Search found 190 matches
- 17 Apr 2019, 20:32
- Forum: ESP Easy: Software
- Topic: What can users do to make ESPEasy more attractive.
- Replies: 16
- Views: 11016
Re: OTA updates on 1MB devices
@grovkillen I think, you need some stable relase. And I do not mean old and slow Rxxx relases. Each mega brings something new, but looses something different, what works fine before. I found some latest v2.0 version, which is compromise for me. Then are still changes And what works fine, for example...
- 14 Apr 2019, 22:24
- Forum: ESP Easy: General Discussion
- Topic: How to wake from deep sleep
- Replies: 7
- Views: 6782
Re: How to wake from deep sleep
When postman put something to your box you must generate short ground pulse on reset pin to boot your ESP.
- 04 Apr 2019, 20:51
- Forum: ESP Easy: General Discussion
- Topic: lcd2004 with big fonts option available?
- Replies: 2
- Views: 2779
Re: lcd2004 with big fonts option available?
LCD2004 is character oriented display. Each character is 8x5 dots with space between characters and lines too. Characters are stored in displays ROM and called by ASCII code. But you can define 8 characters by own and stored then in displays RAM. So you can create something like this: DSC_0533.jpg Y...
- 28 Mar 2019, 09:54
- Forum: ESP Easy: Projects / Applications
- Topic: Relay
- Replies: 8
- Views: 6220
Re: Relay
Do you realize that the event relay#rele is only executed when the relay status changes? How do you do that? In some other part of the program? If not, this event will never happen and cannot work.
- 26 Mar 2019, 19:58
- Forum: ESP Easy: Projects / Applications
- Topic: Relay
- Replies: 8
- Views: 6220
Re: Relay
Nice, but still -what is relay#rele ? I can see only rele#rele in your last picture. And on new firmwares, checking relay status by defining input on the same pin is problematic. I am using it, but on older versions _dev13 and v2.0 And you are using event: When toggle relay (change its status - but ...
- 26 Mar 2019, 19:50
- Forum: ESP Easy: General Discussion
- Topic: Sonoff Basic and latest versions of ESP firmware
- Replies: 6
- Views: 5730
Re: Sonoff Basic and latest versions of ESP firmware
My Sonoff Basic:
ESPeasy is in AP mode ( and without internet connection of course )
You must connect to it ( 192.168.4.1 ) and set your wifi network SSID and password.
I think message " ESP_Easy_0, connected, no internet" is correct.ESPeasy is in AP mode ( and without internet connection of course )
You must connect to it ( 192.168.4.1 ) and set your wifi network SSID and password.
- 24 Mar 2019, 23:34
- Forum: ESP Easy: Software
- Topic: Newbie ESPEasy to Grafana Question
- Replies: 16
- Views: 17676
- 20 Mar 2019, 23:24
- Forum: ESP Easy: Software
- Topic: Feature request - SendtoHTTP authentication
- Replies: 6
- Views: 8923
- 20 Mar 2019, 23:19
- Forum: ESP Easy: Software
- Topic: Rules not working and "how to send data to 3rd party"
- Replies: 7
- Views: 5668
Re: Rules not working and "how to send data to 3rd party"
Authorization When using some method other than a browser to connect to Domoticz it may be necessary to do Authorization differently. Authorization over HTTP is done by setting the "Authorization" HTTP request header when sending the request to Domoticz. The value of this header is a base6...
- 20 Mar 2019, 23:15
- Forum: ESP Easy: Software
- Topic: Rules not working and "how to send data to 3rd party"
- Replies: 7
- Views: 5668
Re: Rules not working and "how to send data to 3rd party"
I am using password for Domoticz for connections from outside Internet ( WLAN ). But setting it to no required password from my local network. ( LAN ) And what problem is with airsensor? I think /json.htm?type=command¶m=udevice&idx=IDX&nvalue=[ your_dummy_variable_for PPM ] Must work...
- 17 Mar 2019, 20:45
- Forum: ESP Easy: General Discussion
- Topic: Interacting with Domoticz
- Replies: 2
- Views: 3056
Re: Interacting with Domoticz
Create dummy switch in Domoticz and take note about its IDX In rules on ESPeasy use something like this: SendToHTTP 192.168.1.253,8080,/json.htm?type=command¶m=switchlight&idx=26&switchcmd=On or SendToHTTP 192.168.1.253,8080,/json.htm?type=command¶m=switchlight&idx=26&...
- 16 Mar 2019, 10:05
- Forum: ESP Easy: General Discussion
- Topic: TIMEout while reading input data!
- Replies: 3
- Views: 2767
Re: TIMEout while reading input data!
Try this: Instead of syntax like this: SendToHTTP 192.168.0.243,8080,/json.htm?type=command¶m=switchlight&idx=174&switchcmd=On Many users have reported problems with commands being truncated, particularly when trying to send commands to Domoticz. It seems to be a parsing error. There...
- 15 Mar 2019, 23:12
- Forum: ESP Easy: General Discussion
- Topic: Rules on mega version problem
- Replies: 3
- Views: 2491
Re: Rules on mega version problem
I remove it, but result is the same.
I think - it is very simple rules and I do not understand why it not works on mega version.
I think - it is very simple rules and I do not understand why it not works on mega version.
- 14 Mar 2019, 22:17
- Forum: ESP Easy: General Discussion
- Topic: Rules on mega version problem
- Replies: 3
- Views: 2491
Rules on mega version problem
Can somebody check my rules, which not works on mega version firmware please. I am normally using v2.0 version firmware for my floor heating controller. Rules have got about 1900 characters and all works fine. If I try new mega versions no "if" statements works. I "strip" down th...
- 14 Mar 2019, 14:17
- Forum: ESP Easy: Projects / Applications
- Topic: ESP Pulse counter and wrong values in Domoticz
- Replies: 1
- Views: 2768
Re: ESP Pulse counter and wrong values in Domoticz
Domoticz has got some problems counting energy consumption. My first sensor version sends actual watts to Domoticz and lets Domoticz calculate energy consumption. But Domoticz always forgot last 5 min in hour interval. Now I am using universal counter incremental in Domoticz and send every minute ac...
- 09 Mar 2019, 19:51
- Forum: ESP Easy: General Discussion
- Topic: Problem store rules on last mega version
- Replies: 5
- Views: 3861
Re: Problem store rules on last mega version
Sorry, I left it marked "private".
Now corrected and link works.
Now corrected and link works.
- 09 Mar 2019, 18:08
- Forum: ESP Easy: General Discussion
- Topic: Problem store rules on last mega version
- Replies: 5
- Views: 3861
Problem store rules on last mega version
I use the latest version of V2.0, but from time to time I'm trying to check if my rules will work on the current version of the mega firmware. Unfortunately, what works correctly on v2.0 does not work on the mega version. Today, however, I have found that I can not even save the rules from my versio...
- 08 Mar 2019, 09:56
- Forum: ESP Easy: General Discussion
- Topic: Problems with event call in rules ?
- Replies: 5
- Views: 4080
Re: Problems with event call in rules ?
What is:
DoAction=25
And I am not sure, if your event call method is correct:
Calling event with value assigned.
event DoDown=%eventvalue%
DoAction=25
And I am not sure, if your event call method is correct:
Calling event with value assigned.
event DoDown=%eventvalue%
- 07 Mar 2019, 17:55
- Forum: ESP Easy: Hardware
- Topic: Can't flash my POW R2
- Replies: 3
- Views: 2739
- 04 Mar 2019, 10:56
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy on ShellyV1
- Replies: 9
- Views: 11405
Re: ESPEasy on ShellyV1
rele#Switch is defined as input for the same gpio like relay ( gpio12 ) So this switch reflect actual state of relay and can be checked by if statement. But I am using old v2.0-20180322 version. Maybe in some "mega" versions this feature not works. Something like this was mentioned in this...
- 03 Mar 2019, 22:35
- Forum: ESP Easy: Hardware
- Topic: Fingerprint sensor FPM10A with ESPeasy?
- Replies: 1
- Views: 2363
Re: Fingerprint sensor FPM10A with ESPeasy?
Put Arduino between fingerprintsensor and ESPeasy. Arduino through available library decides whether the fingerprint is valid, and send event "valid" to ESPeasy. Or you can define events: carol_valid peter_valid linda_valid If you need distinguish users. You can simply send these command v...
- 03 Mar 2019, 22:30
- Forum: ESP Easy: Hardware
- Topic: Blitzwolf BW-SHP6
- Replies: 16
- Views: 31484
Re: Blitzwolf BW-SHP6
@Wiki You can use normal ESP8285 bin file. Configuration fot Blitz is described in TAsmota wiki: GPIO_LED2_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_LED1_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status GPIO_USER, // GPIO0...
- 03 Mar 2019, 22:13
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy on ShellyV1
- Replies: 9
- Views: 11405
Re: ESPEasy on ShellyV1
I do not know FHEM, I am using Domoticz. But You can create events "lamp_on" and lamp_off" which received from FHEM will switch relay. And back report relay state to FHEM: Some example with Domoticz: on lamp_on do // this event from Domoticz will switch relay ON gpio,12,1 gpio,13,0 en...
- 03 Mar 2019, 22:00
- Forum: ESP Easy: General Discussion
- Topic: MCP23017 question
- Replies: 14
- Views: 9720
Re: MCP23017 question
You can use this motor PWM like DA converter for convert digi to analog via i2c:
https://www.letscontrolit.com/wiki/inde ... 2#Hardware
So by TB 6612
https://www.letscontrolit.com/wiki/inde ... 2#Hardware
So by TB 6612
- 28 Feb 2019, 22:25
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy and Sonoff TH16 - crash every 2 days
- Replies: 5
- Views: 4269
Re: ESP Easy and Sonoff TH16 - crash every 2 days
@aneo I am using them for el. floor heating too. I send actual setpoint value, mode of control, outdoor temperature and others every minute from Domoticz to all ESP regulators. ESP boot with some safe settings and within minute obtain correct values and works. I am now changing my Wemos nodes to Son...
- 28 Feb 2019, 13:52
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy and Sonoff TH16 - crash every 2 days
- Replies: 5
- Views: 4269
Re: ESP Easy and Sonoff TH16 - crash every 2 days
My Wemos D1 with DS18B20 reboots randomly in hours or days interval too.
So I send configuration periodically from Domoticz, to set correct values after reboot.
_dev13 and v2.0 too.
I have number of them on one power bus and they reboot independently, so I think it is not power issue.
So I send configuration periodically from Domoticz, to set correct values after reboot.
_dev13 and v2.0 too.
I have number of them on one power bus and they reboot independently, so I think it is not power issue.
- 26 Feb 2019, 12:04
- Forum: ESP Easy: Software
- Topic: How to read an IO pin state in rules ?
- Replies: 4
- Views: 6669
Re: How to read an IO pin state in rules ?
You can assign input switch to your gpio12 and than tested its state.
Like at this example:
viewtopic.php?p=33716#p33716
But using events, like grovkillen wrote, is better way.
Like at this example:
viewtopic.php?p=33716#p33716
But using events, like grovkillen wrote, is better way.
- 24 Feb 2019, 14:56
- Forum: ESP Easy: Software
- Topic: Serial Gateway between Arduino Board and ESP
- Replies: 2
- Views: 2292
- 24 Feb 2019, 13:11
- Forum: ESP Easy: Projects / Applications
- Topic: Seria Server - Ser2Net wiki?
- Replies: 13
- Views: 12126
Re: Seria Server - Ser2Net wiki?
Look here: https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference You can send command by serial line from Arduino to ESPeasy. Create dummy device in ESPeasy - for example like me in task 12: 2019-02-24-130221_1920x1080_scrot.png From arduino send string: TaskValueSet,12,1,<your_valu...
- 12 Feb 2019, 21:10
- Forum: ESP Easy: Software
- Topic: Update button state from Node-Red
- Replies: 10
- Views: 8656
Re: Update button state from Node-Red
I think I'm using the same configuration just instead of MQTT using http and Domoticz. The original state was a switch in the wall. I replaced it by Sonoff Basic, which switches the lamp and the original switch is replaced by a button switch ( but you can use original switch ) connected to Gpio on t...
- 12 Feb 2019, 21:01
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] Problems getting ESPEasy configured - unresponsive after reboot
- Replies: 7
- Views: 5834
Re: Problems getting ESPEasy configured - unresponsive after reboot
Try without --flash_mode DOUT , like me.
- 12 Feb 2019, 19:13
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] Problems getting ESPEasy configured - unresponsive after reboot
- Replies: 7
- Views: 5834
Re: Problems getting ESPEasy configured - unresponsive after reboot
My way to program Sonoffs: To check comunication: esptool.py --port /dev/ttyUSB0 flash_id Erase flash: esptool.py --port /dev/ttyUSB0 erase_flash Program ESPeasy bin: esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash 0x00000 ESP_Easy_v2.0-20180322_normal_ESP8285_1024.bin Repower Sonoff and co...
- 11 Feb 2019, 19:56
- Forum: ESP Easy: Hardware
- Topic: Deep Sleep issue
- Replies: 1
- Views: 1760
Re: Deep Sleep issue
Try V2..0 firmware. It Is half way between R147 and mega. But more stable than mega for me.
- 07 Feb 2019, 23:09
- Forum: ESP Easy: General Discussion
- Topic: Get data sent by data-push (http) in domoticz
- Replies: 4
- Views: 4059
- 07 Feb 2019, 12:14
- Forum: ESP Easy: General Discussion
- Topic: Get data sent by data-push (http) in domoticz
- Replies: 4
- Views: 4059
Re: Get data sent by data-push (http) in domoticz
Yes, It is possible. I am sending outdoor temperature to my heating control nodes for example. For inspiration part of my Dzvents script, which I call every minute: --Outdoor local outdoor = domoticz.devices('Outdoor') -- Kacka local urlHDO = 'http://192.168.1.102/control?cmd=event,Outdoor='..(outdo...
- 06 Feb 2019, 18:37
- Forum: ESP Easy: Hardware
- Topic: DS18B20 setup to ignore Extreme data
- Replies: 7
- Views: 6283
Re: DS18B20 setup to ignore Extreme data
The bad value is most likely as 85, exceptionally 0.
So send with rules and ignore the value of 85.
Even in the room or outdoors, such temperature does not often occur.
So send with rules and ignore the value of 85.
Even in the room or outdoors, such temperature does not often occur.
- 06 Feb 2019, 18:31
- Forum: ESP Easy: Software
- Topic: Serial port
- Replies: 3
- Views: 3924
Re: Serial port
(1)
I think data extraction will be difficult.
Is not it better to send data in a correct format?:
viewtopic.php?t=4884
(2)
serialsend
Look at post from "mikeluyten" here:
https://github.com/letscontrolit/ESPEasy/issues/539
I think data extraction will be difficult.
Is not it better to send data in a correct format?:
viewtopic.php?t=4884
(2)
serialsend
Look at post from "mikeluyten" here:
https://github.com/letscontrolit/ESPEasy/issues/539
- 03 Feb 2019, 12:03
- Forum: ESP Easy: Software
- Topic: Updating to mega
- Replies: 5
- Views: 5800
Re: Updating to mega
https://www.letscontrolit.com/wiki/index.php/ESPEasy#2.0.2B_firmware_on_1MB_modules You upload a "ESPEasyUploaderMega" firmware that does nothing else than allow you to upload a new version of ESPeasy. But you need to use a .bin file smaller or equal to 500kB, because you can use only hal...
- 03 Feb 2019, 11:35
- Forum: ESP Easy: Projects / Applications
- Topic: ESP8266 Thermostat
- Replies: 44
- Views: 91547
Re: ESP8266 Thermostat
It is very easy schedule temperature setting from Domoticz. When I was planning my heating regulator, I imagined a similar sophisticated device with a display and buttons. But the circumstances forced me to make the quick fix, that I have achieved with ESPeasy and Domoticz. And now almost after two ...
- 27 Jan 2019, 22:50
- Forum: ESP Easy: Hardware
- Topic: Wall switch with mechanical button?
- Replies: 11
- Views: 9462
Re: Wall switch with mechanical button?
Shelly has got significantly smaller diameter than in wall box.
I think you can put two WAGOs between the wall of the box and the Shelly.
Plus you can use the Shelly connector and the switch contacts to divide the wires.
I think you can put two WAGOs between the wall of the box and the Shelly.
Plus you can use the Shelly connector and the switch contacts to divide the wires.
- 27 Jan 2019, 10:11
- Forum: ESP Easy: Hardware
- Topic: Sonoff Basic doesn't start when GPIO2 is LOW
- Replies: 3
- Views: 4321
Re: Sonoff Basic doesn't start when GPIO2 is LOW
At first I suggest using different GPIOs - I am using RX and TX pins from new Sonoffs connector.
Or you must use some circuit like this:
Or you must use some circuit like this:
- 25 Jan 2019, 21:52
- Forum: ESP Easy: Software
- Topic: Wemos with pt100/max31865
- Replies: 5
- Views: 9288
Re: Wemos with pt100/max31865
Here is example how to send data to Domoticz: https://diyprojects.io/esp8266-web-client-sending-data-domoticz-tcp-ip-wireless-api-json/ But is for different dummy device ( combination temp + hum + pressure ) By the way, your IDX 4732 is odd. Domoticz allocates IDX incrementally. So you have got more...
- 25 Jan 2019, 12:14
- Forum: ESP Easy: Software
- Topic: Wemos with pt100/max31865
- Replies: 5
- Views: 9288
Re: Wemos with pt100/max31865
And what is : Temp sensor; At Adafruit_MAX31865 library is nothing that. you create Adafruit instance calling Adafruit_MAX31865 max = Adafruit_MAX31865(8, 7, 6, 5); But you are using some sensor.getTemp function. Where it is defined? It look like mixing two independent code, but not completely.
- 24 Jan 2019, 21:20
- Forum: ESP Easy: Software
- Topic: relay go on but after gpio12.0 it will stay on help plz
- Replies: 6
- Views: 4216
Re: relay go on but after gpio12.0 it will stay on help plz
Look how this boy connected one from four relays on board from the same manufacturer - YWROBOT
Through transistor ....
https://www.instructables.com/id/ESP826 ... martphone/
https://cdn.instructables.com/ORIG/F9Z/ ... 8KRC7U.pdf
Through transistor ....
https://www.instructables.com/id/ESP826 ... martphone/
https://cdn.instructables.com/ORIG/F9Z/ ... 8KRC7U.pdf
- 24 Jan 2019, 21:08
- Forum: ESP Easy: Software
- Topic: relay go on but after gpio12.0 it will stay on help plz
- Replies: 6
- Views: 4216
Re: relay go on but after gpio12.0 it will stay on help plz
Look here: http://www.wholesalebuying.com/product/effective-stable-1-channel-5v-indicator-light-led-relay-module-for-arduino-214386 "Relay control interface by single chip IO. Low level suction close, high level release." http://irishelectronics.ie/epages/950018241.sf/en_GB/?ObjectPath=/Sh...
- 24 Jan 2019, 19:38
- Forum: ESP Easy: Software
- Topic: relay go on but after gpio12.0 it will stay on help plz
- Replies: 6
- Views: 4216
Re: relay go on but after gpio12.0 it will stay on help plz
And which version of ESPeasy ?
I think, it must works.
What response of your ESP in browser after sending this commands?
I think, it must works.
What response of your ESP in browser after sending this commands?
- 22 Jan 2019, 11:06
- Forum: ESP Easy: Software
- Topic: Rules Help
- Replies: 13
- Views: 7166
Re: Rules Help
Simply enable pullup and through switch connect gpio to ground.
- 22 Jan 2019, 09:27
- Forum: ESP Easy: Software
- Topic: NodeMcu and buzzer
- Replies: 2
- Views: 2445
Re: NodeMcu and buzzer
Send other command which sets gpio low or do it by rules with Timer.
- 22 Jan 2019, 09:19
- Forum: ESP Easy: Hardware
- Topic: Can't get 7Seg to display anymore
- Replies: 1
- Views: 1700
- 22 Jan 2019, 09:09
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 1881137
Re: Connecting a TM1637 4-Digit Display
@venom
It is simple problem.
On picture I can see you power your TM1637 from 5V on Wemos.
If you look at the TM1637 datasheet, you can read:
Min. Log H = 0.7Vdd
0,7 * 5 = 3,5V
But your ESP runs on 3,3V, so never reach 3,5v on gpio output.
Try power TM1637 from 3,3V pin
It is simple problem.
On picture I can see you power your TM1637 from 5V on Wemos.
If you look at the TM1637 datasheet, you can read:
Min. Log H = 0.7Vdd
0,7 * 5 = 3,5V
But your ESP runs on 3,3V, so never reach 3,5v on gpio output.
Try power TM1637 from 3,3V pin