Let's Control It

DomoticaRob

Yes, I use Domoticz.

I was a little too enthousiastic.

When I again pluged in the module it was not reachenable.

I will find out later what is the problem.

DomoticaRob

I had a few minutes extra so I flashed with th TD binarie: ESP_Easy_mega_20231107_normal_ESP8266_1M And it works, super. The only small disadvantage is yhat after a reboot relay 1 and relay 2 are activated. After pressing the buttons the are de-activated. I have changed the 'Send Boot State' and als...

DomoticaRob

I am out for a few days.
After the weekend I wil try the rules thing and the TD binarie.

DomoticaRob

Thanks for the very very fast respons. The relays are working. Super, super, super. One 'but' left. I also want to use the buttons of the Sonoff. Button 1 = GPIO 0 Button 2 = GPIO 9 Button 3 = GPIO 10 Button 4 = GPIO 14 Button 1, 3,and 4 are directed to the proper GPIO's Button 2 wants to be directe...

DomoticaRob

I have bought a couple of Sonoff 4CH R3 switches. Sonoff 4CH R3.jpg Sonoff 4CH R3 Print.jpg I have flashed ESPEasy and now I want to make it suitable for mij Domoticz system. Google tells me the folowing GPIO declarations: Button 1 = GPIO 0 Button 2 = GPIO 9 Button 3 = GPIO 10 Button 4 = GPIO 14 Rel...

DomoticaRob

Yes, that is the solution.

Many thanks.

: HTTP.jpg (134.73 KiB) Viewed 2244 times

DomoticaRob

For many years I have a Domoticz home automation system based on Raspberry PI 3B+ and several ESPEasy modules. Because of problems I made a complete new installation on the Raspberry Pi and now my Domoticz is running version 2023. So far so good. From the Domoticz I can send data to the ESPEasy modu...

DomoticaRob

What do you mean with 'How to use this'?

What is your purpose?

DomoticaRob

Hello Grovkillen,

That's ok with me.

For now it's working for 99% in my situation.

Maybe one day I will make time to look into it. If I find a good solution I will metion it on this board.

Succes with your job.

DomoticaRob

On the 23 of December 2018 "grovkillen" tipt us that they would update the serial.

viewtopic.php?p=36365#p34044

Does somebody knows what the status is of that?

DomoticaRob

Does that means that it also is not possible to connect with Putty?

DomoticaRob

Since I placed the ESP8266 module just in 1 meter of the router it works fine for me. Very occasionally it 'hangs'. Then it is enough for me to go in Domoticz to Settings , Hardware , and make the P1 inactive and after that I make the P1 active and it works again. So, I don't need to restart the ESP...

DomoticaRob

I do use:

ESP_Easy_mega-20181112_normal_ESP8266_4096.bin

DomoticaRob

I enlarged the cable between the Smart Meter and my ESP8266 module for 30 meters.
Now my ESP8266 module stand at a distance of 50 centimeters of my router.
That was the solution. It works now for a few month without problems.

Ofcourse, it's not how it should be. But it is what it is.

DomoticaRob

Hello Fokko,

I did sent you a PM. Let me know if you received it or not.

Enjoy, have fun,

Rob

DomoticaRob

Hello PA3VOS, I have ESPEasy running on my ESP8266 ESP12. In ESPEasy you can define a Communication - P1 Wifi Gateway. So Flash ESPEasy on your ESP8266 module. If it's not going to work for you I will find out wich tutorial I used to make it work. I assume you're a Dutch guy (PA3VOS), my father was ...

DomoticaRob

Hello Grovkillen, Does it help if I say that I have enlarged the cable between the smart meter and the ESP8266 / ESPEasy module to 30 meters. Now the module is placed half a meter from my router. Since then, I have no problems any more. That means that if there is some noise in the WiFi the ESPEasy ...

DomoticaRob

My ESP8266 module is a little bit closer to the router, that gives a better situation. But still once a day I have a dead connection. I do understand that if the RX pin of the ESP8266 is low at boot time the ESP8266 module might fail to boot. Is it an idea to use a GPIO pin of the ESP8266 to control...

DomoticaRob

Of course, there is no rush.

Are you talking about the summer holidays, or the Christmas holidays?

(hahaha).

Best wishes for 2019.

DomoticaRob

I have enlarged the cable between the Smart Meter and the BC547 NPN transistor to 10 meters. It seems that I get a good signal of the Smart Meter. Because of this enlargement the ESP8266 is become more closely to my router. In a day I will know if this is the solution. I use the RX port of the ESP82...

DomoticaRob

In advice I use RX as input port.

I will be out for two days, so Sunday I will come back on it, and in between I will read the docs.

Thanks.

DomoticaRob

It can be the problem, the WiFi signal on that side of the house is pretty poor.

Is it an idea to make a routine in the ESPEasy firmware that checks the Wifi signal/connection almost continiusly and only operate when the signal is strong enough and not getting dead?

DomoticaRob

Experia Box V10 KPN the Netherlands.

DomoticaRob

I do have a ISKRA AM550 - TD2.01 SMR 5.0 3x400V smart meter connected via a BC547 to a ESP8266 board with ESP_Easy_mega-20181112_normal_ESP8266_4096.bin on board and it works. I have my measurements in Domoticz. That's fine. But a couple of times per day the ESP8266 hangs. Then he is not vissible an...

DomoticaRob

: P1_5.png (58.28 KiB) Viewed 58340 times

DomoticaRob

Hahahahah, yes you are right. I found something that was made by McMellow: --https://www.domoticz.com/forum/viewtopic.php?f=59&t=20382&p=158563&sid=3f9e4bd3012129d745aa0c1900b53461#p158563 --[[ dzVents script to Parse P1 Smart Meter Electricity value into seperated Meter Readings. ]]-- T...

DomoticaRob

Many thanks, it works, super.

Is there a possibility to see in Domoticz also the other data from the smart meter? For example, the cummulative data. Can I program something with lua or DZVents?

: P1_3.png (18.92 KiB) Viewed 58345 times

: P1_4.png (87.75 KiB) Viewed 58345 times

DomoticaRob

Hello Domosapiens, Thanks for your reply. I have made what is in your connection diagram. Instead of your Wemos I use a ESP-01 board. When I measure with my osciloscoop on point (2) and (3) I see every second a burst of ones and zeros. At point (3) it's inverted. Where do I set the Serial log level ...

DomoticaRob

I'm sorry, I forgot.

Version:

ESP_Easy_mega-20181112_normal_ESP8285_1024.bin

On a ESP8266 ESP-01.

DomoticaRob

I can't fill in the GPIO port and Idx in Devices.

What do I do wrong?

: P1_2.png (21.17 KiB) Viewed 58412 times

: P1_1.png (25.47 KiB) Viewed 58412 times

DomoticaRob

Alles is ping-able, zie onderstaande. Wat mij opvalt is dat het ESP8266 dev board met ESPEasy (192.168.2.8) als enige geen Hostname heeft. Zou dat het probleem kunnen zijn? Hoe geef ik dit board een Hostname? Overzicht IP adressen en Ping resultaten: ==================================== ============...

DomoticaRob

: ESP.PNG (22.09 KiB) Viewed 18048 times

DomoticaRob

: WIFI Instellingen.png (21.4 KiB) Viewed 18050 times

DomoticaRob

The attachment LAN Instellingen.png is no longer available

The attachment WIFI Instellingen.png is no longer available

: LAN Instellingen.png (22.55 KiB) Viewed 18051 times

DomoticaRob

Ik heb van KPN een Experia Box v10 met de volgende installingen:

The attachment DHCP server.png is no longer available

The attachment LAN Instellingen.png is no longer available

The attachment WIFI Instellingen.png is no longer available

Mijn ESPEasy instellingen zijn:

: DHCP server.png (11.44 KiB) Viewed 18053 times

Die 192.168.2.x heb ik niet bepaald, ik heb het zo gekregen.

DomoticaRob

Hallo TD-er, Ik mijn ESP8266 dev board met ESPEasy aan mijn PC gehangen en nog voordat ik de Arduino IDE opstartte dacht ik, eens even kijken hoe het nu is. En whola, het werkte. The unit weer losgekoppeld, eigen PSU eraan, en nog steeds werken. Hoe kan dat? Nu blijkt het volgende: Ik heb drie PC's ...

DomoticaRob

Dank voor jouw reactie. Ik begrijp wat jij bedoelt.
Morgen ga ik het uitproberen, ik kan de unit nu niet loskoppelen, en ik laat weten of het gelukt is.

DomoticaRob

Hallo TD-er,

Ik doe het even in het Nederlands in de hoop dat ik ga begrijpen wat jij bedoelt.

Ik heb mijn firewall (Windows Defender Firewall) uitgeschakeld. Geen resultaat
Mogelijk dat dit niet is wat jij bedoelt.

Wat bedoel jij met 'via serial'?

DomoticaRob

No, that's not the problem. It was only a misstype in this topic. In my browser I use "," comma's. In the past I could type: http://192.168.2.8/log and I got the log. Now it's not working anymore, and it's since I changed to static IP. Because I can't come into the ESPEasy interface anymor...

DomoticaRob

The firmware version is: ESP_Easy_mega-20180104_normal_ESP8266_4096.bin Yes, I did set the gateway and netmask. Yes, it's a typo. In the good days: 192.168.2.8/log did work, and now not anymore. Ofcourse I can start all over again. But I want to have a static IP so that if my AP is powered off and o...

DomoticaRob

I do have a ESP8266 dev board with ESPEasy on it, a DHT22 temperature sensor and a relay on a GPIO. That works fine with Domoticz and was also reachable in my Google Chrome browser. So: 192.168.2.8/control?cmd=GPIO.5.1 worked fine. Then I gave the ESP unit a static IP . Since that moment I can’t rea...

DomoticaRob

Thanks for the quick response. I'm gonna order them and give it a try.

DomoticaRob

I do have a Geekcreit® NodeMcu Lua WIFI Internet Things Development Board Based ESP8266 CP2102 Wireless Module. Amica_Top.JPG I flashed ESP_Easy_mega-20180104_normal_ESP8266_4096.bin to it and it works pretty fine. But I only have 12 out of 17 GPIO ports. GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO10 G...

DomoticaRob

Both, thank you for the quick answer.

I use ESPEasy firmware, so no problem of USB => serial adapter used.

DomoticaRob

What is/are the difference(s) between: Amica: Geekcreit® NodeMcu Lua WIFI Internet Things Development Board Based ESP8266 CP2102 Wireless Module https://www.banggood.com/NodeMcu-Lua-WIFI-Internet-Things-Development-Board-Based-ESP8266-CP2102-Wireless-Module-p-1097112.html?rmmds=detail-left-hotproduc...

Search found 45 matches