Let's Control It

vojtishek

Hi, Im using this sensor in water tank as the HCSR04 destroyed by humidity in a days. Currently measuring for month stable values. Maximum tank measure height is 3m. Accuracy +- 100 litres, sufficient for me for 9000 litres tank. Please provide what is your setup, what controllel you are using etc. ...

vojtishek

Thanks guys, really quick answers.
I'm going to buy them

vojtishek

Hi all,

any idea how to get nice wifi relay switch into ESP Easy which will perfectly fit into wall mount inside existing wall switch?

https://shelly.cloud/product/shelly-1-open-source/

Or at least into domoticz

Vojta

vojtishek

Hi all, just installed counting as per scheme and it looks working properly. I've did one check after 8 hours to merge counter and my domoticz measures. Results were same on both sides. One hint for you which will find S0 output on pins 20 and 21. Polarity as per follow S0 - 20(+), 21(-). Thanks for...

vojtishek

Another issue when tried to measure just count when thermostat turned on and light started to shine.
Its a light through the red cover, diode on pulse counter get it, but counter went mad and still increasing dozens of counts.

When tried normal handlight blink worked like a charm.

Kinda desparate

vojtishek

Hi, where I can find a plugin please and how to setup domoticz?
Basically I would like to measure time when my termostat light is on and put formula in espeasy to get wattage.
Then send to domoticz.

Help appreciated.
Vojta

vojtishek

Hi all,

I would like to get a Time value only from Pulse sensor as my termostat for heating turn on light when active.
If there is possibility to have a time in domoticz, then I can calculate somehow appr. consumption.

Any idea please?

Thanks
Vojta

vojtishek

Hi all, I've connected htu21d with wemosd1 mini. Sensor Is outside box, So no heat from chip. But still temperature higher then should be in comparsion with reality. Specifically +2, +3 C°. This is quite huge as I was in feeling this sensor Is more accurate then dht22. Could you please share your ex...

vojtishek

Just mention that, because I've downloaded by save as just the plugin from github and that doesnt work. There is need to download whole master zip and extract just the plugin from it and copy into release folder ESPEasy
Try another release

vojtishek

Did you download whole master zip from https://github.com/ESP8266nu/ESPEasyPluginPlayground and extract only _P105_RGBW.ino?

vojtishek

xbmcnut wrote: ↑12 Jun 2017, 12:13 Hmmm. Do I need to be using older builds?

Ah, I didn't try v2.0.0-dev10 so I can't sat if it's functionable or not. Try to compile it for RC147. This one worked for me.

vojtishek

Hey there, Could someone give me a hint on how to add _P105_RGBW.ino for H801 to Platformio so I can compile? New to Platformio so any assistance would be appreciated. Hi, I'm using Espeasy r147 http://www.letscontrolit.com/downloads/ESPEasy_R147_RC8.zip. Then you need to copy P105_RGBW.ino into fo...

vojtishek

Hi, I' m not able to answer from software point of view. Regarding hw, you can use wemos d1 mini pro with connector on external antenna https://wiki.wemos.cc/products:d1:d1_mini_pro Repeaters are not the best option. I recommend some strong wifi for exampe ubiquiti unifi ap https://www.ubnt.com/unif...

vojtishek

wow, pretty impressive
now I´m feeling like a total rookie

Really nice to have you here

vojtishek

Finally it works using following formula on Momentary#Switch do if [relay#Switch]=1 gpio,12,0 else gpio,12,1 endif endon I´ve bought new sonoff and test it nearby wifi, succesfully reflecting the status in domoticz. Just one thing, there is delay around 7 seconds when status change in domoticz. Do y...

vojtishek

Hi, I think the way it supposed to work is as follows: The device you have added in ESPEasy firmware (devices) is a switch that can be controlled. In Domoticz you create a virtual switch and enter the http cmd's to control the switch in your SONOFF device: 'On' action: http://192.168.1.21/control?c...

vojtishek

Ah, ok didn't know about this one, Im gonna try it out

vojtishek

Found it. Turns out I copied the sendtohttp statement from a rules example somewhere, and it contained an error. I had already wondered about the extra "m" in "paramm". I now tried this: sendtohttp,10.0.0.199,8080,/json.htm?param=switchlight&type=command&idx=1687&swi...

vojtishek

If I understand correctly and sorry if not, then so far I know following http command rules available.
I'm using one for switching GPIO's

https://www.letscontrolit.com/wiki/inde ... _Reference

vojtishek

I have the same output, in detail choppy +- 0.1 C°. Probably as mentioned related to sensor accuracy. My friend recommended me to try "HTU21D Temperature and Humidity Sensor" should be more accurate so will see. I have two identical dht22 sensors, difference between temperature 0.5 but hum...

vojtishek

If you mean to administrate your devices through the internet, then I would not recommend that. At least in situations, when you are not using strong firewall and vpn tunnel connection. In a better situation your server for controlling sensors can be misused by netbots. But there are so many worst r...

vojtishek

Configured, conf file adjusted. Working like a charm right now.
Thanks Shardan a lot

If someone else needed to help with that, then please let me know, I will guide you.

vojtishek

If you want to collect logs over a period of time why not set up a syslog server. I have one running as a service on my Media PC (which also hosts openhab2 and mosquitto) Through the advanced settings on ESPeasy you can then point the ESPeasy device to the syslog server ip address and set the level...

vojtishek

Hi all, could you please share what are the best practices to collect logs from espeasy. As esp has limited amount of ram then there Is no ability how to get log data after crash.
Thanks for idea
Vojta

vojtishek

I've used the settings you recommend for "Momentary". Situation is that relay changing 0/1 based on "Momentary" in espeasy, but not reflecting status in domoticz. Really appreciate your help and If possible to make sharing screen session, then I will let you know when available....

vojtishek

Yes, definitely. Electricity in my new house is in plan during October so I will make new topic until that period

vojtishek

Thanks Shardan, completely make a sense.
Still thinking about distribution of power for sensors in ceiling through whole house with one reliable source of voltage.

vojtishek

So It looks there was a problem with power adaptor, which I´ve used, cheap one from aliexpress. If you use USB power adaptor: I recommend anyone buy Wow, thanks for that. Just added into my cart, definitely something what missed in my accessories. Just wondering, what exactly happened in cheap powe...

vojtishek

So It looks there was a problem with power adaptor, which I´ve used, cheap one from aliexpress. Most probably some drop of voltage during regular wake ups. Now I' m using another one from old cellphone and 12 hours without any problem, so let's see. Stupid question, but where I will find the weblogs...

vojtishek

I´m using firmware image R147_RC8.
I will try to get some logs and come back with results.

vojtishek

Thanks, I´ve tried following but without success. If understand correctly then send to http should switch relay domoticz switch on/off according to momentary button. on Momentary#Switch do sendtohttp,192.168.0.106,8080,/json.htm? param=switchlight&type=command&idx=8&switchcmd=Toggle end...

vojtishek

Hi, I just running wemos d1mini with dht shield and as it's heating and increasing temperature of sensor then I decide to use deep sleep to decrease chip heat. I've used 60 seconds interval without any trouble in deep sleep for appr. 24 hours, then It's stucked. At the moment every time I enable dee...

vojtishek

on lamp_on do gpio,12,1 endon on lamp_off do gpio,12,0 endon on Momentary#Switch do if [Momentary#Switch]=1 event lamp_on else event lamp_off endif sendtohttp,192.168.0.106,8080,/json.htm?param=switchlight&type=command&idx=8&switchcmd=Toggle endon Have you tried to have the sendtohttp c...

vojtishek

@ vojtishek For me this works in Domoticz: on lamp_on do gpio 12,1 gpio 13,0 inputswitchstate 0,1 endon on lamp_off do gpio 12,0 gpio 13,1 inputswitchstate 0,0 endon on Momentary#Switch do if [Momentary#Switch]=1 event lamp_on else event lamp_off endif endon Thanks, but not working for me, changing...

vojtishek

on cozinha_btn_luz#Switch do sendtohttp,192.168.25.150,8888,/json.htm?param=switchlight&type=command&idx=76&switchcmd=Toggle endon This is my rule, exactly as it is in espeasy, and it works perfectly. (Cozinha=kitchen and Luz=light) You dont need if/else/endif or any other statements. J...

vojtishek

Thanks, this looks promisely. Unfortunately following code cause that only values in espeasy changing accordingly. Domoticz not listening to those changes. Switch in domoticz is with idx8 as on image at the beginning of my post. I'm adding screens of settings of switches in espeasy, maybe there is s...

vojtishek

Hi guys,
could you please advise If I can use that in situation related to my post below
https://www.letscontrolit.com/forum/vie ... 687#p15687

I'm newbie in using scripts so any help more than appreciated.

Thanks
V.

vojtishek

So I have another dht22 on wemos D1 next to wemos D1 mini for comparsion. Solution seems to be to run wemos D1 mini in deep sleep mode, awaking every 60 second to send data, to reduce heat from chip. Just tested for one hour and there was a difference +1C° on d1 mini in comparsion to d1. So I've app...

vojtishek

Hi guys, thanks for trying to help me find solution, really appreciate it. @grovkillen This seems to be solution, unfortunately still not able to force domoticz switch to change status based on Momentary button status. I´ve found there is another command below which can be used somehow. Anyway when ...

vojtishek

Hi all, Maybe some of you have better experience than me. I have a light connected to sonoff and using following settings to achieve that push button on sonoff will reflecting status in domoticz. Unfortunately not working and push button didn´t change status in domoticz. http://oi66.tinypic.com/2qle...

vojtishek

Thank you guys.
I like double/triple base solution, didn´t know something like that exist.

Just testing deep sleep mode to reduce heat on chip, currently temperature little bit more accurate.
Let´s see what will be the best solution.

I will report here then.

vojtishek

Hi all, Do you have any idea how to isolate dht22 shield from heat of esp8266 chip? I´ve just discovered that temperature is like +3C° comparing to other reliable sensor. Root cause possibly will be heat from esp8266. It is slightly changing so I don´t want to reduce that by formula. Any help apprec...

vojtishek

Hello, I have the same function in my ESP12. Try this: A new Device: Device: Switch Input Name: Input 1st GPIO: GPIO 14 Pullup: X Inverted: X Switch Type: Switch Switch Button Type: Push Button Active Low Value Name 1: Pushbutton Rules: on Input#Pushbutton do if [Input#Pushbutton]=1 event switchon ...

vojtishek

I´ve was able to use gpio14 for it but over the wifi and there is delay of course.

Could you please advise how to put script inside espeasy firmware to switch on/off light via manual switch with immediate reaction?

Your help much appreciated.

Thank you
Vojta

vojtishek

Ok, I will buy.
Thanks

vojtishek

I'm using this one without any problem.

https://www.aliexpress.com/item/1PCS-CH ... 0.0.lbFk6h

There is a switch between 3.3v and 5v.

vojtishek

Thank you, much appreciated. Currently I have only RGB led strip, but I will order RGBW.
Script is clear, even for me

.

Do you know If there is any way how to achieve white colour on RGB led strip?

vojtishek

white does work however you have to setup a script to control it individually via a slider / dimmer in domoticz to control it on etiher pin 4 or 14 depending which white channel you use I'll see if I can find the script when I get home Fact is that I have RGB Led strip and would like to "simul...

vojtishek

That will be the most probable the issue. You need to solder all pins really properly, otherwise it won't work.
It's little bit challenging, I can say

.

vojtishek

Hi everyone, I saw video when was introduced ability to on/off sonoff with manual switch connected to gpio14 and GND. I was not succesfull on espeasy flashed sonoff. Do you have any experience with that? Goal is to implement sonoff next to wall switch to be able to control it from domoticz as well a...

Search found 70 matches