Dummy device / rule not taking value

[waspie]

I'm trying to be able to send a value to a dummy device that i'll later display on a OLED display.

i have a rule:

Code: Select all

on setpoint do
     TaskValueSet 6,2,%eventvalue%
endon

a dummy device:


but when i send something to it:
http://10.0.101.129/control?cmd=event,setpoint=70.00

it doesn't change the data: (esplorer console)

Code: Select all

EVENT: setpoint=70.00
ACT  : TaskValueSet 6,2,%eventvalue%
Dummy: value 1: 0.00
Dummy: value 2: 0.00
Dummy: value 3: 0.00
Dummy: value 4: 0.00
EVENT: #Dummy=0.00
EVENT: #Dummy2=0.00
EVENT: #=0.00
EVENT: #=0.00

[paxi]

There seems to be a parsing error, this works:

Code: Select all

http://192.168.178.202/control?cmd=Event%2Ctest%3D5.77

%2C = ","
%3D = "="

[waspie]

thanks, i'll give it a go in the morning

[waspie]

didn't change anything for me. still acts like it doesnt work.

[toffel969]

Try to use quadruple dummy type. I think single type, but names in the fields with two variables is conflicting

[CoolWombat]

Shouldn't the rule be -
TaskValueSet 6,1,%eventvalue%

as you only have one value since you're using "SENSOR_TYPE_SINGLE"?

Cheers!

[waspie]

still not working. tried on 2 different huzzahs (3 total now).


url tried:
http://10.0.101.119/control?cmd=event,setpoint=75

rules:
on setpoint do
TaskValueSet 6,1,%eventvalue%
endon

serial console:

[waspie]

also, i dont have sensor type quad????

[waspie]

upgraded to the beta 2 version "espmega"
and now it works