Search found 301 matches
- 25 Mar 2018, 05:37
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 497823
Re: ESP32 boards
OK. Installed ESP tool on a different computer. (non win 10) Windows 7 ult. Got pyserial working ok. Set up a brand new module on a protoboard. https://www.ebay.com/itm/ESP-WROOM-32-ESP32-ESP-32S-Module-Board-WIFI-Bluetooth-BLE-Dual-Mode-Core-CPU/322478985655?ssPageName=STRK%3AMEBIDX%3AIT&_trksi...
- 24 Mar 2018, 00:52
- Forum: ESP Easy: General Discussion
- Topic: Pulled up GPIO is always 0 on boot [SOLVED]
- Replies: 8
- Views: 6051
- 24 Mar 2018, 00:05
- Forum: ESP Easy: General Discussion
- Topic: Pulled up GPIO is always 0 on boot [SOLVED]
- Replies: 8
- Views: 6051
Re: Pulled up GPIO is always 0 on boot
On the hardware page what setting do you have for GPIO boot state?
- 22 Mar 2018, 01:35
- Forum: ESP Easy: Software
- Topic: VCC is off a ways. How to compensate?
- Replies: 2
- Views: 2334
Re: VCC is off a ways. How to compensate?
The question is more of where to do that though. Do I have to use a task and if so what kind?
As it is now I just put %vcc% in the line of the OLED. I tried to put a formula there but that doesn't work.
As it is now I just put %vcc% in the line of the OLED. I tried to put a formula there but that doesn't work.
- 21 Mar 2018, 06:27
- Forum: ESP Easy: Software
- Topic: Strange problem with HC-SR04
- Replies: 8
- Views: 7952
Re: Strange problem with HC-SR04
What GPIO's are you connecting to? Can you provide a diagram of your setup?
- 21 Mar 2018, 05:09
- Forum: ESP Easy: Software
- Topic: VCC is off a ways. How to compensate?
- Replies: 2
- Views: 2334
VCC is off a ways. How to compensate?
I am using the latest mega version (almost every night upgrade :D ) I am displaying the %vcc% variable in an OLED display. I would like to know what the least complicated way is to compensate and display the actual correct voltage is. According to the ESP module the voltage is 3.16 volts. According ...
- 20 Mar 2018, 18:47
- Forum: ESP Easy: General Discussion
- Topic: Framed OLED. Write commands?
- Replies: 11
- Views: 8263
Re: Framed OLED. Write commands?
I think you could look at the oledframed.ino file in the source to see the methods. I may be wrong, not a coder but a user. I'm the same. Looking at code makes my eyes roll back in my head. :lol: I did look through that file and found the on/off commands. Did not see anything about writing to it th...
- 20 Mar 2018, 00:34
- Forum: ESP Easy: General Discussion
- Topic: Framed OLED. Write commands?
- Replies: 11
- Views: 8263
Re: Framed OLED. Write commands?
So you can turn on or off and change contrast but not write to individual lines from command line or rules?
- 19 Mar 2018, 17:54
- Forum: ESP Easy: General Discussion
- Topic: Framed OLED. Write commands?
- Replies: 11
- Views: 8263
Framed OLED. Write commands?
Wondering if you can write to specific lines on the Framed OLED plugin like you can with the regular OLED.
And if so what the command is.
Framed OLED documentation is a bit thin.
And if so what the command is.
Framed OLED documentation is a bit thin.
- 19 Mar 2018, 05:33
- Forum: ESP Easy: General Discussion
- Topic: Hummm, so where is the - I'm a dork" section? :-)
- Replies: 10
- Views: 7252
Re: Hummm, so where is the - I'm a dork" section? :-)
This is one of those times where a configurable web server port would come in very handy...
- 17 Mar 2018, 03:12
- Forum: ESP Easy: Hardware
- Topic: NodeMCU V3 AI-Thinker version
- Replies: 9
- Views: 8030
Re: NodeMCU V3 AI-Thinker version
Hope there isn't a PUYA chip under that metal cover.....
- 17 Mar 2018, 01:37
- Forum: ESP Easy: General Discussion
- Topic: Dynamic SleepMode
- Replies: 11
- Views: 9854
Re: Dynamic SleepMode
This is a perfect use case for external RTC support like the DS3231.
- 17 Mar 2018, 00:47
- Forum: uPyEasy: Hardware
- Topic: ESP8266 boards
- Replies: 4
- Views: 14506
Re: ESP8266 boards
I don't believe there is a firmware yet for the ESP8266
I feel your pain. Seems not so easy to get this going at all. I hope that changes soon.I would love to get at least one hardware piece running...
- 17 Mar 2018, 00:45
- Forum: ESP Easy: Hardware
- Topic: ESPEasy Mega 2.0 and SDS011 sleep/wake time
- Replies: 10
- Views: 9567
Re: ESPEasy Mega 2.0 and SDS011 sleep/wake time
You can post an issue on Github for this. Best place to start for feature requests such as this.
https://github.com/letscontrolit/ESPEasy/issues
https://github.com/letscontrolit/ESPEasy/issues
- 14 Mar 2018, 23:20
- Forum: ESP Easy: General Discussion
- Topic: Rotary encoder plugin - set the internal value
- Replies: 11
- Views: 10019
Re: Rotary encoder plugin - set the internal value
First off... Why are you trying to manually override the rotary encoder? It sounds like you are trying to do the impossible. How can software change something mechanical? You may be able to fool the software into thinking the switch has changed but the mechanical switch has not been fooled. If the r...
- 14 Mar 2018, 22:06
- Forum: ESP Easy: Software
- Topic: Manual IP in ESPEasy
- Replies: 9
- Views: 11191
Re: Manual IP in ESPEasy
Maybe wants to hardcode it into the firmware and compile it?
- 12 Mar 2018, 19:39
- Forum: ESP Easy: General Discussion
- Topic: Notepad++ Rules syntax highlight
- Replies: 23
- Views: 13263
Re: Notepad++ Rules syntax highlight
Found the problem. Instead of downloading the zip file from git I just right clicked the udf file and chose save as.
Downloaded the zip and it worked fine.
This is a great addition. Kudos!!
Downloaded the zip and it worked fine.
This is a great addition. Kudos!!
- 12 Mar 2018, 19:24
- Forum: ESP Easy: General Discussion
- Topic: Notepad++ Rules syntax highlight
- Replies: 23
- Views: 13263
- 12 Mar 2018, 18:45
- Forum: ESP Easy: General Discussion
- Topic: Notepad++ Rules syntax highlight
- Replies: 23
- Views: 13263
Re: Notepad++ Rules syntax highlight
Just tried to import that. Using the "user language editor" import function and all I got was "import failed"
Am I going about it wrong? (very possible)
Am I going about it wrong? (very possible)
- 12 Mar 2018, 10:18
- Forum: ESP Easy: Software
- Topic: Explanation of Rules Sets?
- Replies: 7
- Views: 6124
Re: Explanation of Rules Sets?
Each of the 4 pages can be up to 2048 characters for a total of 8192.
- 11 Mar 2018, 06:52
- Forum: ESP Easy: General Discussion
- Topic: WOW!!! Somebody installed a turbocharger!!!
- Replies: 5
- Views: 4370
WOW!!! Somebody installed a turbocharger!!!
I have a project I have been working on for a few weeks now. I update the firmware with the latest MEGA version almost every night. Something MAJOR happened with the 20180311 version. The project is a sprinkler controller. It has a 16 relay board powered by an MCP23017 IO expander. It also has a PCF...
- 10 Mar 2018, 04:13
- Forum: ESP Easy: Software
- Topic: ds1820 +5degrees
- Replies: 11
- Views: 8845
Re: ds1820 +5degrees
For what its worth. SI7021 temp and humidity sensor reads 76.6 degrees F Dallas DS18B20 reads 75.2 degrees F These 2 sensors are 1 foot away from each other on my bench right now. My 29 dollar (cheap) digital hand held thermometer reads 79 degrees F at each sensor. .5 celsius is approx 1.6 degree F ...
- 09 Mar 2018, 18:22
- Forum: ESP Easy: General Discussion
- Topic: New rules operators??
- Replies: 12
- Views: 9323
Re: New rules operators??
Well..... I suppose if I had any programming skills that would have helped.
- 09 Mar 2018, 18:03
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy32 or uPYEasy?
- Replies: 8
- Views: 9062
Re: ESPEasy32 or uPYEasy?
I see that uPyEasy only has a few plugins and BH1750 LUX sensor is not listed. The ESPEasy32 looks to have more plugins, but the wiki says that the BH1750 does not work there also. The plugins that are in the ESPEasy32 are there because it uses the exact same source code as ESPEasy does. Chances ar...
- 09 Mar 2018, 07:58
- Forum: ESP Easy: General Discussion
- Topic: New rules operators??
- Replies: 12
- Views: 9323
Re: New rules operators??
Hope you get better soon man. Being sick sucks. Take your time on the docs. I was just curious.
- 09 Mar 2018, 05:49
- Forum: ESP Easy: General Discussion
- Topic: New rules operators??
- Replies: 12
- Views: 9323
New rules operators??
I had read some rumblings on git about new rules that support AND & OR statements. Has that been implemented? Methinks that would be pretty awesome.
If so, is there anywhere one could find some documentation?
Kinda hard to test stuff if you don't have information....
If so, is there anywhere one could find some documentation?
Kinda hard to test stuff if you don't have information....
- 08 Mar 2018, 21:19
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy32 or uPYEasy?
- Replies: 8
- Views: 9062
Re: ESPEasy32 or uPYEasy?
Both of the firmwares are in the experimental or beta stage. As far as features and ease of installing I would go with ESPEasy32 because its the same code basically as ESPEasy for the 8266 so most stuff might "just work" now. I have one running right now and have a dallas temp sensor and 2...
- 08 Mar 2018, 20:00
- Forum: ESP Easy: Software
- Topic: ds1820 +5degrees
- Replies: 11
- Views: 8845
Re: ds1820 +5degrees
What are you using to make the comparison to? If they are all within .5% it sounds like they are all working correctly. What is your reference that says they are 5 degrees off?
- 07 Mar 2018, 18:02
- Forum: ESP Easy: General Discussion
- Topic: Where is the best place to report issues with ESPEasy32?
- Replies: 1
- Views: 1784
Where is the best place to report issues with ESPEasy32?
Should all issues be reported in the Experimental forum or on Github? I know the main focus is on getting the 2.0 version of ESPEasy released and work on '32 is for the future but I think there should be a dedicated place for issue reporting. TIA.
Maybe its own forum?
Maybe its own forum?
- 05 Mar 2018, 08:02
- Forum: ESP Easy: Software
- Topic: Need a quick sanity check... TaskValueSet...
- Replies: 2
- Views: 2431
Re: Need a quick sanity check... TaskValueSet...
Well, if your here at all methinks sanity left the room long ago for all of us.Need a quick sanity check
- 05 Mar 2018, 07:59
- Forum: ESP Easy: Hardware
- Topic: Any definitive wiring guide for an ESP-01 1M ?
- Replies: 17
- Views: 21221
- 05 Mar 2018, 07:22
- Forum: ESP Easy: Hardware
- Topic: Any definitive wiring guide for an ESP-01 1M ?
- Replies: 17
- Views: 21221
Re: Any definitive wiring guide for an ESP-01 1M ?
Biu what about GPIO2? Currently it floats, and it boots fine. Would I get trouble if it stay like that ? Come to think of it I am not sure about GPIO2. I might have been using a resistor to ensure it was high on boot for a relay. I would say if it boots fine floating, let it float. It can't really ...
- 04 Mar 2018, 09:20
- Forum: ESP Easy: Hardware
- Topic: Any definitive wiring guide for an ESP-01 1M ?
- Replies: 17
- Views: 21221
Re: Any definitive wiring guide for an ESP-01 1M ?
sorry is theses question seem dumb ...i'm a software guy :oops: No such thing as a dumb question. :mrgreen: I am not an expert but this works on my ESP-01 units. CH_PD can be wired direct to 3.3v. I don't use a resistor at all. Have had zero bad experience with that. RST needs a pull up resistor (1...
- 04 Mar 2018, 03:45
- Forum: ESP Easy: Software
- Topic: Level Control and Clock Output Plugin bugs
- Replies: 9
- Views: 6051
- 02 Mar 2018, 03:33
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2598351
- 27 Feb 2018, 07:15
- Forum: ESP Easy: Software
- Topic: P141 RGB Strip Plugin
- Replies: 62
- Views: 78392
Re: P141 RGB Strip Plugin
Looks cool!! Just ordered a controller. Will it be possible for you to create bin files with this plugin? Still haven't been able to figure out compiling my own.
- 21 Feb 2018, 19:58
- Forum: ESP Easy: Hardware
- Topic: ESP8266-07 Flashing problems with ESP Easy 2.0.0.x
- Replies: 1
- Views: 2060
Re: ESP8266-07 Flashing problems with ESP Easy 2.0.0.x
I may be wrong but I think ESP-07 modules only have 512k of flash memory. The ESP-07S has 4 megs of flash. The -07 will not work with the newer versions of ESPEasy. I believe the newest version that will work is the R120 firmware. You can find those older releases here. https://www.letscontrolit.com...
- 21 Feb 2018, 03:01
- Forum: ESP Easy: General Discussion
- Topic: How flexible are if statements w/ %eventvalue%v?
- Replies: 9
- Views: 7338
Re: How flexible are if statements w/ %eventvalue%v?
Perhaps a study of this link will help?
https://www.letscontrolit.com/wiki/inde ... rial_Rules
https://www.letscontrolit.com/wiki/inde ... rial_Rules
- 21 Feb 2018, 02:53
- Forum: ESP Easy: General Discussion
- Topic: PCFGPIO command resets every other pin (pcf8574 8bit IO expander)
- Replies: 13
- Views: 10024
Re: PCFGPIO command resets every other pin (pcf8574 8bit IO expander)
The pull request has been merged into the Mega builds. You can use it right now.
The chip can sink up to 50ma per pin. Plenty for most relays I would think.
That is of course if the relay triggers on with a ground signal.
The chip can sink up to 50ma per pin. Plenty for most relays I would think.
That is of course if the relay triggers on with a ground signal.
- 20 Feb 2018, 02:35
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 56084
- 19 Feb 2018, 19:41
- Forum: ESP Easy: General Discussion
- Topic: PCFGPIO command resets every other pin (pcf8574 8bit IO expander)
- Replies: 13
- Views: 10024
Re: PCFGPIO command resets every other pin (pcf8574 8bit IO expander)
There is currently a pull request with a fix for this issue.
https://github.com/letscontrolit/ESPEasy/pull/897
https://github.com/letscontrolit/ESPEasy/pull/897
- 19 Feb 2018, 07:10
- Forum: ESP Easy: General Discussion
- Topic: Setting up environment for compiling
- Replies: 6
- Views: 6938
Re: Setting up environment for compiling
The Wiki is your friend.
https://www.letscontrolit.com/wiki/inde ... are_Upload
https://www.letscontrolit.com/wiki/inde ... are_Upload
- 18 Feb 2018, 18:54
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy light sleep mode
- Replies: 3
- Views: 2965
Re: ESP Easy light sleep mode
I don't think lite-sleep is currently supported. You could request support for it on Github.
https://github.com/letscontrolit/ESPEasy
https://github.com/letscontrolit/ESPEasy
- 18 Feb 2018, 18:42
- Forum: ESP Easy: Projects / Applications
- Topic: Water Level Control Relay Rule
- Replies: 6
- Views: 6029
Re: Water Level Control Relay Rule
You did not mention the pir sensor at first. That changes things quite a bit because rules don't allow multiple "if" or "and" statements. So I would look at creating "events" based on the water level. This way you can make up for the rule limits. Something like this.......
- 17 Feb 2018, 20:08
- Forum: ESP Easy: Software
- Topic: How to control 1-wire-switches e.g. DS2405
- Replies: 3
- Views: 3815
Re: How to control 1-wire-switches e.g. DS2405
There is a way to extend I2C for just about any distance you may need. I'm looking at possibly trying these out.
https://www.digikey.com/product-detail/ ... ND/1216549
https://www.digikey.com/product-detail/ ... ND/1216549
- 17 Feb 2018, 17:21
- Forum: ESP Easy: Projects / Applications
- Topic: Water Level Control Relay Rule
- Replies: 6
- Views: 6029
Re: Water Level Control Relay Rule
Have you read the Wiki page?
https://www.letscontrolit.com/wiki/inde ... rial_Rules
What you want to do is quite easy.
https://www.letscontrolit.com/wiki/inde ... rial_Rules
What you want to do is quite easy.
- 16 Feb 2018, 21:59
- Forum: ESP Easy: General Discussion
- Topic: PCFGPIO command resets every other pin (pcf8574 8bit IO expander)
- Replies: 13
- Views: 10024
Re: ESPEasy and multiple Switch inputs (pcf8574 8bit IO expander)
To use the PCF8574 as an output device it is not necessary to configure a task. It will "just work" without having to configure it at all. The only time you need to configure a task is when you are using it as an input. I was under the impression that you had to configure at least 1 pin as...
- 15 Feb 2018, 19:44
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Netscan
- Replies: 30
- Views: 21605
Re: ESP Easy Netscan
As far as node name list, my list always is always blank on all devices. All my units do have a unique Unit number, but they apparently don't see each other. Not sure what type of comm protocol they are trying to use or if there is some other configuration that I don't have set up for them to see e...
- 15 Feb 2018, 06:02
- Forum: ESP Easy: Hardware
- Topic: ESP-01 V3 flashing issues
- Replies: 53
- Views: 52950
Re: ESP-01 V3 flashing issues
And I was wondering why we have the VCC disabled in the first place. Lots of people are trying to rebuild with VCC defined. When the VCC feature is enabled it connects internally to the ADC pin on the ESP if I'm not mistaken. If this is true does that make it unusable for external ADC functions? Th...
- 14 Feb 2018, 19:02
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Netscan
- Replies: 30
- Views: 21605
Re: ESP Easy Netscan
Here is the output I get. All my units have names also. Looking good!!