Wifi Status Led (Solved)

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Wifi Status Led (Solved)

#1 Post by ManS-H » 20 Apr 2018, 11:06

Hello all,
I have a question. Is it possible to switched off the Wifi Status Led? I used a Wemos D1 mini and a BMP280 for logging of temp, pressure and humidity in the bedroom.
But its pretty annoying during the night to see the blinking of the Wifi Status Led. The first time i saw i was thinking it was lightning.

Who have a answer how to solve it?
Last edited by ManS-H on 21 Apr 2018, 11:43, edited 1 time in total.
Top
User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:
Contact grovkillen

Re: Wifi Status Led

#2 Post by grovkillen » 20 Apr 2018, 14:31

Am I misunderstanding you when I tell you to deactivate it under the hardware page?
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:
Top
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: Wifi Status Led

#3 Post by ManS-H » 20 Apr 2018, 14:46

grovkillen wrote: ↑20 Apr 2018, 14:31 Am I misunderstanding you when I tell you to deactivate it under the hardware page?
Yep, that option did i saw, and my problem.
But what to do exactly, i didn't find it in the Wiki:

For example:
Wifi Status LED
GPIO → LED: GPIO 16 (D0)

GPIO boot states:
Pin mode 16 (D0): Output Low

Is this correct?
Top
User avatar
vader
Normal user
Posts: 241
Joined: 21 Mar 2017, 17:35

Re: Wifi Status Led

#4 Post by vader » 20 Apr 2018, 15:44

Wifi Status LED
GPIO → - None -
Top
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: Wifi Status Led

#5 Post by ManS-H » 20 Apr 2018, 15:59

vader wrote: ↑20 Apr 2018, 15:44 Wifi Status LED
GPIO → - None -
Yep, that is the default setting. But the led is still blinking.
Top
User avatar
vader
Normal user
Posts: 241
Joined: 21 Mar 2017, 17:35

Re: Wifi Status Led

#6 Post by vader » 20 Apr 2018, 16:32

Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED...
Top
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: Wifi Status Led

#7 Post by ManS-H » 20 Apr 2018, 16:57

vader wrote: ↑20 Apr 2018, 16:32 Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED...
Yes, a BME280 on I2C.
So changing the I2C address and problem is solved?
Top
User avatar
vader
Normal user
Posts: 241
Joined: 21 Mar 2017, 17:35

Re: Wifi Status Led

#8 Post by vader » 20 Apr 2018, 17:16

If one line (SDA or SCL) from I2C uses GPIO2 (if this is LED), than change it to another free one in the hardware menu
Top
User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:
Contact grovkillen

Re: Wifi Status Led

#9 Post by grovkillen » 20 Apr 2018, 17:19

Did you power cycle after the removed setting?
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:
Top
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: Wifi Status Led

#10 Post by ManS-H » 20 Apr 2018, 17:55

vader wrote: ↑20 Apr 2018, 17:16 If one line (SDA or SCL) from I2C uses GPIO2 (if this is LED), than change it to another free one in the hardware menu
GPIO ⇾ SCL: GPIO-2 (D4).

I will change it tonight. First i must pick up my wife from the airport. :D
Thanks for your help.
Top
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: Wifi Status Led

#11 Post by ManS-H » 20 Apr 2018, 17:56

grovkillen wrote: ↑20 Apr 2018, 17:19 Did you power cycle after the removed setting?
I will do that after changing the gpio. Thanks.
Top
TD-er
Core team member
Posts: 9902
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:
Contact TD-er

Re: Wifi Status Led

#12 Post by TD-er » 20 Apr 2018, 22:06

ManS-H wrote: ↑20 Apr 2018, 16:57
vader wrote: ↑20 Apr 2018, 16:32 Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED...
Yes, a BME280 on I2C.
So changing the I2C address and problem is solved?
Nope, I2C addresses are something on the I2C bus.
You have to check the GPIO pins on the ESP module.
The default setting for the used GPIO pins for I2C are GPIO4 & 5.

Just to make sure we're talking about the same here.
Top
User avatar
ManS-H
Normal user
Posts: 286
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: Wifi Status Led

#13 Post by ManS-H » 21 Apr 2018, 10:17

TD-er wrote: ↑20 Apr 2018, 22:06
ManS-H wrote: ↑20 Apr 2018, 16:57
vader wrote: ↑20 Apr 2018, 16:32 Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED...
Yes, a BME280 on I2C.
So changing the I2C address and problem is solved?
Nope, I2C addresses are something on the I2C bus.
You have to check the GPIO pins on the ESP module.
The default setting for the used GPIO pins for I2C are GPIO4 & 5.

Just to make sure we're talking about the same here.
TD, you have absolute right. I wrote I2C address, but in my mind I meaning to change the GPIO ports.
Top
Post Reply

Return to “ESP Easy: Hardware”

Who is online

Users browsing this forum: Google [Bot] and 12 guests