Rule for led blink
Posted: 27 Aug 2023, 10:56
Hello everyone,
i`m newbie with esp modules.
I made some "projects" such as temperature readings on cental heating and light switching from node red and mqtt.
My new project is to make temeprature room reading.
I use esp 07, lcd 16x2 i2c, logic converter txs0108e, bme 280 (5V)...
Uploded version of espeasy is: espeasy mega 20181023 dev.
My problem is in want to make alarm if room temperature is exceed 30 degree.
When set temperature is exceeded alarm works but when temerature is below led bliks every 1s.
For better understanding i attached pictures below.
Thanks for your help.
Regards
Sam
i`m newbie with esp modules.
I made some "projects" such as temperature readings on cental heating and light switching from node red and mqtt.
My new project is to make temeprature room reading.
I use esp 07, lcd 16x2 i2c, logic converter txs0108e, bme 280 (5V)...
Uploded version of espeasy is: espeasy mega 20181023 dev.
My problem is in want to make alarm if room temperature is exceed 30 degree.
When set temperature is exceeded alarm works but when temerature is below led bliks every 1s.
For better understanding i attached pictures below.
Thanks for your help.
Regards
Sam