Show IP on serial

[Deennoo]

Just flashing some ESP for My project, and some off them have to connect to a different SSID, where it's difficulte to know which device are connected and there IP.

Is this possible to show IP on serial once module is connected ?

[Martinus]

type this command:

Code: Select all

settings

Should result into something like this:

Code: Select all

System Info
  IP Address    : 192.168.0.242
  Build         : 30
  Unit          : 12
  WifiSSID      : ********
  WifiKey       : ********
  Free mem      : 30656