Hello
Wemos D1 mini configured on ESPEasy with 3600s in deep sleep delay using a I2C SHT30 Wemos shield to send temperature to an MQTT server awake from deep sleep around each 5 mn.
The same board with a DHT22 Wemos works well.
Any idea ?
SHT30 deep sleep > 5 mn
Moderators: grovkillen, Stuntteam, TD-er
-
TD-er
- Core team member
- Posts: 9904
- Joined: 01 Sep 2017, 22:13
- Location: the Netherlands
Re: SHT30 deep sleep > 5 mn
How did you wire the "wake" pin?
-
hinano2012
- New user
- Posts: 4
- Joined: 13 Mar 2018, 00:27
Re: SHT30 deep sleep > 5 mn
Hello
thanks for your help.
I use the same board for the DTH22 or the SHT30 .
The only difference is on ESPeasy device configuration DHT22 or SHT30.
It's a Wemos D1 mini V3.0.0 with a jumper SJ1 on the back of the board to solder to enable wake up on deep sleep
That means RST pin connected to GPIO16 pin.
thanks for your help.
I use the same board for the DTH22 or the SHT30 .
The only difference is on ESPeasy device configuration DHT22 or SHT30.
It's a Wemos D1 mini V3.0.0 with a jumper SJ1 on the back of the board to solder to enable wake up on deep sleep
That means RST pin connected to GPIO16 pin.
Who is online
Users browsing this forum: Ahrefs [Bot] and 22 guests