Search found 281 matches
- 13 Dec 2017, 13:39
- Forum: ESP Easy: Hardware
- Topic: Esp with physical button steering a Sonoff.
- Replies: 8
- Views: 5792
Re: Esp with physical button steering a Sonoff.
Ok, on the three Sonoffs you need to have these rules: on button#switch do Event,ToggleRelay endon on ToggleRelay do if [relay#state]=0 gpio,12,1 else gpio,12,0 endif endon This makes the Sonoff button turn off or on the relay (aka the power). Now on the controller ESP unit: on button1#switch do Se...
- 13 Dec 2017, 12:58
- Forum: ESP Easy: Hardware
- Topic: Esp with physical button steering a Sonoff.
- Replies: 8
- Views: 5792
Re: Esp with physical button steering a Sonoff.
First of, do you have a MQTT broker up and running? If not, do you want one? If not, the only way is the HTTP way. MQTT will give you feedback on your push button actions more streamline. HTTP does not require any server to work, it is possible to get feedback from the Sonoffs this way but it's a b...
- 13 Dec 2017, 11:46
- Forum: ESP Easy: Hardware
- Topic: Esp with physical button steering a Sonoff.
- Replies: 8
- Views: 5792
Re: Esp with physical button steering a Sonoff.
Thanks for the answer, but did you maybe have a small sample how to do that? Thats my problem on the moment, i do't see the light.
- 13 Dec 2017, 10:53
- Forum: ESP Easy: Hardware
- Topic: Esp with physical button steering a Sonoff.
- Replies: 8
- Views: 5792
Esp with physical button steering a Sonoff.
Hello,
I have the idea to switch on/off my 3 Sonoff devices with a physical button. For that i want made a small box with a esp8266 and 3 push buttons so if it is necessary i can switch on/off my table lights without using a smartphone or tablet.
My question, is this possible on this way?
I have the idea to switch on/off my 3 Sonoff devices with a physical button. For that i want made a small box with a esp8266 and 3 push buttons so if it is necessary i can switch on/off my table lights without using a smartphone or tablet.
My question, is this possible on this way?
- 08 Dec 2017, 11:07
- Forum: ESP Easy: Hardware
- Topic: Nice application for a Espressif ESP32 Wrover-module
- Replies: 0
- Views: 1615
Nice application for a Espressif ESP32 Wrover-module
A nice application for a ESP32 https://www.elektormagazine.nl/news/de-allerkleinste-mac-plus-ter-wereld-met-een-esp32-erin?utm_source=Elektor+Nederland+%28Dutch%29&utm_campaign=f816d7319c-Bouw_snel_een_fraaie_GUI_Kleinste_Mac_Pl12_7_2017&utm_medium=email&utm_term=0_094c312cde-f816d7319c-...
- 22 Nov 2017, 16:21
- Forum: ESP Easy: Hardware
- Topic: Sonoff S20 v1.3 Header
- Replies: 13
- Views: 11002
Re: Sonoff S20 v1.3 Header
Put the header as high as possible and solder from the top side. Or remove the plastic of the header and use only the pins.
- 16 Nov 2017, 15:54
- Forum: ESP Easy: Projects / Applications
- Topic: Meek Wifi wall switch ESP8266
- Replies: 103
- Views: 86317
Re: Meek Wifi wall switch ESP8266
Nice work, looks good.
- 03 Nov 2017, 22:22
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
Re: Display - OLED SSD1306
Yep, name the display 'Display' or what ever. 2 devices with the same name is no good idea. That would be the same if 2 people with the same name live in the same house. Nice for the post man... :D Yep, your're right. I changed the name in display and that gives a better result. Thanks for the info.
- 03 Nov 2017, 16:22
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
Re: Display - OLED SSD1306
In your screenshot, you have the framed version named "BME280" so when you try to address that, it might be [bme280#bla] refers to a non existing variable of the oled framed plugin and not the BME-sensor itself. So i can never used the name of the sensor, in my case BME280, as name for th...
- 02 Nov 2017, 22:23
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
Re: Display - OLED SSD1306
Judging from the photo, that's not with my changes in the 'framed' plugin. One of the things I changed is the WiFi reception-strength bars. And also there should be a selector for the display type selection (SSD1306/SH1106). This is the 'old' code for the 'framed' plugin :) I thought is was merged,...
- 01 Nov 2017, 18:54
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
- 01 Nov 2017, 18:54
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
Re: Display - OLED SSD1306
Did you also have the BME280 plugin active, but not the chip connected? If so, try to reproduce. The BME280 is also updated by me, so perhaps I made it too aggressively try to find the device without proper timeout. And then the webserver task is no longer responsive. As you can see, the BME280 doe...
- 01 Nov 2017, 10:27
- Forum: ESP Easy: Projects / Applications
- Topic: Meek Wifi wall switch ESP8266
- Replies: 103
- Views: 86317
Re: Meek Wifi wall switch ESP8266
Great (them being remotes). ... But what do you mean with "Do they have LEDs?" I mean, if I make these connect with a ESP I'd like to have LED lights indicating if the lights are active or inactive. Making it easy to know which switch to push. And at night a small shimmer makes them easy ...
- 31 Oct 2017, 22:18
- Forum: ESP Easy: Projects / Applications
- Topic: Meek Wifi wall switch ESP8266
- Replies: 103
- Views: 86317
Re: Meek Wifi wall switch ESP8266
Hello Meek, Nice to see what you made. But can you tell us what brand of switch you used for your project? I bought a Vhome Smart Home Wireless 433MHZ Switch Shape Smart Remote Control transmitter,for touch switch home automation smart remote to use it in the same way you do. But on this moment i'm...
- 31 Oct 2017, 20:39
- Forum: ESP Easy: Projects / Applications
- Topic: Meek Wifi wall switch ESP8266
- Replies: 103
- Views: 86317
Re: Meek Wifi wall switch ESP8266
Hello Meek, Nice to see what you made. But can you tell us what brand of switch you used for your project? I bought a Vhome Smart Home Wireless 433MHZ Switch Shape Smart Remote Control transmitter,for touch switch home automation smart remote to use it in the same way you do. But on this moment i'm...
- 31 Oct 2017, 16:57
- Forum: ESP Easy: Projects / Applications
- Topic: Meek Wifi wall switch ESP8266
- Replies: 103
- Views: 86317
Re: Meek Wifi wall switch ESP8266
Hello Meek, Nice to see what you made. But can you tell us what brand of switch you used for your project? I bought a Vhome Smart Home Wireless 433MHZ Switch Shape Smart Remote Control transmitter,for touch switch home automation smart remote to use it in the same way you do. But on this moment i'm ...
- 30 Oct 2017, 17:31
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
Re: Display - OLED SSD1306
I had the problem with both versions. Ik used ESPEasy_v2.0.0-dev12_normal_4096.bin form the ESPEasy_v2.0.0-dev12.zip file After i disconnect the Wemos mini, and the BME280 and then reconnected the Wemos i was able to change the text. This worked for the normal and framed version.
- 27 Oct 2017, 13:12
- Forum: ESP Easy: Software
- Topic: Display - OLED SSD1306
- Replies: 12
- Views: 9504
Display - OLED SSD1306
Hello, I see a strange thing with the Display - OLED SSD1306 and Display - OLED SSD1306-Framed. When i put text in the lines 1-8 it isn't possible to change it. The sequence, text in the line, Submit and Close. Change the text, Submit and Close again. I work with GIT version: v2.0.0-dev12 Is this a ...
- 19 Oct 2017, 09:21
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 254978
Re: uPyEasy
Nice piece of work LisaM.
- 12 Oct 2017, 11:40
- Forum: ESP Easy: Projects / Applications
- Topic: How to hit sonoff from a aws server
- Replies: 2
- Views: 2850
Re: How to hit sonoff from a aws server
Heya,
I use this command to control my Sonoff:
On: http://192.168.0.125/control?cmd=GPIO,14,1
Off: http://192.168.0.125/control?cmd=GPIO,14,0
See the Wiki, https://www.letscontrolit.com/wiki/inde ... #HTTP_call
I use this command to control my Sonoff:
On: http://192.168.0.125/control?cmd=GPIO,14,1
Off: http://192.168.0.125/control?cmd=GPIO,14,0
See the Wiki, https://www.letscontrolit.com/wiki/inde ... #HTTP_call
- 10 Oct 2017, 20:02
- Forum: ESP Easy: Hardware
- Topic: ESPEasy and the Witty Cloud Board
- Replies: 2
- Views: 4501
Re: ESPEasy and the Witty Cloud Board
Heya, I used that board to control the window in my toilet room. This is the rule what i used for it: on wcraam-open do gpio,15,1 // Rode Led aan gpio,13,0 // Blauwe Led uit gpio,12,0 // Groene Led uit gpio,0,0 // relay on timerSet 1,2 // 2 seconds timer endon on Rules#Timer=1 do gpio,0,1 // relay o...
- 22 Sep 2017, 16:42
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy v2.0.0-dev12 released
- Replies: 44
- Views: 48262
Re: ESPEasy v2.0.0-dev12 released
Good job Edwin, thanks.
- 08 Sep 2017, 15:38
- Forum: ESP Easy: General Discussion
- Topic: DOes a separate guest network make sense?
- Replies: 10
- Views: 7914
Re: DOes a separate guest network make sense?
An advantage would be to reduce the data bandwidth used by the ESPs on your wifi network. But ESPs running ESP easy, reporting switch closures, temperatures, etc hardly use any bandwidth. My kids watching youtube and face timing, etc, those are the bandwidth hogs. Compared to listening the music an...
- 06 Sep 2017, 16:28
- Forum: ESP Easy: Hardware
- Topic: Need reset and Flash buttons on ESP-01 ??
- Replies: 6
- Views: 18874
Re: Need reset and Flash buttons on ESP-01 ??
Red light burns continuous, but imported question, do you have the black or blue version on the ESP-01? For the black version you must use the 1024.bin file and for the blue the 512.bin file. Definitively black so I'm good for the 1024 bin, thanks for the info ! Needs now to wire it fully so I can ...
- 06 Sep 2017, 15:31
- Forum: ESP Easy: Hardware
- Topic: Need reset and Flash buttons on ESP-01 ??
- Replies: 6
- Views: 18874
Re: Need reset and Flash buttons on ESP-01 ??
One button is for flash the ESP-01, is that done already it isn't necessary. The other one is for a hard reset, is sometimes handy. But remove the power do the same :D Thanks so looks like I only need to wire the Flash button to flash it ;) but first I have to figure out wiring as so far no luck ! ...
- 06 Sep 2017, 15:12
- Forum: ESP Easy: General Discussion
- Topic: DOes a separate guest network make sense?
- Replies: 10
- Views: 7914
Re: DOes a separate guest network make sense?
+1, i have the same question.
- 06 Sep 2017, 15:10
- Forum: ESP Easy: Hardware
- Topic: Need reset and Flash buttons on ESP-01 ??
- Replies: 6
- Views: 18874
Re: Need reset and Flash buttons on ESP-01 ??
One button is for flash the ESP-01, is that done already it isn't necessary.
The other one is for a hard reset, is sometimes handy. But remove the power do the same
The other one is for a hard reset, is sometimes handy. But remove the power do the same
- 06 Sep 2017, 15:00
- Forum: ESP Easy: Hardware
- Topic: BME280 - No I2C devices found
- Replies: 8
- Views: 10931
Re: BME280 - No I2C devices found
I have here the same problem, when i connect a OLED SSD1306, and i use the I2C Scanner in the Tools tab it is visible. When i connected the BME280 too it is "No I2C devices found" I used 2 brandnew BME280 and both have the same problem. I see something strange what i not can explain. I con...
- 24 Aug 2017, 20:27
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 247845
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
papperone en LisaM, Thanks for the work your both did for community so that we can work with the Itead, Sonoff Pow. It works fine. I have only one question, papperone in a earlier message you mentioned this: I will explore your suggestion about the possibility to RESET/CALIBRATE via web interface, n...
- 21 Aug 2017, 21:52
- Forum: ESP Easy: General Discussion
- Topic: ESP easy on son off
- Replies: 13
- Views: 9460
Re: ESP easy on son off
No problem with downloading the file, so a problem on your side.Its the same link, fails right at the end
- 21 Aug 2017, 16:38
- Forum: ESP Easy: General Discussion
- Topic: ESP easy on son off
- Replies: 13
- Views: 9460
- 21 Aug 2017, 11:43
- Forum: ESP Easy: General Discussion
- Topic: ESP easy on son off
- Replies: 13
- Views: 9460
Re: ESP easy on son off
For communication i use ESPlorer, https://esp8266.ru/esplorer/
You flashed the sonof, so try in esplorer the command: settings and tell us what you see.
You flashed the sonof, so try in esplorer the command: settings and tell us what you see.
- 21 Aug 2017, 10:18
- Forum: ESP Easy: General Discussion
- Topic: ESP easy on son off
- Replies: 13
- Views: 9460
Re: ESP easy on son off
Use the Arduino Environment for programming or clear the esp.
For more info look at the Wiki or here: viewtopic.php?f=4&t=291&p=2403&hilit=clear.ino#p2403
For more info look at the Wiki or here: viewtopic.php?f=4&t=291&p=2403&hilit=clear.ino#p2403
- 30 Jul 2017, 22:53
- Forum: ESP Easy: General Discussion
- Topic: Who's going to SHA2017?
- Replies: 2
- Views: 3134
Re: Who's going to SHA2017?
Both of you, have fun.
- 13 Jul 2017, 21:55
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 247845
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
@LisaM,
Thanks for the bin file, work for me at the weekend
Thanks for the bin file, work for me at the weekend
- 13 Jul 2017, 10:32
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 247845
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Is it possible to download the bin.file? I will try it on my Sonof Pow but i have on this moment not the skills to make my own bin file.
- 20 Jun 2017, 11:29
- Forum: ESP Easy: Hardware
- Topic: No wished reboot
- Replies: 7
- Views: 5135
Re: No wished reboot
You can also try it without the sensor to see how the board act.
- 15 Jun 2017, 10:27
- Forum: ESP Easy: General Discussion
- Topic: help to create a rule for a toggle switch
- Replies: 5
- Views: 4417
Re: help to create a rule for a toggle switch
In Domoticz: http://192.168.0.120/control?cmd=event,toggle In EspEasy: On toggle do if [Schemerlamp-1#Switch]=0 gpio,0,1 // Lamp on else gpio,0,0 // Lamp off endif EndOn See this as an example, see of this works for your situation. And yes, this is working for me. Even with this switch. https://m.n...
- 15 Jun 2017, 08:09
- Forum: ESP Easy: General Discussion
- Topic: help to create a rule for a toggle switch
- Replies: 5
- Views: 4417
Re: help to create a rule for a toggle switch
In Domoticz: http://192.168.0.120/control?cmd=event,toggle In EspEasy: On toggle do if [Schemerlamp-1#Switch]=0 gpio,0,1 // Lamp on else gpio,0,0 // Lamp off endif EndOn See this as an example, see of this works for your situation. And yes, this is working for me. Even with this switch. https://m.nl...
- 02 Jun 2017, 11:35
- Forum: ESP Easy: Software
- Topic: rc-switch plugin
- Replies: 62
- Views: 67337
Re: rc-switch plugin
Hello All, I've a question. Can i use this plugin for a stand alone version of Vhome Smart Home RF433MHZ Switch Shape Smart Remote Control in combination with ESP Easy, RfxCom and Domoticz? Or did i need extra hardware for this unit? https://nl.aliexpress.com/item/Vhome-Smart-Home-RF-433MHZ-Switch-S...
- 16 Feb 2017, 12:45
- Forum: Staff Announcements forum
- Topic: The way forward
- Replies: 38
- Views: 52180
Re: The way forward
I have contact with Martinus and access to the main repository. Fortunately he will stay involved with the project, but currently doesn't have the time to do any real coding. So he'll be on the background (for now). I'll keep you posted. Good to hear you will take over the work of Martinus, and i w...
- 11 Feb 2017, 17:54
- Forum: ESP Easy: Software
- Topic: ESPEasy timer switch
- Replies: 6
- Views: 12741
Re: ESPEasy timer switch
Good day, dear friends, please kindly assist with rule for my device ( aquarium controller with temp sensor and timer switch for lighting) in tutorial rules I find following example for timer switch, but I think it can work incorrectly On Clock#Time=All,7:30 do // every day at 7:30 hours switch on ...
- 10 Feb 2017, 21:24
- Forum: ESP Easy: General Discussion
- Topic: ESPEASY Devices
- Replies: 11
- Views: 9405
Re: ESPEASY Devices
What do you mean? I only give the poster advise to read the wiki.FranckkyDoo wrote:ManS-H
Try Switch Input
And take a time in the forum to read a little
That useful!!!
- 07 Feb 2017, 20:24
- Forum: ESP Easy: General Discussion
- Topic: ESPEASY Devices
- Replies: 11
- Views: 9405
Re: ESPEASY Devices
In the device list isn't a led or relay. How to use a led or relay look in the wiki.nettworker wrote:
- 07 Feb 2017, 19:05
- Forum: ESP Easy: General Discussion
- Topic: ESPEASY Devices
- Replies: 11
- Views: 9405
Re: ESPAESY Devices
Look here:nettworker wrote:Hello,
im new in EaspEasy and there is a problem.
There is no Relay, LED.... in the Devices List. I have flashed R120 and there are 33 Items in list.
Anything wrong?
http://www.letscontrolit.com/wiki/index ... dware_page
- 06 Feb 2017, 20:11
- Forum: ESP Easy: Projects / Applications
- Topic: AXA Remote 2.0 and ESP Easy
- Replies: 24
- Views: 27372
Re: AXA Remote 2.0 and ESP Easy
please find the arduino code below.. i send the http command in the web browser like this : http://IP_Adress_Esp8266/open http://IP_Adress_Esp8266/close http://IP_Adress_Esp8266/stop depending on the cable length you may want to repeat the code. now it sending CLOSE in one go with 20ms delay, in my...
- 06 Feb 2017, 09:59
- Forum: ESP Easy: Projects / Applications
- Topic: AXA Remote 2.0 and ESP Easy
- Replies: 24
- Views: 27372
Re: AXA Remote 2.0 and ESP Easy
Hi I managed to connect the serial port from esp to the axa directly, using a Lin convertor. Through http calls i can open, close en stop the device. No need for relais en you can avoid bying the wall unit as well. The 7.5v power supply that feedx the axa is used to power the esp as well, using a s...
- 01 Feb 2017, 17:21
- Forum: ESP Easy: Software
- Topic: ESP easy firmware not working?
- Replies: 12
- Views: 10121
Re: ESP easy firmware not working?
Good to hear that it works.wizardnl wrote:everything works good now just made my first prototype temp sensor.
For my interest, which version of firmware did you use? the 1024 or the 4096 bin file?
- 31 Jan 2017, 17:53
- Forum: ESP Easy: Software
- Topic: ESP easy firmware not working?
- Replies: 12
- Views: 10121
Re: ESP easy firmware not working?
Use a mobile phone or tablet, and look if esp_0 is visible.wizardnl wrote:
C:\Users\remco\Downloads\ESPEasy_R120>
But after a reboot the unit doesn't show up as a accespoint with ssid : ESP_0 as described in the tutorial?
- 30 Jan 2017, 20:31
- Forum: ESP Easy: General Discussion
- Topic: upload espeasy with arduino, no AP
- Replies: 10
- Views: 8353
Re: upload espeasy with arduino, no AP
Try in the serial monitor this command: settings