Motion - SW : State 0.00 = off

[the cosmic gate]

Running ESP EASY version 120 with a HC-SR501 motion sensor connected, and when i look in the log it tells me :

Code: Select all

42339421 : SW : State 0.00
42340422 : SW : State 0.00

What means that the ESP send the "off" signal to domoticz , what gives me the result in the domo log:

Code: Select all

2016-08-26 09:30:20	Off
2016-08-26 09:29:20	Off
2016-08-26 09:28:20	Off
2016-08-26 09:27:20	Off
2016-08-26 09:26:20	Off
2016-08-26 09:25:20	Off
2016-08-26 09:24:20	Off

So after a few hours this log is 65 pages big
Is there a way to solve this ? ( or is it maybe the motion sensor itself who sends this state ? )

Thnx for helping me out (agiain)

[ayasystems]

Try setting delay = 0

The status will be send only when it has be changed

[tozett]

cool.
should go to the wiki...