Search found 88 matches
- 20 Sep 2022, 23:08
- Forum: ESP Easy: General Discussion
- Topic: PWM and serial possilbe on the same ESP8266?
- Replies: 7
- Views: 2464
Re: PWM and serial possilbe on the same ESP8266?
Thank you. I the mean time I will have to change my PCB to use another GPIO.
- 20 Sep 2022, 15:27
- Forum: ESP Easy: General Discussion
- Topic: PWM and serial possilbe on the same ESP8266?
- Replies: 7
- Views: 2464
Re: PWM and serial possilbe on the same ESP8266?
Well, I have to correct my previous post.... It looks like the P1-device uses a P044_STATUS_LED on GPIO12, which 'of course' is the GPIO I intended use for the dimmer. Now the dimmer value (PWM) is interrupted by the status led of the P1 device. It would be nice if the status led GPIO was configurab...
- 18 Sep 2022, 11:48
- Forum: ESP Easy: General Discussion
- Topic: PWM and serial possilbe on the same ESP8266?
- Replies: 7
- Views: 2464
Re: PWM and serial possilbe on the same ESP8266?
Ok, I did a test and it is working so far. Thanks for the information.
- 17 Sep 2022, 11:16
- Forum: ESP Easy: General Discussion
- Topic: PWM and serial possilbe on the same ESP8266?
- Replies: 7
- Views: 2464
PWM and serial possilbe on the same ESP8266?
Hi, I am thinking of implementing a serial (P1) interface AND PWM-output (LED-dimmer) on 1 single ESP8266. Will this work or will the PWM interfere with the serial timing? In that case I will have to use seperate ESP's for each of the functions. Of course I can just try to see if it works but maybe ...
- 29 Apr 2022, 21:13
- Forum: ESP Easy: Software
- Topic: DHT22 no longer working in release 20220427
- Replies: 2
- Views: 3911
Re: DHT22 no longer working in release 20220427
Ok, I created issue #4026
- 29 Apr 2022, 13:31
- Forum: ESP Easy: Software
- Topic: DHT22 no longer working in release 20220427
- Replies: 2
- Views: 3911
DHT22 no longer working in release 20220427
I just upgraded from release 20220328 to 20220427 and see that my DHT22 is no longer working. The log states 'DHT protocol timeout'. 20220328 was working fine (and is again after downgrade). I used binary files ESP_Easy_mega_20220427_normal_ESP8266_4M1M.bin and ESP_Easy_mega_20220328_normal_302_ESP8...
- 24 Jan 2021, 12:17
- Forum: ESP Easy: Projects / Applications
- Topic: Script Lua on Domoticz and OS Execute command - PI Raspbian
- Replies: 2
- Views: 9229
Re: Script Lua on Domoticz and OS Execute command - PI Raspbian
Are you sure you're checking the right devicename? I see: RelaisChevret vs ESP11_Relai1
Also have a look at ESPEasy plugin P029 Domoticz MQTT helper. Then you do not need LUA.
Also have a look at ESPEasy plugin P029 Domoticz MQTT helper. Then you do not need LUA.
- 10 Nov 2020, 12:23
- Forum: ESP Easy: Software
- Topic: inputswitch state is deprecated - Why? [SOLVED]
- Replies: 8
- Views: 10250
Re: inputswitch state is deprecated - Why? [SOLVED]
There is an issue for this bug: https://github.com/letscontrolit/ESPEasy/issues/3338
- 30 Apr 2020, 10:38
- Forum: ESP Easy: General Discussion
- Topic: inexplicable Event
- Replies: 7
- Views: 8076
Re: inexplicable Event
I think you've bumped into this bug maybe:
https://github.com/letscontrolit/ESPEasy/issues/2834
https://github.com/letscontrolit/ESPEasy/issues/2834
- 28 Jan 2020, 08:57
- Forum: ESP Easy: Software
- Topic: mqtt commands doesn't work
- Replies: 1
- Views: 4083
Re: mqtt commands doesn't work
You can not send a command this way; the Domoticz MQTT Helper accepts only messages in the format of Domoticz.
Also keep in mind that if you send a command not from Domoticz, the status of the switch in Domoticz will not change and will be wrong.
Also keep in mind that if you send a command not from Domoticz, the status of the switch in Domoticz will not change and will be wrong.
- 16 Dec 2019, 10:46
- Forum: ESP Easy: Software
- Topic: Help needed with Rules (solved)
- Replies: 13
- Views: 8015
Re: Help needed with Rules
Maybe the problem is in your if statement.
When systime > sunset it is often also > sunrise (on the same day) and thus the result will be false.
When systime > sunset it is often also > sunrise (on the same day) and thus the result will be false.
- 29 Apr 2019, 09:52
- Forum: ESP Easy: General Discussion
- Topic: temperature sensors not listed
- Replies: 1
- Views: 1889
Re: temperature sensors not listed
It's under 'Environment'.
- 21 Feb 2019, 08:27
- Forum: ESP Easy: Software
- Topic: mqq instead of http to control pwm
- Replies: 13
- Views: 8146
Re: mqq instead of http to control pwm
You must keep subscribe topic to domoticz/out because that is the topic domoticz is publishing to.
- 20 Feb 2019, 08:42
- Forum: ESP Easy: Software
- Topic: mqq instead of http to control pwm
- Replies: 13
- Views: 8146
Re: mqq instead of http to control pwm
@megamarco83: You should use an MQTT-helper device in which you specify the idx of the device in Domoticz.
If you define a dimmer in Domoticz the MQTT-helper even changes pwm according to Domoticz percentage.
If you define a dimmer in Domoticz the MQTT-helper even changes pwm according to Domoticz percentage.
- 14 Sep 2018, 12:36
- Forum: ESP Easy: Software
- Topic: values in device tab not changing?
- Replies: 2
- Views: 3140
- 31 Jul 2018, 15:13
- Forum: ESP Easy: General Discussion
- Topic: Switch Button Long Push
- Replies: 15
- Views: 30519
- 31 Jul 2018, 09:48
- Forum: ESP Easy: Software
- Topic: using "SendToHTTP"
- Replies: 6
- Views: 5858
- 29 Jul 2018, 11:17
- Forum: ESP Easy: General Discussion
- Topic: How to connect Arduino with Nodemcu running ESPEasy?
- Replies: 4
- Views: 4469
- 29 Jul 2018, 10:58
- Forum: ESP Easy: Software
- Topic: ESPEasy reboots when configuring P1 wifi gateway
- Replies: 4
- Views: 4204
Re: ESPEasy reboots when configuring P1 wifi gateway
There is a remark about this in wiki of Ser2Net: https://www.letscontrolit.com/wiki/index.php/Ser2Net
- 23 Jul 2018, 18:53
- Forum: ESP Easy: Software
- Topic: MQTT <> Domoticz
- Replies: 3
- Views: 4097
Re: MQTT <> Domoticz
Yes, it is a workaround.
But maybe you can implement a better solution and enhance EspEasy...
But maybe you can implement a better solution and enhance EspEasy...
- 23 Jul 2018, 13:04
- Forum: ESP Easy: Software
- Topic: MQTT <> Domoticz
- Replies: 3
- Views: 4097
Re: MQTT <> Domoticz
You can use a device 'Domoticz MQTT Helper' to set switches or dimmers through MQTT.
- 20 Jul 2018, 12:55
- Forum: ESP Easy: Hardware
- Topic: RF wall mounted light switch [discussion]
- Replies: 18
- Views: 11881
Re: RF wall mounted light switch [discussion]
With the Kaku plugin you only need a rf-receiver attached to ESP.
http://www.letscontrolit.com/forum/viewtopic.php?t=2032
http://www.letscontrolit.com/forum/viewtopic.php?t=2032
- 20 Jul 2018, 10:51
- Forum: ESP Easy: Hardware
- Topic: RF wall mounted light switch [discussion]
- Replies: 18
- Views: 11881
Re: RF wall mounted light switch [discussion]
I use an RFLink (Arduino) connected to Domoticz through USB because I have more KaKu devices.
I think there is also a KaKu plugin for EspEasy.
I think there is also a KaKu plugin for EspEasy.
- 20 Jul 2018, 09:50
- Forum: ESP Easy: Hardware
- Topic: RF wall mounted light switch [discussion]
- Replies: 18
- Views: 11881
Re: RF wall mounted light switch [discussion]
I use one of these (dutch): https://www.klikaanklikuit.nl/nl/awst-8 ... elaar.htmlgrovkillen wrote: ↑20 Jul 2018, 08:48 So essentially, a wireless good looking button that can easily be mounted on the wall making it look like a light switch.
It's powered by a CR2032 battery.
- 19 Jul 2018, 09:48
- Forum: ESP Easy: Projects / Applications
- Topic: MQTT input in rules
- Replies: 19
- Views: 24177
Re: MQTT input in rules
And you might store the %eventvalue% in a dummy variable so that it is still available when there is no network connection.
- 17 Jul 2018, 10:42
- Forum: ESP Easy: Projects / Applications
- Topic: Trying to make an auto-adjusting light timer
- Replies: 17
- Views: 12035
Re: Trying to make an auto-adjusting light timer
That's a nice workaround indeed. I did not know timers can be set for as long as 24 hours.
- 17 Jul 2018, 09:37
- Forum: ESP Easy: Projects / Applications
- Topic: Trying to make an auto-adjusting light timer
- Replies: 17
- Views: 12035
Re: Trying to make an auto-adjusting light timer
But that is for 'after sunset', not before.
I use a BH1750 Lux-meter to 'adjust the sunset'
I use a BH1750 Lux-meter to 'adjust the sunset'
- 16 Jul 2018, 21:55
- Forum: ESP Easy: Projects / Applications
- Topic: Trying to make an auto-adjusting light timer
- Replies: 17
- Views: 12035
Re: Trying to make an auto-adjusting light timer
I think %sunset% was introduced in 20180618.
- 15 Jul 2018, 11:33
- Forum: ESP Easy: General Discussion
- Topic: Can esp32 with EspEasy not multitask?
- Replies: 13
- Views: 9853
Re: Can esp32 with EspEasy not multitask?
I think it's EspEasy, see viewtopic.php?t=2530#p13672
- 01 Jul 2018, 11:07
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 not supported ?
- Replies: 3
- Views: 2921
Re: Wemos D1 not supported ?
Have you read the wiki?
It mentions Wemos D! as being supported but also stated GPIO15 (D8) should not be used for connecting DHT22.
It mentions Wemos D! as being supported but also stated GPIO15 (D8) should not be used for connecting DHT22.
- 30 Jun 2018, 10:38
- Forum: ESP Easy: General Discussion
- Topic: Sending a serial command from ESPeasy to Arduino
- Replies: 16
- Views: 19874
Re: Sending a serial command from ESPeasy to Arduino
If you want a rule to execute when the switch changes state you must use that as the on condition instead of serial#raw
So:
So:
Code: Select all
on [wemosUP#Switch]=1
publish /123, test
endon
- 28 Jun 2018, 21:56
- Forum: ESP Easy: General Discussion
- Topic: Sending a serial command from ESPeasy to Arduino
- Replies: 16
- Views: 19874
Re: Sending a serial command from ESPeasy to Arduino
The wiki page you refer to is about sending commands to ESPEasy.
I think in your case you should use a serial server device. Do not have any experience with that myself but you may find some info on the forum.
I think in your case you should use a serial server device. Do not have any experience with that myself but you may find some info on the forum.
- 25 Jun 2018, 10:39
- Forum: ESP Easy: Hardware
- Topic: nodemcu on battery
- Replies: 27
- Views: 44800
Re: nodemcu on battery
I think the best way to reduce power consumption is to use a ESP directly instead of NodeMCU. The NodeMCU has some components (voltage regulator, UART) that consume power even when the ESP is in deep sleep. If you don't want to use the regulator you should use 3.3V input and not Vin. See also: https...
- 09 May 2018, 23:43
- Forum: ESP Easy: Software
- Topic: GPIO14 status by http
- Replies: 4
- Views: 3497
Re: GPIO14 status by http
You can use a controller to make ESPEasy send the values to some server or maybe query the JSON output.
- 09 May 2018, 20:41
- Forum: ESP Easy: Software
- Topic: GPIO14 status by http
- Replies: 4
- Views: 3497
Re: GPIO14 status by http
According to the wiki the status command is to Get a status set by GPIO/PWM/Servo command.
So, not for reading temp or humidity I guess.
So, not for reading temp or humidity I guess.
- 28 Apr 2018, 14:38
- Forum: ESP Easy: General Discussion
- Topic: Using rules to dim led strip ?
- Replies: 1
- Views: 2133
Re: Using rules to dim led strip ?
You can add a duration to the pwm command in EspEasy to make it fade in or out. See the wiki.
- 23 Apr 2018, 19:27
- Forum: ESP Easy: Software
- Topic: rule not triggering for distance SR04 (solved)
- Replies: 9
- Views: 5673
- 23 Apr 2018, 18:16
- Forum: ESP Easy: Software
- Topic: rule not triggering for distance SR04 (solved)
- Replies: 9
- Views: 5673
Re: rule not triggering for distance SR04
What if you leave out the condition in the on statement?
And what firmware do you use?
Rules are not easily tested indeed, you might change the loglevel to see if it shows more info.
And what firmware do you use?
Rules are not easily tested indeed, you might change the loglevel to see if it shows more info.
- 23 Apr 2018, 17:26
- Forum: ESP Easy: Software
- Topic: rule not triggering for distance SR04 (solved)
- Replies: 9
- Views: 5673
Re: rule not triggering for distance SR04
Your rule test on values < 100 but the values in the log are all > 100 so it is correct the rule is not being executed.
- 18 Apr 2018, 10:55
- Forum: ESP Easy: Software
- Topic: Log and events
- Replies: 1
- Views: 1789
Re: Log and events
These are just log entries that tell you the distance sensor measured something.
The setup of your device determines what is being sent to a controller.
The setup of your device determines what is being sent to a controller.
- 11 Apr 2018, 14:57
- Forum: ESP Easy: Software
- Topic: Rules MQTT
- Replies: 4
- Views: 6527
Re: Rules MQTT
I notice 2 things in your rules, not sure if they cause the problem.
1. You do not set timer1 on boot so the second rule will never fire.
2. Maybe there must be a comma after ' publish' instead of the space.
1. You do not set timer1 on boot so the second rule will never fire.
2. Maybe there must be a comma after ' publish' instead of the space.
- 08 Feb 2018, 08:35
- Forum: ESP Easy: Software
- Topic: Read switch state from json/domoticz
- Replies: 7
- Views: 8082
Re: Read switch state from json/domoticz
Well, then a MQTT retained message may be the way to go.
A nice explanation is here http://www.hivemq.com/blog/mqtt-essenti ... d-messages
You will need a script on Domoticz side to publish the (retained) message and
a MQTT import device on ESPEasy to retrieve it after wakeup.
A nice explanation is here http://www.hivemq.com/blog/mqtt-essenti ... d-messages
You will need a script on Domoticz side to publish the (retained) message and
a MQTT import device on ESPEasy to retrieve it after wakeup.
- 07 Feb 2018, 10:33
- Forum: ESP Easy: Software
- Topic: Read switch state from json/domoticz
- Replies: 7
- Views: 8082
Re: Read switch state from json/domoticz
I understand you want to retrieve the status of the virtual switch in Domoticz. I have never seen an example of that and a lux sensor seems a simpler solution indeed. Do you realize that in this setup it may take an hour between setting the switch and turning on the lights (depending on the sleeptim...
- 06 Feb 2018, 22:11
- Forum: ESP Easy: Software
- Topic: Serial output of RFlink and rules
- Replies: 3
- Views: 2958
Re: Serial output of RFlink and rules
Do you see the eventvalue in the log (after =)?
I think your if statement at least needs some quotes around the value you're testing.
I think your if statement at least needs some quotes around the value you're testing.
- 06 Feb 2018, 10:24
- Forum: ESP Easy: Projects / Applications
- Topic: RFID switch
- Replies: 2
- Views: 3604
- 04 Feb 2018, 00:15
- Forum: ESP Easy: Software
- Topic: Compile Error
- Replies: 3
- Views: 3736
- 02 Feb 2018, 16:41
- Forum: ESP Easy: General Discussion
- Topic: Sonoff Basic not responsive since v2.0-20180124
- Replies: 4
- Views: 3668
- 02 Feb 2018, 13:49
- Forum: ESP Easy: General Discussion
- Topic: Sonoff Basic not responsive since v2.0-20180124
- Replies: 4
- Views: 3668
Re: Sonoff Basic not responsive since v2.0-20180124
Well, it seems not a lot of people have experienced this problem too :roll:. In the mean time a have been investigating a little myself and found that the problem is probably in _P036_framedOLED plugin. I have compiled ESPEasy from V2.0 20180130 source and it did not work. However, if I replace P036...
- 30 Jan 2018, 14:16
- Forum: ESP Easy: Software
- Topic: would need to add date and some variables in the email notification
- Replies: 10
- Views: 7346
Re: would need to add date and some variables in the email notification
I think gmail requires username and password which are not in ESPEasy.
- 30 Jan 2018, 14:08
- Forum: ESP Easy: General Discussion
- Topic: Sonoff Basic not responsive since v2.0-20180124
- Replies: 4
- Views: 3668
Sonoff Basic not responsive since v2.0-20180124
Today I decided to 'upgrade' my Sonoff Basic from v2.0-20180112 to v2.0-20180130 and saw that the webpages are no longer responding. I tried several nightlies and the v2.0-20180123 is the last build that works ok; all the later builds are not working well. The Sonoff boots normally but does not resp...