Search found 56 matches
- 20 Sep 2017, 08:30
- Forum: ESP Easy: General Discussion
- Topic: Trying to use buzzer in espeasy[SOLVED]
- Replies: 11
- Views: 12273
- 19 Sep 2017, 11:20
- Forum: ESP Easy: General Discussion
- Topic: Trying to use buzzer in espeasy[SOLVED]
- Replies: 11
- Views: 12273
Re: Trying to use buzzer in espeasy
tried rtttl command but same error message
http://192.168.1.99/control?cmd=rtttl,1 ... =180,c,e,g
Unknown or restricted command!
http://192.168.1.99/control?cmd=rtttl,1 ... =180,c,e,g
Unknown or restricted command!
- 19 Sep 2017, 10:52
- Forum: ESP Easy: General Discussion
- Topic: Trying to use buzzer in espeasy[SOLVED]
- Replies: 11
- Views: 12273
Trying to use buzzer in espeasy[SOLVED]
I am using espeasy v2.0.0-dev11 when I use the pulse command http://192.168.1.99/control?cmd=Pulse,14,1,200 I am able to get a beep from the buzzer but I can't seem to use the tone command when I use the tone command http://192.168.1.99/control?cmd=tone,14,330,2000 I get this error message Unknown o...
- 29 Aug 2017, 11:39
- Forum: ESP Easy: General Discussion
- Topic: need help in rules
- Replies: 7
- Views: 6111
Re: need help in rules
will try
Thanks
Thanks
- 29 Aug 2017, 04:56
- Forum: ESP Easy: General Discussion
- Topic: need help in rules
- Replies: 7
- Views: 6111
Re: need help in rules
lock is a pushbutton in domoticz which I use to activate gpio13 to 1 and 0
this is the log
this is the log
- 29 Aug 2017, 04:51
- Forum: ESP Easy: General Discussion
- Topic: need help in rules
- Replies: 7
- Views: 6111
Re: need help in rules
I have tried this but does not work
on lock#Switch do
if [lock#Switch]=0
NeoPixelAll,0,0,255
timerSet 1,30 // 30 sec timer
endon
on Rules#Timer=1 do
NeoPixelAll,0,0,0
endif
endon
on lock#Switch do
if [lock#Switch]=0
NeoPixelAll,0,0,255
timerSet 1,30 // 30 sec timer
endon
on Rules#Timer=1 do
NeoPixelAll,0,0,0
endif
endon
- 29 Aug 2017, 04:49
- Forum: ESP Easy: General Discussion
- Topic: need help in rules
- Replies: 7
- Views: 6111
- 28 Aug 2017, 21:37
- Forum: ESP Easy: General Discussion
- Topic: need help in rules
- Replies: 7
- Views: 6111
need help in rules
I am trying this in Rules
on GPIO13#value do
if [GPIO13#value] = 0
NeoPixelAll,0,0,255
timerSet 1,30 // 30 sec timer
endon
on Rules#Timer=1 do
NeoPixelAll,0,0,0
endif
endon
but it does not trigger and nothing happens.
Thanks in advance
on GPIO13#value do
if [GPIO13#value] = 0
NeoPixelAll,0,0,255
timerSet 1,30 // 30 sec timer
endon
on Rules#Timer=1 do
NeoPixelAll,0,0,0
endif
endon
but it does not trigger and nothing happens.
Thanks in advance
- 16 Aug 2017, 18:09
- Forum: ESP Easy: Projects / Applications
- Topic: Project Help: ESP8266/Prowl Push Notification
- Replies: 2
- Views: 3559
Re: Project Help: ESP8266/Prowl Push Notification
I get prowl notifications using this method
Thingspeak------>PushingBox------>Prowl
or
using domoticz
Thingspeak------>PushingBox------>Prowl
or
using domoticz
- 14 Aug 2017, 22:30
- Forum: ESP Easy: General Discussion
- Topic: changing webserver port in V2
- Replies: 1
- Views: 2331
changing webserver port in V2
hi
how can I change the webserver port in espeasy ver 2
Thanks
how can I change the webserver port in espeasy ver 2
Thanks
- 30 Jul 2017, 06:23
- Forum: ESP Easy: Hardware
- Topic: HC-SR501 PIR - stop false positives?
- Replies: 47
- Views: 102966
Re: HC-SR501 PIR - stop false positives?
Although this is an old thread - i guess some people might still be interested how to definately solfe the RF-induced false triggering problem. You simple need to solder a 220nF ceramic capacitor across pin12 und pin13 of the chip (BISS0001) so that the high-frequency interference coming from the E...
- 16 Oct 2016, 06:00
- Forum: ESP Easy: Projects / Applications
- Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
- Replies: 94
- Views: 183028
- 05 Sep 2016, 09:58
- Forum: RFLink: Unsupported devices
- Topic: Chinese Welcome Chime Alarm
- Replies: 5
- Views: 6115
Re: Chinese Welcome Chime Alarm
hi
have you been able to get this chime to work reliably in RFlink ?
have you been able to get this chime to work reliably in RFlink ?
- 25 Aug 2016, 10:34
- Forum: RFlink: General Discussions
- Topic: Energenie ENER002
- Replies: 4
- Views: 5110
Re: Energenie ENER002
These Energenie switches are working perfectly in RFXtrx433 controller but can't get them working in RFLink
- 25 Aug 2016, 10:29
- Forum: RFlink: General Discussions
- Topic: 433mhz pir sensor [solved]
- Replies: 1
- Views: 3838
Re: 433mhz pir sensor
solved it by doing this
- 25 Aug 2016, 09:58
- Forum: RFlink: General Discussions
- Topic: 433mhz pir sensor [solved]
- Replies: 1
- Views: 3838
433mhz pir sensor [solved]
hi i have bought this pir sensor http://www.aliexpress.com/item/Coding-EV1527-Wireless-PIR-Motion-Sensor-Detector-For-Wireless-GSM-PSTN-Auto-Dial-Home-Security-Alarm/32635210696.html?spm=2114.01010208.3.178.yNJxWv&ws_ab_test=searchweb201556_0,searchweb201602_2_10057_10056_10065_10055_10054_10059...
- 23 Aug 2016, 20:06
- Forum: RFlink: General Discussions
- Topic: 100m Wireless Transmission Soil Humidity Tester
- Replies: 1
- Views: 3268
- 20 Aug 2016, 08:20
- Forum: RFlink: General Discussions
- Topic: Energenie ENER002
- Replies: 4
- Views: 5110
Energenie ENER002
hi
i have these switches
https://energenie4u.co.uk/catalogue/pro ... 002-2PI-RT
is it possible to control them through RFlink
Thanks
i have these switches
https://energenie4u.co.uk/catalogue/pro ... 002-2PI-RT
is it possible to control them through RFlink
Thanks
- 20 Aug 2016, 08:15
- Forum: RFlink: General Discussions
- Topic: Byron SX-15iw
- Replies: 1
- Views: 3196
Byron SX-15iw
hi does this doorbell work with RFlink
Byron SX-15iw
http://doorchimesuk.co.uk/catalog/produ ... ucts_id=48
Thanks
Byron SX-15iw
http://doorchimesuk.co.uk/catalog/produ ... ucts_id=48
Thanks
- 27 Jul 2016, 11:01
- Forum: ESP Easy: General Discussion
- Topic: HB100 Microwave Motion Sensor
- Replies: 2
- Views: 6653
HB100 Microwave Motion Sensor
hi
can i use this HB100 Microwave Motion Sensor as a switch (like a pir sensor) in esp-easy
can i use this HB100 Microwave Motion Sensor as a switch (like a pir sensor) in esp-easy
- 23 Jul 2016, 05:42
- Forum: ESP Easy: General Discussion
- Topic: change the default port 80 in esp easy [SOLVED]
- Replies: 3
- Views: 6878
Re: esp-easy port 80
Thanks
- 21 Jul 2016, 19:46
- Forum: ESP Easy: General Discussion
- Topic: change the default port 80 in esp easy [SOLVED]
- Replies: 3
- Views: 6878
change the default port 80 in esp easy [SOLVED]
is it possible to change the default port 80 in esp easy.
- 20 Jul 2016, 07:08
- Forum: ESP Easy: General Discussion
- Topic: Battery status / level
- Replies: 6
- Views: 35807
Re: Battery status / level
is this schematic ok ?
- 19 Jul 2016, 20:01
- Forum: ESP Easy: General Discussion
- Topic: how to set time offset to india time gmt 5.30:::SOLVED:::
- Replies: 5
- Views: 5710
Re: how to set time offset to india time gmt 5.30
Thanks
works perfectly
one more question can we use system time in rules. please give example
Thanks again
works perfectly
one more question can we use system time in rules. please give example
Thanks again
- 19 Jul 2016, 14:58
- Forum: ESP Easy: General Discussion
- Topic: how to set time offset to india time gmt 5.30:::SOLVED:::
- Replies: 5
- Views: 5710
- 19 Jul 2016, 09:19
- Forum: RFLink: Hardware Related discussions
- Topic: RFlink Hardware requirement
- Replies: 1
- Views: 3407
RFlink Hardware requirement
hi
newbie here. been using esp-easy for some time now with Domoticz.
can some one guide me about the hardware needed to use RFLink
Thanks
newbie here. been using esp-easy for some time now with Domoticz.
can some one guide me about the hardware needed to use RFLink
Thanks
- 19 Jul 2016, 09:13
- Forum: ESP Easy: General Discussion
- Topic: how to set time offset to india time gmt 5.30:::SOLVED:::
- Replies: 5
- Views: 5710
how to set time offset to india time gmt 5.30:::SOLVED:::
hi
i am trying to set NTP time in my esp. But the time offset is not accepting 5.30 which india gmt time and rounding it to 5.
so i am getting the wrong system time.
please advice
Thanks
i am trying to set NTP time in my esp. But the time offset is not accepting 5.30 which india gmt time and rounding it to 5.
so i am getting the wrong system time.
please advice
Thanks
- 03 Jul 2016, 18:48
- Forum: ESP Easy: General Discussion
- Topic: globalsync between esp's on different networks
- Replies: 0
- Views: 2467
globalsync between esp's on different networks
hi
been using globalsync between esp's on my local network. Is it possible to connect esp's on different networks connected through internet by globalsync.
Thanks
been using globalsync between esp's on my local network. Is it possible to connect esp's on different networks connected through internet by globalsync.
Thanks
- 13 Apr 2016, 20:18
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
currently using espeasy --> Thingspeak ----> Pushingbox to get notifications on my smartphone.
- 13 Apr 2016, 07:52
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
Works with everything requiring 5 sec delay or more. But does not run with doorbell which requires 1 sec delay. also it still jacks the load to 100% @ 1 sec delay.
- 11 Apr 2016, 18:37
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
will try
thanks
thanks
- 09 Apr 2016, 08:33
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
i want to connect my doorbell esp to ifttt plugin. when i am keeping a delay of 5 seconds or more the notifications does not trigger. As the doorbell triggers the esp8266 for about a second or less. what delay should i keep in the settings ? when i am keeping the delay for less than 5 seconds the es...
- 09 Apr 2016, 08:28
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
yesterday what i first marked was my sonoff switches were behaving erratically. when i use to switch them on / off from domoticz the were responding erratically. As soon as i recompiled without the ifttt plugin they started working normally.
i will try again today with new esp's
i will try again today with new esp's
- 09 Apr 2016, 05:27
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
yesterday i did a lot of testing with your plugin with a variety of esp8266 modules and found that the modules become quite unresponsive after i compile the image using IFTTT plugin. The ping times which are normally in single digits increase to 300-400. After i removed the plugin and recompiled the...
- 08 Apr 2016, 19:48
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
i am unable to make it work with this esp device controlling my door lock , doorbell and reed sensor
- 08 Apr 2016, 19:43
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
works perfectly with my sonoff switch and my pir motion sensor
- 08 Apr 2016, 07:14
- Forum: ESP Easy: Software
- Topic: IFTTT Maker
- Replies: 26
- Views: 39007
Re: IFTTT Maker
how to get device identifier for device doorbell ?
- 05 Apr 2016, 21:39
- Forum: ESP Easy: Software
- Topic: run a php script on webserver
- Replies: 4
- Views: 5536
Re: run a php script on webserver
hi
i want to run it directly without a controller
i want to run it directly without a controller
- 05 Apr 2016, 05:17
- Forum: ESP Easy: Software
- Topic: run a php script on webserver
- Replies: 4
- Views: 5536
run a php script on webserver
hi
i want to execute a php script on my web server when one gpio pin turns high
demo.com/pushover.php
can anyone please guide me
Thanks
i want to execute a php script on my web server when one gpio pin turns high
demo.com/pushover.php
can anyone please guide me
Thanks
- 03 Apr 2016, 14:16
- Forum: ESP Easy: General Discussion
- Topic: Feature Request collection/list
- Replies: 197
- Views: 214641
Re: Feature Request collection/list
Notifications for Pushbullet, Pushover or Ifttt directly without domoticz server.
- 02 Apr 2016, 20:28
- Forum: ESP Easy: Hardware
- Topic: Wifi IoT Relay Board Based on ESP8266
- Replies: 7
- Views: 16600
- 15 Mar 2016, 10:15
- Forum: ESP Easy: General Discussion
- Topic: pushbullet or pushover notifications
- Replies: 1
- Views: 4167
pushbullet or pushover notifications
hi
is it possible to send notifications to pushbullet, pushover or ifttt directly without domoticz server.
Thanks
is it possible to send notifications to pushbullet, pushover or ifttt directly without domoticz server.
Thanks
- 03 Mar 2016, 06:38
- Forum: ESP Easy: General Discussion
- Topic: help for wifi status led
- Replies: 6
- Views: 19125
help for wifi status led
i have wired a wemos mini d1 as below and have selected in hardware settings wifi status led = GPIO 0.
my problem is that the led stays on continuously even when the wifi is switched off.
Thanks
my problem is that the led stays on continuously even when the wifi is switched off.
Thanks
- 23 Feb 2016, 19:36
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 901604
Re: New ESP gadget
Thanks
- 23 Feb 2016, 07:49
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 901604
Re: New ESP gadget
then is it possible to use the I2C bus
- 23 Feb 2016, 03:56
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 901604
Re: New ESP gadget
i have uploaded firmware ver 80 to this device and have been able to activate the relay and led. Now i want to attach a dht11 sensor how should i go about it, which gpio port should i use and where is it located.
Thanks
Thanks
- 14 Jan 2016, 04:28
- Forum: ESP Easy: General Discussion
- Topic: wifi signal strength
- Replies: 5
- Views: 11336
wifi signal strength
is it possible to get wifi signal strength in esp easy.
- 09 Jan 2016, 05:48
- Forum: ESP Easy: General Discussion
- Topic: Sharp Dust Sensor GP2Y10------Domoticz
- Replies: 6
- Views: 11511
Sharp Dust Sensor GP2Y10------Domoticz
hi i am trying to use the sharp dust sensor GP2Y10 to send values to domoticz air quality. i am getting values in the range of 500-550 but air quality in domoticz continuously shows 0. Do i have to give a formula in esp-easy so that values get reflected in Air-Quality. Screen Shot 2016-01-09 at 10.1...
- 09 Jan 2016, 04:01
- Forum: ESP Easy: General Discussion
- Topic: Pro-Mini Extender what should be given in port
- Replies: 2
- Views: 3628
Pro-Mini Extender what should be given in port
esp easy pro-mini extender what value should be given in port
- 05 Jan 2016, 09:50
- Forum: ESP Easy: General Discussion
- Topic: Esp module not accepting password
- Replies: 3
- Views: 8109