I only see the mac address but no ip.

Moderators: grovkillen, Stuntteam, TD-er

Message
Author
jpascher
New user
Posts: 6
Joined: 07 Apr 2018, 11:51

I only see the mac address but no ip.

#1 Post by jpascher » 07 Apr 2018, 12:12

Did set perhaps a wrong static ip Adresse but now i cant get at the AP.
Refashing als seams not to help. Dos the wemos keep the settings after flashing?
I would need to reset all as i can if i load a more rudimentäre image via Arduino. with the line wifiManager.resetSettings();

Bin file in use:
ESP_Easy_mega-20180405_dev_ESP8266_4096.bin

I am relay new to the project, so please be Patient with me.


Console log:
WIFI : AP Mode disabled
WIFI : AP Mode ssid will be ESP_Easy-0 with address 192.168.4.1
IP : Static IP :3355486400
WIFI : Connected! AP: W900JP (E8:DF:70:6C:81:83) Ch: 13
WD : Uptime 0 ConnectFailures 0 FreeMem 14352
WD : Uptime 1 ConnectFailures 0 FreeMem 14352
WD : Uptime 1 ConnectFailures 0 FreeMem 14352
Last edited by jpascher on 07 Apr 2018, 12:20, edited 1 time in total.
Top
User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden

Re: I only see the mac address but no ip.

#2 Post by grovkillen » 07 Apr 2018, 12:14

Please use 20180319 or something close to that date since we're fixing stuff with the WiFi and users might experiencing trouble configuring clean, new, units.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:
Top
jpascher
New user
Posts: 6
Joined: 07 Apr 2018, 11:51

Re: I only see the mac address but no ip.

#3 Post by jpascher » 07 Apr 2018, 12:22

Thank for the answer i will tray a older version.
Top
jpascher
New user
Posts: 6
Joined: 07 Apr 2018, 11:51

Re: I only see the mac address but no ip.

#4 Post by jpascher » 07 Apr 2018, 14:29

Where can i find an older bin file?
Top
User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden

Re: I only see the mac address but no ip.

#5 Post by grovkillen » 07 Apr 2018, 14:30

On GitHub under releases.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:
Top
jpascher
New user
Posts: 6
Joined: 07 Apr 2018, 11:51

Re: I only see the mac address but no ip.

#6 Post by jpascher » 07 Apr 2018, 15:35

Thank found the link: https://github.com/letscontrolit/ESPEas ... 0-20180319
Top
jpascher
New user
Posts: 6
Joined: 07 Apr 2018, 11:51

Re: I only see the mac address but no ip.

#7 Post by jpascher » 07 Apr 2018, 15:53

Thanks, looks like all setting i made before are still there.
For me it looks like the ip address war red with the newer image the wrong way round, i saved 192.168.0.200 but 200.0.168.192 in dezimal (3355486400) was red.

Bootlog now:

INIT : Booting version: v2.0-20180319
INIT : Warm boot #3
FS : Mounting...
FS : Mount successful, used 75802 bytes of 957314
INIT : Free RAM:19432
INIT : I2C
INIT : SPI not enabled
WIFI : AP Mode disabled
WIFI : AP Mode ssid will be ESP_Easy_0 with address 192.168.4.1
IP : Static IP :192.168.0.200
WIFI : Connecting W900JP attempt #0
WD : Uptime 0 ConnectFailures 0 FreeMem 16880
WIFI : WiFi connect attempt took: 1008 ms
WIFI : Connected! IP: 192.168.0.200 (ESP_Easy_0) AP: W900JP AP BSSID: E8:DF:70:6C:81:83
Top

Return to “ESP Easy: Software”

Who is online

Users browsing this forum: Anthropic Claude Bot [bot] and 32 guests