Let's Control It

ManS-H

We wish you the same for 2025

ManS-H

Which version should I select if I want to work with servo sg90. I can no longer see the wood for the trees in the files

ManS-H

I could not find anything that can help you directly. However, here are some links that you may find helpful: https://www.letscontrolit.com/forum/viewtopic.php?t=10193 https://emariete.com/en/connect-sensor-bme280-speasy/ https://www.theengineeringprojects.com/2019/04/introduction-to-bme280.html Th...

ManS-H

After a hard drive crash, I lost all backups of the Nextion and EspEasy.
My biggest problem now is, how do I get the data from the BME280 visible again on the Nextion.
Can't find an example like this. This is currently what I have.

: espeasy-screen.jpg (79.33 KiB) Viewed 2253 times

: esp nextion plugin.jpg (97.13 KiB) Viewed 2253 times

ManS-H

Thanks for your message. It's very helpfull.

ManS-H

Which brand ESP32 can I best use as a replacement for ESP-8266 There are several brands and type numbers. Which one do the developers of ESPEasy recommend?

ManS-H

Hello, I have a general question. Thursday I got another package from my provider Ziggo, so different modem a Sagemcom F3896LG. With my previous modem went the combination of 2.4 and 5.0 gb together with extender reasonably well But this combination gives more problems with 2.4 gb units. My question...

ManS-H

The other 3 lightsensors in the housing still doing their jobs => no need for urgent repair of the BH1750. However, the protecting window of plastic & gaze of the sensors' housing (as shown in 1st message in this thread) has increasingly been discolored & fractured due to prolonged UV/light...

ManS-H

The T&H-sensors of Sensirion type SHT3x are good choice (also considering trade-off performance vs. cost), and often used in the 'better' Meteo-systems. SHT4x is the even better variant. SHT3x can be purchased enclosed within protective capsule, which should enable them to survive longer, espec...

ManS-H

About the parts which may be broken. The DHT series are for sure a good candidate for replacement, but that's because they always are a good candidate for replacement. Especially the DHT11 is utter garbage. The DHT22 is already infinitely better compared to the DHT11, but still garbage. So in your ...

ManS-H

Forget the whole story, a BIG mistake from myself. I missed a "endon" in my rule.

ManS-H

Is there something changed in the rule system? Now that it is getting fresh I have made the automatic open closing of the toilet window active again. I am working with this version: Build: ESP_Easy_mega_20220427_normal_ESP8266_4M1M Apr 27 2022 This is the rule, on wcraam-open do gpio,15,1 // relay o...

ManS-H

TD-er wrote: ↑28 Aug 2022, 11:53 Great!
And just at the moment I was thinking about actually fixing the CO2-type to Domoticz controllers which is an outstanding issue for the last years...
This is a perfect excuse to procrastinate

This works perfect now.

: CO2-3.jpg (37.77 KiB) Viewed 19882 times

ManS-H

sendtohttp,username:password@ip,80,.... (or whatever port you need) Or (this is also new) sendtohttp,http://username:password@ip/.... Or if you need to specify the port like 8080: sendtohttp,http://username:password@ip:8080/.... With of course username and password replaced with whatever you've got...

ManS-H

When sending it via rules, you must add credentials, which is only added very recently and which is also what is somewhat breaking the sendtohttp on the last build. Can you try this build from GitHub Actions: https://github.com/letscontrolit/ESPEasy/actions/runs/2925704851 Have you tried to downloa...

ManS-H

Ath wrote: ↑27 Aug 2022, 18:39 You have to include the authentication and the command in the same request, it doesn't 'stick' after the first one. My example is working like that.

Ik haak af. Even with your line and my ip and user,& password is get this: HTTP : SendToHTTP 192.168.xxx.xx GET... failed HTTP code: 401

ManS-H

...How do I put the username and password in a rule format. I can't find any info on this. I read the discussion with ThomasB on the same question, but then my knowledge falls short. I send some special commands to Domoticz using this type of command: SendToHTTP,192.168.1.xxx,8080,/json.htm?usernam...

ManS-H

There used to be some issue with CO2, at least when using a device in Domoticz defined as CO2 sensor. The CO2 plugin in ESPEasy does send it as nvalue and it should be svalue (or vise verse) That's the reason I've been using the CO2 sensors as "custom" in Domoticz. But that's an issue for...

ManS-H

What Domoticz version are you running? The latest (& greatest)? And you haven't disclosed what type of controller you use, HTTP or MQTT? The latest and i use http I see something strange, have updated 2 units to HEAD_56d3225, 20116 - Mega The data is refreshed with user and password in EspEasy ...

ManS-H

Which build are you using? Since the last build, there is an issue with sending to HTTP, on which I'm working hard to fix. The build from June should not have this issue. I used this build: ESP_Easy_mega_20210223_normal_ESP8266_4M1M I use various builds side by side under the motto "If it work...

ManS-H

A few possibilities: - Password is very long (> 32 characters)? -> Enable 'Use Extended Credentials' and re-enter the password - Made a typo in the Controller Password? -> re-enter the password - Made a typo in the Controller User? -> re-enter the username - Are you using the http port for Domoticz...

ManS-H

A few possibilities: - Password is very long (> 32 characters)? -> Enable 'Use Extended Credentials' and re-enter the password - Made a typo in the Controller Password? -> re-enter the password - Made a typo in the Controller User? -> re-enter the username - Are you using the http port for Domoticz...

ManS-H

Hello,

I was very careless not to secure Domoticz with a password.
Now I have secured Domoticz with a username and password and also used this data at the EspEasy Controller page and then did a reboot at the ESP.
But now no data is going to Domoticz.
What am I doing wrong?

ManS-H

I have been using a number of Mhz19-B Co2 sensors with Espeasy for some time now to my complete satisfaction. Now I have bought a Mhz19-C, but I can't get it to work, tried with various Espeasy relases. I use a Wemos for this. My question now is, are there other users with a working Mhz19-C? Yours ...

ManS-H

Thanks, i wil try it.

ManS-H

Hello all,

My H801 Wifi Controller here is still working with ESP Build 147, now I would like to bring it to the latest state. My question, is the H801 still supported? And which version should I use.

ManS-H

I've got a question about the Blitzwolf BW-SHP6, which version of ESPEasy should I use if I want to make use of all the possibilities of this smartplug?

Greetz, ManS-H

ManS-H

Giobbe,
Look here for some info about M5Stack:
viewtopic.php?f=2&t=7539&p=43217&hilit=M5Stack#p43217
viewtopic.php?f=5&t=7480&p=42698&hilit=M5Stack#p42696

Maybe it can help.

ManS-H

TD-er wrote: ↑31 Oct 2021, 11:16 Why are the red covers punctured?
I'm not sure if shrinking tube would be the best suitable for keeping it water tight.
Maybe with teflon tape between it, but just shrinking tube isn't that water tight.

Look here: https://www.allekabels.nl/kabel_accesso ... -lijm.html

ManS-H

TD-er wrote: ↑29 Aug 2021, 15:29 Great
I wonder if using a slash will ever lead to issues in an event 'name', but I guess it will not really be a problem.

No problem at all

: ESPEasy-1.jpg (64.82 KiB) Viewed 9375 times

ManS-H

Thanks TD-er, That was the solution, asyncevent. I control AXA with three relays for each command one relay, so i changed the code a bit. And this works as a charm. on wcraam-open do gpio,0,0 // relay on timerSet 1,2 // 2 seconds timer endon on Rules#Timer=1 do gpio,0,1 // relay off endon on wcraam-...

ManS-H

I'm using the Wemos D1 mini to control my Axa Remote by relays. I use the following rules for opening and closing the window. on wcraam-open do gpio,0,0 // relay on timerSet 1,2 // 2 seconds timer endon on Rules#Timer=1 do gpio,0,1 // relay off endon on wcraam-dicht do gpio,5,0 // relay on timerSet ...

ManS-H

TD-er wrote: ↑13 May 2021, 12:34 Then I guess it may have to do with changing the build environments to GitHub Actions from Travis.
This required some changes in the build scripts.

I will have a look at it.

Thanks,

ManS-H

TD-er wrote: ↑13 May 2021, 12:14 Perhaps it was not set in the new build process?
When was this built? (see sysinfo page)
Did you build it yourself?

By the way, nice uptime

Nope i download the zip file from Git Hub. But even the latest version has the same problem.

: firmware-1.jpg (38.69 KiB) Viewed 10157 times

: firmware-2.jpg (49.92 KiB) Viewed 10157 times

ManS-H

Hello, i've got a question about the builds.

: 20200608 build.jpg (34.87 KiB) Viewed 10164 times

: 20210223 build.jpg (37.43 KiB) Viewed 10164 times

Why is "Git Build:" empty?

ManS-H

I believe my problem is solved since i unchecked the send to controller box. MH-Z19B.jpg Together with this rule, on CO2#PPM do SendToHTTP,192.168.178.53,8080,/json.htm?param=udevice&type=command&idx=4578&nvalue=[CO2#PPM]&svalue=0 endon Now it's works perfect in Domoticz, Air Quality...

ManS-H

I have still three boards working with build 145, works perfect.
ESPEasy_R145_RC6.zip is available.

ManS-H

i would use the air quality sensor in domoticz it's graphs are way better and it actually talks about CO2 this sensor needs the nvalue so you need to use the rules Publish domoticz/in,'{"idx":349,"nvalue":[Slaapkamer#PPM],"svalue":""}' // CO2 sensor in domoti...

ManS-H

TD-er wrote: ↑18 Apr 2021, 19:06 Use "Custom" sensor type in Domoticz.
That's working fine for over 3 years on my setup.

Ok, thanks.

ManS-H

I wonder why it was working as an air quality sensor in the first place. Domoticz does have a sensor type "CO2", but that one does need "the other" type we're sending (either we're sending the Nvalue and it needs the Svalue or vice verse) so that would not have worked at all. No...

ManS-H

What is best to use in combination ESPEasy and MH-Z19B and Domoticz, air quality or custom sensor? I have two CO2 sensors, the first one worked perfectly with air quality from March 18 to April 7, then it did not constantly refresh the data in Domoticz, now switched to custom sensor. The second one ...

ManS-H

iron wrote: ↑23 Mar 2021, 13:17 This works for me :
Code: Select all
  if %systime% > %sunset% or %systime% < %sunrise%
       LongPulse,4,1,%eventvalue1%
  endif

Thanks, it works also for me so the problem is solved.

ManS-H

I made a new request in the correct forum. :D What do i wrong? You could have placed this in the ESPEasy part of the forum :lol: This is not working: On PIR#Motion do // Motion detected: if %systime% > %Sunset% // After 18:48 Sunset ESPEasy currently has a limitation that while parsing the IF line, ...

ManS-H

New request, now in the correct forum. :D What do i wrong? This rule is working: On PIR#Motion do // Motion detected: if %systime% > 18:48 // After 18:48 Sunset gpio,12,1 // Lamp on timerSet 1,60 // start timer endif if %systime% < 6:30 // Before 6:30 Sunrise gpio,12,1 // Lamp on timerSet 1,60 // st...

ManS-H

What do i wrong? This rule is working: On PIR#Motion do // Motion detected: if %systime% > 18:48 // After 18:48 Sunset gpio,12,1 // Lamp on timerSet 1,60 // start timer endif if %systime% < 6:30 // Before 6:30 Sunrise gpio,12,1 // Lamp on timerSet 1,60 // start timer// endif endOn On Rules#Timer=1 d...

ManS-H

There are some commands available for switching the range. ESPeasy had them before, but I disabled them as it is a very effective way of destroying your factory calibration data. ESPEasy does not limit the range to 2000 ppm, it is the sensor you've got which is set to some range. On older builds it...

ManS-H

Question about MH-Z19B, is there a setting to switch between the following options?
1000 ppm range, 2000 ppm range, 3000 ppm range and 5000 ppm range.

I see when I use firmware ESP_Easy_mega_20210114_normal_ESP8266_4M1M that the range is max 2000 ppm.
And make a new version is for me a bridge to far.

ManS-H

Yesterday the postmen bring me the C't-3 magazine. There was a nice article about ESPEasy, https://www.ct.nl/softlink/2103126/

ManS-H

The tank with its (on the road heavily slushing) mass has to be fixed as tight as possible. No way to use these kind of sensors. You can use a flowmeter and count what you use. Another possibility is descripe here: https://www.camperforum.nl/viewtopic.php?t=8457836 Its in Dutch, so you need Google ...

Search found 286 matches