ESP Easy: General Discussion
- Topic: self compiling: 'Goto_Rules_Root' was not declared
- Replies: 15
- Views: 10172
- 05 Dec 2018, 23:03
- Forum: ESP Easy: Software
- Topic: send temperature of ESP1 to ESP2
- Replies: 12
- Views: 8845
Re: send temperature of ESP1 to ESP2
If I remember correctly:
- Use unique names like dht22_198 and dht_195
- Use Task 2 on 198 for dht22_198, leave Task 2 empty on 195
- Use Task 3 on 195 for dht_195 and leave Task 3 empty on 198
Then you can display [dht22_198#Temperature] and [dht22_195#Temperature]
- Use unique names like dht22_198 and dht_195
- Use Task 2 on 198 for dht22_198, leave Task 2 empty on 195
- Use Task 3 on 195 for dht_195 and leave Task 3 empty on 198
Then you can display [dht22_198#Temperature] and [dht22_195#Temperature]
- 04 Dec 2018, 13:04
- Forum: ESP Easy: General Discussion
- Topic: a question about display varabiles
- Replies: 7
- Views: 3939
Re: a question about display varabiles
Understood.
Thanks
Thanks
- 04 Dec 2018, 08:40
- Forum: ESP Easy: General Discussion
- Topic: a question about display varabiles
- Replies: 7
- Views: 3939
Re: a question about display varabiles
@grovkillen
I tried on mega-20181128 normal:
But there degreeC and degree_C did not work.
But ... {D} ...does work.
Something to document ? ... Or change ..?
I tried on mega-20181128 normal:
on the LCDDisplay LCD2004 module (Plugin12),[Temperature#Celsius]degreeC
But there degreeC and degree_C did not work.
But ... {D} ...does work.
Something to document ? ... Or change ..?
- 01 Dec 2018, 18:14
- Forum: ESP Easy: Hardware
- Topic: Connect to other controllers.
- Replies: 18
- Views: 7891
Re: Connect to other controllers.
@Lerik,
you could start reading the Wiki first ...
https://www.letscontrolit.com/wiki/inde ... le=ESPEasy
you could start reading the Wiki first ...
https://www.letscontrolit.com/wiki/inde ... le=ESPEasy
- 29 Nov 2018, 10:18
- Forum: ESP Easy: Software
- Topic: General Pulse counting to much
- Replies: 8
- Views: 5551
Re: General Pulse counting to much
Yep, I understand.the pulse led match 100% with the rotating disk
But that does not mean that the ESP does not get more pulses ....
ESP could see additional spikes ...
Saw your scheme on Github, but that tool limits you in your expression.
Advise ... use PPT to make a logic scheme.
- 28 Nov 2018, 23:40
- Forum: ESP Easy: Software
- Topic: General Pulse counting to much
- Replies: 8
- Views: 5551
Re: General Pulse counting to much
I compared the Domoticz result (including off-set) with the real meter. Still correct. Could it something with time and samples? I use: Name: Flow GPIO-12(D6) Debounce 0 Counter Delta Mode Type Rising Interval 60 seconds !!!!!! (measure Liter/minute) Count: 0 decimals Total: 1 decimal Time: 2 decim...
- 28 Nov 2018, 22:03
- Forum: ESP Easy: Projects / Applications
- Topic: [solved] ESP8266(ESP-12E) et DS18B20 error
- Replies: 13
- Views: 17388
Re: ESP8266(ESP-12E) et DS18B20 error
Top
You can close the subject
You can close the subject
- 28 Nov 2018, 18:25
- Forum: ESP Easy: Software
- Topic: General Pulse counting to much
- Replies: 8
- Views: 5551
Re: General Pulse counting to much
Yep, that is strange !
I did not tested it, in that way.
I compared the Domoticz result (including off-set) with the real meter.
That was correct one weak ago ...
Saw your #2103 github
I did not tested it, in that way.
I compared the Domoticz result (including off-set) with the real meter.
That was correct one weak ago ...
Saw your #2103 github
- 28 Nov 2018, 17:01
- Forum: ESP Easy: Projects / Applications
- Topic: [solved] ESP8266(ESP-12E) et DS18B20 error
- Replies: 13
- Views: 17388
Re: ESP8266(ESP-12E) et DS18B20 error
Your board is not a Wemos, but a clone. It has a a 4A2D voltage convertor (150mA) some work, some don't. https://images-na.ssl-images-amazon.com/images/I/814nuTk1uaL._SL1500_.jpg There seems to be good and bad suppliers from that chip. I also recently experienced problems with a batch of #5 DS1B20 S...
- 28 Nov 2018, 16:51
- Forum: ESP Easy: Software
- Topic: General Pulse counting to much
- Replies: 8
- Views: 5551
Re: General Pulse counting to much
Sounds like a missing Pull-Up /Pull-Down resistor.
What type of NPN sensor?
6V, 12V, 5V ?
Level convertor?
What GPIO?
Here a trouble free solution for LJ12A3-4-Z/BX-5V
https://www.letscontrolit.com/forum/vie ... 232#p32473
What type of NPN sensor?
6V, 12V, 5V ?
Level convertor?
What GPIO?
Here a trouble free solution for LJ12A3-4-Z/BX-5V
https://www.letscontrolit.com/forum/vie ... 232#p32473
- 27 Nov 2018, 15:55
- Forum: ESP Easy: Projects / Applications
- Topic: [solved] ESP8266(ESP-12E) et DS18B20 error
- Replies: 13
- Views: 17388
Re: ESP8266(ESP-12E) et DS18B20 error
D4=GPIO2 is a more complicated port, used at boot (has internal Pull-Up) Try to start with simple ports that should work: D5=GPIO14 or D6=GPIO12 or D7=GPIO13 There are a number of problems reported with "fake" Wemos D1 mini's and the 5V to 3V3 conversion (minimalistic design). Make sure yo...
- 22 Nov 2018, 01:42
- Forum: ESP Easy: Software
- Topic: DS18B20 configuration webpage issues
- Replies: 5
- Views: 4401
Re: DS18B20 configuration webpage issues
Yes, I recognize this. But first: the latest built the latest built is a forbidden word, .. useless text, ...without information. Almost every day there is a new release. Be precise! The symptoms look like a DS18B20 in parasite mode, that could be caused by a bad Vcc or Gnd connection. Also make sur...
- 21 Nov 2018, 16:51
- Forum: Staff Announcements forum
- Topic: Reference project for the upcoming homepage
- Replies: 28
- Views: 45892
Re: Reference project for the upcoming homepage
Maybe the Dallas plugin could handle up to 4 DS18B20 units? If say that something like that would be more logic than adding more tasks. That implies also 4 IDX'en per task to get the data to a controller. #20 DS18B20 sensors would cost only 5 tasks! It would also solve the limitation of the new ext...
- 20 Nov 2018, 23:34
- Forum: Staff Announcements forum
- Topic: Reference project for the upcoming homepage
- Replies: 28
- Views: 45892
Re: Reference project for the upcoming homepage
@grovkillen This possible reference project: https://www.letscontrolit.com/forum/viewtopic.php?f=14&t=5978#p32739 is now impossible to build, It needs at least 20 tasks. https://github.com/letscontrolit/ESPEasy/issues/590#issuecomment-432168958 We will not make an official release for more than ...
- 19 Nov 2018, 19:41
- Forum: ESP Easy: General Discussion
- Topic: LED (4x20) Unable to Define & Save Device Lines 1-4
- Replies: 5
- Views: 3658
Re: LED (4x20) Unable to Define & Save Device Lines 1-4
Should be avail. tomorrow
Thanks to TD-er!
Thanks to TD-er!
- 19 Nov 2018, 18:07
- Forum: ESP Easy: Software
- Topic: In search for more than 12 tasks / devices
- Replies: 8
- Views: 6103
Re: In search for more than 12 tasks / devices
See https://www.letscontrolit.com/forum/vie ... 723#p22408
But ...
https://github.com/letscontrolit/ESPEas ... -344511468
is closed ... 27 day ago
But ...
https://github.com/letscontrolit/ESPEas ... -344511468
is closed ... 27 day ago
- 19 Nov 2018, 10:10
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16998
IR Floor thermostat with rotary encoder adjustment
IR Floor thermostat with rotary encoder adjustment (first impression) IR sensor: GY-906 MLX90614ESF-BAA (opening 45 degrees) This thermostat operates between a maximum Air temperature and a minimum Floor temperature. f.i. "keep the floor at 24C while the air is below 22C" No complicated PI...
- 19 Nov 2018, 10:09
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16998
Water measurement with inductive proximity sensor switch NPN NO LJ12A3-4-Z/BX-5V
Incoming fresh water measurement with inductive proximity sensor switch NPN NO LJ12A3-4-Z/BX-5V Make sure you have the 5V version ! Then it can be connected via a standard level converter. To mount the NO LJ12A3-4-Z/BX-5V, I have used a scrap piece of Acryl/Acrylic. Drilled a hole and used a heater ...
- 19 Nov 2018, 09:52
- Forum: ESP Easy: General Discussion
- Topic: LED (4x20) Unable to Define & Save Device Lines 1-4
- Replies: 5
- Views: 3658
Re: LED (4x20) Unable to Define & Save Device Lines 1-4
Same here
ESP_Easy_mega-20181101 LCD is working
ESP_Easy_mega-20181117 LCD is NOT working
See Github https://github.com/letscontrolit/ESPEasy/issues/2063
ESP_Easy_mega-20181101 LCD is working
ESP_Easy_mega-20181117 LCD is NOT working
See Github https://github.com/letscontrolit/ESPEasy/issues/2063
- 15 Nov 2018, 01:06
- Forum: ESP Easy: Software
- Topic: Sliding average dummy device
- Replies: 6
- Views: 6814
Re: Sliding average dummy device
Not a real moving average (FIFO), but an approximation. Simplified (understandable) version of my hourly and daily temperature averaging. (with thanks to my '80 teacher Digital Filtering, Prof. Dr. Hermann, of the University Twente) Assumption: 1 sample per 10 min Hour filter length=6 Define a Dummy...
- 13 Nov 2018, 20:20
- Forum: ESP Easy: General Discussion
- Topic: Button to toggle RGB leds
- Replies: 13
- Views: 8813
Re: Button to toggle RGB leds
Using mega-20181101
this part of my rules works !
Is using ( ....) these brackets the trick?
this part of my rules works !
Code: Select all
TaskvalueSet,3,2,([MUC19NAN#MUC19_NAN]+[rot#counter]/10)
- 12 Nov 2018, 23:32
- Forum: ESP Easy: Hardware
- Topic: Relais plus HCS04
- Replies: 2
- Views: 2248
Re: Relais plus HCS04
On a 1 line question?or hint?
Here is a hint: description/version/GPIO's in use/Screenshot/connections/ESP type/Relay type/Rules
- 10 Nov 2018, 10:00
- Forum: ESP Easy: Projects / Applications
- Topic: espeasy + domoticz to dimmer light
- Replies: 7
- Views: 9682
Re: espeasy + domoticz to dimmer light
Looks very professional ..Meek.
- 09 Nov 2018, 23:40
- Forum: ESP Easy: Hardware
- Topic: Rotary encoder push button question
- Replies: 9
- Views: 5767
Re: Rotary encoder push button question
Ok. That make sense. I have no "I" marking but "SW" marking. Switching Off/On de encoder does not reset the values of the encoder task. "Miss-use" of TaskValueSet,<nr>,1,0 does show zero on display, but .. A forced TaskRun gives the original value. Or a next turn is an ...
- 09 Nov 2018, 13:38
- Forum: ESP Easy: Projects / Applications
- Topic: Reading Gas meter
- Replies: 9
- Views: 7411
Re: Reading Gas meter
I see 1 pulse =10 dm3
Is this reader an option?
https://www.letscontrolit.com/wiki/index.php/TCR5000
Is this reader an option?
https://www.letscontrolit.com/wiki/index.php/TCR5000
- 09 Nov 2018, 13:34
- Forum: ESP Easy: Hardware
- Topic: Rotary encoder push button question
- Replies: 9
- Views: 5767
Re: Rotary encoder push button question
Yep, the task shows 1, active 0.
Or inverted 0, active 1.
So the button works.
Same GPIO is used in the Encoder task.
Or inverted 0, active 1.
So the button works.
Same GPIO is used in the Encoder task.
- 09 Nov 2018, 11:24
- Forum: ESP Easy: Hardware
- Topic: Rotary encoder push button question
- Replies: 9
- Views: 5767
Re: Rotary encoder push button question
Not pushed is High, a weak high, so it needs a pull-up (if not on the module, see picture, edit of first post)
Pushed is Low.
Button is OK
Pushed is Low.
Button is OK
- 08 Nov 2018, 18:12
- Forum: ESP Easy: Hardware
- Topic: Rotary encoder push button question
- Replies: 9
- Views: 5767
Re: Rotary encoder push button question
Thanks grovkillen. I created a new additional Push task connected to GPIO13 with Pull-Up. I filled as 3rd GPIO in the Rotary encoder also the GPIO13. Rebooted. No luck ! Pushed or not pushed, also when rotating, no Zero. Inverted the Push task. Rebooted. No luck ! Pushed or not pushed, also when rot...
- 08 Nov 2018, 17:57
- Forum: ESP Easy: Software
- Topic: [solved] Error: Either fill all IP settings fields or leave all empty
- Replies: 2
- Views: 2215
Re: Error: Either fill all IP settings fields or leave all empty
Take a look at the Config page.
Some elements are missing there.
Some elements are missing there.
- 08 Nov 2018, 12:36
- Forum: ESP Easy: Hardware
- Topic: Rotary encoder push button question
- Replies: 9
- Views: 5767
Rotary encoder push button question
Talking about this one https://www.letscontrolit.com/wiki/images/thumb/c/cb/Rotary_encoder_001.jpg/520px-Rotary_encoder_001.jpg The Wiki: https://www.letscontrolit.com/wiki/index.php/Rotary_Encoder To enable the switch input (press the knob) you need to set this as a generic switch input and connect...
- 05 Nov 2018, 23:23
- Forum: ESP Easy: Software
- Topic: prevent a timer restart before expiration
- Replies: 4
- Views: 2745
Re: prevent a timer restart before expiration
[you replied while i was typing, anyhow....] Assuming you are using RCWL-0516. connect RCWL-0516 CDS (Enable) to GPIO 15 (D8). GPIO 15 (D8) is special for the boot sequence but can be used without pull-up! On System#Boot do GPIO,15,1 //Enable RCWL-0516 Endon On Radar#send=1 do timerset,1,10 GPIO,5,1...
- 04 Nov 2018, 19:51
- Forum: ESP Easy: Hardware
- Topic: HC-SR501 PIR - stop false positives?
- Replies: 47
- Views: 100891
Re: HC-SR501 PIR - stop false positives?
André,
do you have a triple-screen presentation for this?
Regards
Domosapiens
do you have a triple-screen presentation for this?
Regards
Domosapiens
- 02 Nov 2018, 15:08
- Forum: ESP Easy: Software
- Topic: 1 JSN-SR04t publish two Values
- Replies: 2
- Views: 2097
Re: 1 JSN-SR04t publish two Values
You can calculate in rules,
write the value to a Generic Dummy Device (known as TaskValueSet #Task in the rules)
and display that Dummy Device value.
see:
https://www.letscontrolit.com/wiki/inde ... rial_Rules
write the value to a Generic Dummy Device (known as TaskValueSet #Task in the rules)
and display that Dummy Device value.
see:
https://www.letscontrolit.com/wiki/inde ... rial_Rules
- 01 Nov 2018, 15:45
- Forum: ESP Easy: General Discussion
- Topic: newbie 18b20 code practise
- Replies: 2
- Views: 2153